What to do with a cage that has caught a mouse?

The cage that catches a mouse can also raise other small pets can also be put in a grocery store, generally we have caught the cage of the mouse is best to do a disinfector, you can wipe the cage with alcohol, and then clean it with laundry detergent and put it in the sun for a day or two.

What to do with a cage that has caught a mouse? It can be cleaned and disinfected, the smell can be removed, and then it can be discarded and put into a bucket, because iron can be reused, and if the cage is intact, it can be disinfected and continued to be used.

1. Flooding: Fill the bucket with water, put the mouse cage in it, and the mouse will be drowned after a few minutes, and then clean the bucket and mouse trap with disinfectant.

2. Exposure to the sun: mice have strong cold resistance but are afraid of heat, and can be exposed to the sun outdoors in summer and smoked in winter, and the mice will die soon.

3. Release: You can choose to release animals in the wild, but you should pay attention to choose a distant place, away from people's lives.

Flooding, this method is the most recommended, find a bucket that can submerge the rat cage, fill it with water, put the rat cage in, put it for a few minutes, and the rat will drown. Clean the bucket with disinfectant solution. Scald with hot water, scald the rat in the cage with boiling water, the rat will scurry, and the effect is a little poor.

The cage where the rat has been caught is roasted with fire until there is no odor before the next rat catch.

If you continue to use the cage that has caught mice, you can spray 84 disinfectant, alcohol disinfection and sterilization and continue to use, if you don't want to continue to use, then it is recommended to throw away or sell waste.

Came to the cage where you caught mice, what to do with it? So the cage of the mouse that we have caught is disinfected, and the cage is disinfected, so that it can be treated, otherwise the cage will let the mouse give the pigeon and the mouse, so the inside is usually big, so we disinfect, disinfect the cage, and use it again next time.

Rinse the rat cage with boiling water until there is no peculiar smell, and after scalding with boiling water, it can effectively remove the information left by the rat, or brush the rat cage with sesame oil.

After cleaning and disinfecting the cage that has caught mice, it is installed for backup, the rat cage is of good quality and can be used repeatedly, of course, it should be cleaned and disinfected before use.

If you have caught a mouse, don't use it, throw it away, because rats have a lot of bacteria, and it is best to disinfect them before disposing of them.

What to do with the cage where you have caught a mouse If you have caught a cage with a mouse, you can throw the cage away, otherwise there will be bacteria.

For cages that have caught mice, we can still disinfect them, and they must be disinfected before continuing to use them.

Flooding Haiheng rodent control company recommends this method, find a bucket that can submerge the rat cage, fill it with water and put the rat cage in, and the rat will drown after a few minutes.

Cages that have been caught with rats are prone to bacteria, so it is best to disinfect them.

Put this cage with 84 disinfectant water. Disinfect it, then put the cage back up and take it out when it's useful.

Just throw the caught rat cage in the trash.

Because rats have a lot of bacteria.

If you have been to the rat's cage, this must be disinfected, or some smell of the lid, otherwise the next time the rat will not pass from there.

Blanched with boiling water, exposed to the sun, and you can catch mice.

Generally, the cage that catches rats is still used by the householders to continue to use the catch, and some householders will sanitize and spray disinfectant.

Disinfect it, disinfect it thoroughly.

Discharge cooling is another type of convection cooling. Unlike regenerative cooling, the coolant used for exhaust cooling absorbs heat to the thrust chamber and is discharged out of the combustion chamber instead of entering the combustion chamber to participate in combustion. Direct drain coolant reduces the thrust chamber specific impulse, so the coolant flow for drain cooling needs to be minimized while only using drain cooling at the outlet section of the nozzle that is relatively less heated.

There is also radiative cooling, in which the heat flow is transferred from the combustion products to the thrust chamber, and then the heat is radiated by the thrust chamber wall to the surrounding space. Radiative cooling is characterized by simplicity and small structural mass. It is mainly used in the extension section of large nozzles and the thrust chamber of small thrust engines using high-temperature resistant materials.

When cooling in the thrust chamber of the tissue, a relatively low temperature liquid or gas protective layer is established on the surface of the thrust chamber wall to reduce the heat flow to the thrust chamber wall, reduce the wall temperature, and achieve cooling. Internal cooling is mainly divided into three methods: internal cooling (shield cooling), membrane cooling and diaphoretic cooling of head tissues. After the internal cooling measures are adopted in the thrust chamber, the mixing ratio near the wall of the combustion chamber is different from the optimal mixing ratio in the central area (in most cases, the near-wall layer rich in fuel is used) due to the need to reduce the temperature of the protective layer, resulting in the uneven distribution of the mixing ratio along the cross-section of the combustion chamber, so that the combustion efficiency is reduced to a certain extent.

Membrane cooling is similar to shield cooling in that it cools the thrust chamber wall by establishing a uniform and stable coolant film or air film protective layer near the inner wall surface, except that the coolant used to establish the protective layer is not injected by the injector, but is supplied through a special cooling belt. The cooling band is generally arranged in a cross-section of the combustion chamber or the convergence section of the nozzle. There can be several cooling bands along the length of the combustion chamber.

In order to improve the stability of the membrane, the coolant often flows through the gaps or small holes in the cooling belts, and when sweating is used, the thrust chamber wall or part of the inner wall is made of porous material with a pore diameter of tens of microns. Porous materials are usually sintered with metal powders or pressed with metal mesh. In this case, the number of pores per unit area is increased by making the micropores in the material as evenly distributed as possible.

The liquid coolant penetrates into the inner wall, creating a protective film that reduces the density of the heat transferred to the wall. When the flow rate of liquid coolant used for sweat cooling is above a certain threshold, a liquid film is formed near the wall of the thrust chamber. When the coolant flow rate is below the critical flow, the inner wall temperature will be higher than the coolant boiling point at the current pressure, and some or all of the coolant will evaporate, forming an air film.

In addition to the above thermal protection, there are other thermal protection methods such as: ablation cooling, thermal insulation cooling, hot melt cooling and composite protection of chamber walls. 3. Thermal protection scheme of high enthalpy gas generator Based on the above methods and the actual situation, the thermal protection method of high enthalpy gas generator is obtained.

The combustion chamber of a high-enthalpy gas generator differs from that of a liquid rocket engine, eliminating the front thrust chamber part, making its structure simpler and more effective. Then, the thermal protection involved is the thermal protection part of the combustion chamber wall. As the fuel enters the combustion chamber, it quickly decomposes and releases large quantities.

Clause.

1. Ignore it and let it die of hunger and thirst.

Clause. 2. Find a big cat that can catch mice in advance, put the cat and the cage in a relatively empty room, and then release the mice in the cage for the cat to prey.

Clause. 3. Drown the cage in deep water along with the rat and let the rat suffocate to death.

Because rats carry a variety of infectious diseases, it is important to wash your hands and disinfect your belongings, regardless of the treatment method.

Unlock a new way to die a rat:

Caught a mouse with a mouse cage, put it all day, came back from work at night and found that the mouse couldn't help it, and when there were people next to it, he kept biting the cage, and the husband carried the cage to the door on the sixth floor of the staircase to open the cage door at the same time, the mouse was strung out in a second, and it was greeted by a free fall movement at a height of about 18 meters, only to hear a snap, it should have no sequel......

If I catch it in an iron cage, I will only use the three methods that I think are most merciful to make it enjoyable: first, pour boiling water into the iron cage, second, then take the iron cage to the fire and roast it for six or seven minutes, third, after the first two means, it will definitely die, and the third means will pour its corpse out of the cage, tie it with powerful firecrackers, and give it one last blow, believing that it will definitely die comfortably.

You can find a clip to catch the mouse and kill it, you can also immerse yourself in water and drown, and of course you can release it for the cat to play with.

If you want to hurt people, put them in other people's homes, and raise them if you like them.

I studied chemistry. There's an idea that you can put two chemical ingredients that can react into two pieces of ham and give it it, and I don't know if it's going to react in its stomach and torture it, and it's funny manually.

The cage was submerged in the water for half an hour and drowned!

If it died, it was thrown away, and it drowned if it didn't die.

Put it in the water and drown the rats.

Get a hydrogen balloon