After inlaying the porcelain teeth, I found that the tips of the teeth were very thick, and I kept b

Updated on healthy 2024-06-27
20 answers
  1. Anonymous users2024-02-12

    This problem is quite complicated, in general, the teeth that are inlaid later, or dental implants, will not have the feeling of the original teeth, the original tooth proprioception has disappeared, there will be a lack of eating, eating is not fragrant.

    As far as biting things is concerned, it does not rely on the cusps of the teeth, the whole mouth, only the incisors have the function of cutting, and the canines mainly tear food, the molars are grinding food, and the function of the premolars is between the canines and the molars.

    No matter what dental restoration, the most important thing is not to strengthen the function of each tooth, but to restore the teeth to achieve a normal bite that fits your mouth. (If the cusp of the tooth is not sharp, everyone goes to sharpen the cusp, it can only destroy the normal occlusal relationship and cause joint trauma).

    In your case, it may be that the porcelain sleeve made by the doctor for you has changed from the original bite, in other words, he has not done it properly; It's also possible that he tried his best to do his best, but he can't be the same as before, so you can only accept it, or change to a better hospital. In general, since you don't feel so comfortable, you can adjust it again, talk to the doctor about the doubts in your heart, and he will give you a better explanation.

  2. Anonymous users2024-02-11

    You can consult a doctor with dental prostheses. I don't know how to get it Sorry, I can't help you.

  3. Anonymous users2024-02-10

    Haha redo oh and dentures are not recommended for you to bite things too often.

  4. Anonymous users2024-02-09

    It is advisable to see your primary care physician for a re-examination.

  5. Anonymous users2024-02-08

    This problem is relatively common, and the lingual side of the porcelain crown must be imitated as natural as possible in medicine. As for whether it can be imitated as natural, the doctor must leave room in case the technician can make the tongue carina, not the bevel as you say, and of course the tightness. Reduces the appearance of bad breath.

    Giving you a relatively regular tongue carina**, you can compare it.

    Generally speaking, as long as the doctor can do it, the technician can do it, if you are not satisfied, it is recommended that you upload ** (a little difficult to shoot) to help you identify.

  6. Anonymous users2024-02-07

    Totally understand how you feel, are your teeth better now? I did the teeth this year, it was too uncomfortable, the inside was very thick, the pronunciation always felt that there was something in front of the tongue, I made a front tooth, and the shape of the two front teeth is different, the height is different, now it has been used for nearly 4 months in total, and there are some small seams in the middle and on both sides, I have communicated with the doctor before, but the attitude is really not good, and extremely impatient, the teeth have been grinded, so it is not easy to say. It seems that in the future, it is better to go to a reliable place to do your teeth, don't just find a doctor, there is no guarantee.

  7. Anonymous users2024-02-06

    What we often say is: teeth and restoration, when problems are found, they are more troublesome to solve. At the beginning, it is necessary to do a variety of ** and analysis.

    But there is hope for improvement in your case. We have such cases. It's just that you're not in Beijing.

    My advice is that you should go to another dentist and see your teeth to see if you can improve it. I hope you can get your wish and don't be discouraged.

  8. Anonymous users2024-02-05

    Hello sister, I also did porcelain teeth for incisors last week, and it is like this: > porcelain teeth are more than my own front teeth, that is, the root of the teeth behind the porcelain teeth, I will also eat or something, I will knock it when I eat or something, I asked the doctor and he grinded the lower incisor teeth for me: > the result is still not good, so I grind a little porcelain teeth, the sturdiness must have an impact, but it must be more comfortable.

    Otherwise, it is uncomfortable to talk and eat.

  9. Anonymous users2024-02-04

    If you have a problem, you can definitely solve it, ask more. Don't deal with the problem of your doctor's change.

  10. Anonymous users2024-02-03

    If the porcelain tooth is unqualified, go to a regular dental hospital to check whether the various indicators of the porcelain tooth are qualified, such as the fit of the crown edge. If it is not qualified, it will be dismantled and redone.

    Trouble, thanks!

  11. Anonymous users2024-02-02

    Generally, there is no need to adjust, most of them are sensory errors, you should adapt to it for a period of time before deciding how to deal with it, if you do have a bad bite, you can adjust it, it is not too troublesome, and it should not be charged.

  12. Anonymous users2024-02-01

    The slight height can be grinded, and it will not affect the porcelain teeth, but if the difference is very large, it must be removed and redone, and generally when it is installed, the doctor will compare it with the teeth on the side, and try to bite to adjust, is this doctor not at all? It is very time-consuming for a careful doctor to adjust the grinding, but you just need to lie down and cooperate with the doctor from time to time to grit your teeth.

  13. Anonymous users2024-01-31

    It depends on how high you are and the size of your porcelain teeth, which can be polished. Otherwise, you need to take it off and reinstall it, that is to say, if it is much worse, it is better to take it off and polish the root of the porcelain tooth, rather than to polish the surface, the adjustment is very simple, you go back to the doctor who installed it, let him test the high degree of pressure value for you, and then decide how to deal with it. You have to bite more on the spot, so that the porcelain tooth can be more tightly connected to the tooth root.

  14. Anonymous users2024-01-30

    1.It is a grinding surface.

    2.Generally, no, the porcelain of the porcelain tooth will not be so thin.

    3..Okay, repeated polishing, bite experiments.

    4.There should be no charge, this is what should be done, and then the cost of full porcelain teeth.

  15. Anonymous users2024-01-29

    I don't know if the doctor pours a plaster tooth mold for you, if there is, it means that it is just a little error in processing (within the normal range), grinding some porcelain teeth without a surface or good tooth cusps can be bitten, otherwise it depends on luck.

  16. Anonymous users2024-01-28

    1. Grind the upper surface of the porcelain tooth.

    2. There should be no metal leakage.

    3. The grinding process is not troublesome.

    4. Go to the place where you get your teeth for free.

  17. Anonymous users2024-01-27

    If the porcelain tooth adjustment and installation is good, the front teeth will not touch the lower teeth, but if the porcelain tooth adjustment and installation is not proper and the occlusion is high, then the upper and lower teeth will generally appear when the upper and lower teeth are bitten, and the patient will have obvious tightness and other discomfort.

    If the porcelain tooth is too tight because of the high occlusion, it will affect the life of the porcelain tooth, and even have a serious impact on the gums and pulp, resulting in infection of the gum pulp and serious inflammation.

    In addition to the lower teeth will be pushed up to the upper teeth, if the porcelain teeth bite high, the patient will not be easy to chew food when eating, if the porcelain teeth bite is serious, the patient will even eat noodles constantly, which will seriously affect the normal eating of the patient, bringing great trouble to the patient.

  18. Anonymous users2024-01-26

    Admit bad luck, there will be more uncomfortable in the future.

  19. Anonymous users2024-01-25

    What is the reason why the teeth hurt when you bite hard things after the porcelain teeth are inlayed? How to fix it? Hello, bite-pain and percussion pain are typical symptoms of inflammation around the apex of the tooth, I wonder if your painful tooth has ever been done before**?

    Apocalyptis is usually drained from the root canal and then permanently filled with a root canal (root canal), which will destroy the porcelain tooth in your case; If your porcelain teeth cost a lot of money, click to learn more

  20. Anonymous users2024-01-24

    How Long After Porcelain Teeth Can I Eat Mine is a crown made of big teeth. If the bite is normal, it will take about 2 days to get used to it. Depending on whether you are a single crown or a long bridge, if you have multiple porcelain tooth long bridges, it may take a long time to adapt, but this also has individual differences.

Related questions
7 answers2024-06-27

Spend more money and spend less money in the future, you must be cautious to look at this, some of the current doctors have very poor medical ethics. It's better to plant it, now you go to a better hospital to get it. A tooth is a few thousand.

8 answers2024-06-27

Don't worry, your porcelain teeth won't cause your gums to recede, unless you have gum recession such as periodontal disease. >>>More

20 answers2024-06-27

It depends on what your purpose is. Is it just to make the teeth neat and beautiful? For example, if you have half of a tooth, you can make porcelain, and then if you are missing a tooth, you can make a porcelain fixed bridge to fill the missing tooth. >>>More

12 answers2024-06-27

Precautions for porcelain teeth: 1. Patients with mild discomfort when wearing porcelain teeth for the first time should practice patiently and gradually adapt. 2. Eat soft food when you first wear it, and then eat normal food after adaptation. >>>More

8 answers2024-06-27

Your ** is a bit cheap, not very believable, but porcelain teeth generally need to make a small amount of adjustment, the so-called micro adjustment means that the porcelain teeth may be a little high after the local is done, the adjacent surface is a little tight, these situations are allowed, because the porcelain teeth are done on the model, there will be a certain deformation after a few mold turns, but this coefficient is very small, that is, as long as the adjustment is a little bit, and it is to adjust the porcelain teeth, and then adjust the teeth that is the doctor's shortcomings, technical problems, As for the impact of nickel-cadmium alloy on the kidneys, we generally do not recommend doing it, because the material is poor, and the biocompatibility is not good, we generally recommend at least cobalt-chromium alloy, if you have the ability, the best all-ceramic teeth, *** almost nothing, the teeth must be done after grinding, no way, there is another problem, that is, after you do the root canal, it is generally recommended that it is best to make a pile and then do braces, which can prevent the crown from breaking, the root remains, and the porcelain falls off. Do it in time, otherwise the teeth will be displaced