The bathroom decoration is dry and wet, can it be installed with a smart toilet cover?

It is best to do a dry and wet separation at home, the advantage of dry and wet partitions is that you can take a bath and go to the toilet at the same time, and after taking a bath, you will not get the whole bathroom with water. If you don't plan to renovate the bathroom, it is recommended that you install a shower curtain to achieve dry and wet separation, which is a more convenient way.

Smart toilet lid purchase: 1. Look at the gloss of the glaze, the gloss is good, ***. 2. See whether there is a difference between urine and urine, and whether it is water-saving.

3. See if it uses the secondary siphon skill, so that it is clean, and the table tennis ball is used as a test, and the toilet can be flushed down forty or fifty. 4. It is to open the upper cover plate to see whether the built-in scouring accessories are products produced by brand manufacturers, which is very critical and can be known from the outside. 5. See whether it is a molding skill, see whether there is a hoop in the direction of a line between the back of the toilet and the plane of the cover, if there is one, it is not a one-time molding, and the price should be reduced by a level, and what is not is a molding skill.

Royalstar smart toilet seat is good, you can consider it!

This problem is a typical problem, for the decoration has been done, the easiest way is to sacrifice a little bit of "beauty", such as using the same color of the tile along the corner, the edge of the ceiling or simply in the ceiling gusset line is basically not visible, because health is more important than aesthetics.

In addition, the Ministry of Construction has now stipulated that real estate developers should reserve power sockets next to the toilet in the toilet of the new housing in the future, and now the houses that do not meet this requirement in large cities will not be accepted, so as to facilitate the use of smart bathrooms in the future.

If you only look at it from the point of view of the smart toilet seat, it is not affected by the separation of dry and wet - it can be installed with or without dry and wet separation. However, if the bathroom does not separate dry and wet, or the toilet is placed in the wet area during the separation of dry and wet (small toilets are generally so dry), you need to pay attention to the following two problems when installing the smart toilet cover. It can be understood that as long as you don't soak the smart toilet seat directly in the water, there is no problem.

The showers, faucets, etc., that we are worried about, do no harm to the smart toilet seat. It can be installed, but it is still recommended that the subject do dry and wet separation, normally speaking, the design of the current commercial housing can meet the design of dry and wet separation!

<> addition to this, when we choose the type of smart toilet seat, we try to choose a smart toilet cover with a three-pole power-off protection plug, because this type of smart toilet seat, once the circuit is dangerous due to any reason, it will automatically cut off the power supply to prevent dangerous accidents from happening! There is no problem with the toilet seat, it is best to buy one with a little brand power, before buying a smart toilet cover, you can check whether the main body of the toilet seat is waterproof, and if the wall socket does not have a waterproof cover, you must install a waterproof cover. Smart toilets choose some waterproof ***, generally good sockets can also play a waterproof and leakage process, in fact, don't worry too much, after all, as long as the bottom line is connected, the three inspections are still very safe.

There are four square meters, and it is impossible to do dry and wet separation, because the developer does the drain is dead, and the drainage on the same floor is good to say, it is a big deal to smash the bathroom floor, and then according to their own preferences, re-layout, dry and wet separation. If it is a drainage under the hetero-laminated board, it is not easy to change the water, first of all, the socket. The smart toilet requires electricity to start, which requires the connection of an outlet.

Toilets are waterproof, and sockets and plugs may not be waterproof. You can install a waterproof box with a waterproof rating of IPX4 or above in the socket, which is much safer. It is not recommended to install it because it is afraid that it will leak electricity if it is drenched with water.

Unless the sprinkler head is a little further away from the toilet.

Absolutely. Because whether to use a smart toilet and whether the bathroom has dry and wet separation are two different things, and there is no connection between the two. If you like smart toilets, you can choose to install them, there is no need to think too much, you can do whatever you like.

No. Because the smart toilet is an electronic product, if it is not separated from dry and wet, it is easy to cause water ingress.

The bathroom can also use a smart toilet if it does not do dry and wet separation, and now many smart toilets are not afraid of water, and the smart toilet with waterproof function can remind the salesperson when choosing.

Nowadays, many old toilets do not have dry and wet separation, which makes it more difficult to install a smart toilet lid in the middle and later stages. Many customers don't know whether the wet area can be equipped with a smart toilet lid without distinguishing between toilets, so let's introduce it to us today.

Can a smart toilet seat be installed in a toilet without distinguishing between wet areas? Although many intelligent toilet seats are waterproof, if there is too much water, some situations will still occur, which will undoubtedly reduce the service life. If there are water droplets everywhere after taking a shower, it is best to wipe them off.

It is best to do a dry and wet separation at home, and the benefit of the wet area system partition is that it is not delayed to pee in the bath, and it is not easy to make all the bathrooms full of water after the bath. If you are not planning to renovate the bathroom, it is highly recommended that you install a bathroom shower curtain to separate dry and wet, which is also a more convenient and fast way.

1.Look at the smoothness of the glaze layer, the smoothness is good, and the cost performance is high.

2.See if you are going to the toilet and whether you are saving water.

3.See if it is applied to the secondary siphon professional skills, so that the flush is neat, with a table tennis game for experiments, cost-effective toilets can be flushed down forty or fifty.

4.It is very important to open the upper back cover to see whether the embedded flushing parts are produced by well-known brand manufacturers, which can be understood from the outside.

5.See if it is a forming professional skill to be applied, to see whether the direction of a line behind the toilet and the rear cover plate is a hoop, if there is one, it is not a forming, ** also needs to be lowered a level, there is no one forming professional skills.

If there is no wet area in the bathroom decoration at home, and I want to install a smart toilet cover, I advise you to eliminate this idea, because the smart toilet seat must be plugged in, it is very easy to run electricity, causing damage to everyone.

Recently, my shower room was renovated due to waterproofing problems. This kind of coming day, thinking about it, wants to install a smart toilet at home. I objected, the toilet is good and not broken, why should it be replaced with a new one, it is so expensive, but the husband nagged, and finally everyone made a compromise:

Don't change the toilet, just change a smart toilet seat.

But I think the price of the smart toilet is too expensive, and if I buy it back, the toilet in the bathroom will be consumed. There are also too many functions of smart toilets. It's okay for the boys in the technology stream, but there are elders and children in the family, and they don't know much about the various modules of the smart toilet, and they can't use it if they install it.

In addition, once the smart toilet is destroyed, it is difficult to repair and expensive. Naturally, the smart toilet seat can be drawn.

Suppose some people tell me, do you want a smart toilet seat in the shower? Suffice it to say that after installing the smart toilet seat, I did regret it. I regret that I didn't buy it sooner.

It is very easy to install and disassemble, and you can install it by selecting the appropriate specifications of the original toilet. And after going to the toilet, it can be cleaned with warm boiled water, which is much cleaner than the application of paper towels, and today's toilet paper may also have a luminous agent, which will be harmful to the human body if touched for a long time, especially for children.

Yes, because the smart toilet is particularly cost-effective, the usage rate is very high, and the quality of life can be improved, but the bathroom must do a good job of separating dry and wet.

Of course not. The bathroom does not do dry and wet separation, and the water will splash on the toilet when taking a bath, and if the smart toilet is installed, it will cause a short circuit in the line.

Smart toilets can be installed, because such a situation does not affect the installation of smart toilets, and dry and wet separation does not necessarily have to be installed.

Smart toilets can be installed. Because the absence of dry and wet separation does not affect the installation of smart toilets, there is no direct relationship between the two.

You can install a smart toilet, because the smart toilet will have a lot of functions on it, and there will be no leakage.

If there is no dry and wet separation in the bathroom, can I use a smart toilet?

Hello dear. Your question is answered as follows. OK.

Even if the bathroom does not separate dry and wet, it is possible to install a smart toilet. Whether a smart toilet is installed in the bathroom is actually the same as whether the bathroom is. Even if the surface of the smart toilet is accidentally splashed with water, the smart toilet will not be affected.

As long as it is not to put the smart toilet thoroughly. From the perspective of smart toilets, smart toilets are not affected by dry and wet separation, so regardless of whether there is dry and wet separation in the bathroom.

It's okay to have a good smart experience, and it feels very convenient. It can also save a lot of space, and the overall will look premium.

Yes, because the bathroom is equipped with a smart toilet cover, it has nothing to do with the separation of dry and wet, and the smart toilet can have a strong waterproof function, which is particularly practical.

There is no dry and wet separation in the bathroom, it is not recommended to install a smart toilet cover, there are many electronic components in the smart toilet cover, which is easy to be corroded by water vapor and cause dysfunction or damage.

The toilet can not be said to be able to do only dry and wet separation, dry and wet separation is also popular at home, but in recent years, the popular in the toilet has not yet been mixed with dry and wet separation There is no problem, that is, to clean up some relative problems from the hygiene, are the toilet every time after taking a bath and then get up, in order to ensure its overall cleanliness, but also for safety reasons; Because the ground is wet, it is easy to slip and fall, causing safety problems.

In the past, most of us lived in a house, all of them belonged to the single family, relatively few, like now, many people live in one building, so in the past, we lived in a relatively large house, and the bathroom and shower room were separated, so in the past, there was no such concept of dry and wet separated toilets. But now because there are more and more commercial houses, most people live in commercial houses, and the ** is getting higher and higher, so the small apartments with a lot of living area are used to meet the living needs of the people who just need it.

The area of commercial housing is not, in the past, our house area was so large, all in the big city is very much, every inch of land is expensive, there are few toilets and showers like this separate. The toilet and shower room are together, so when people decorate their houses now, we can consider a question, do we need to separate the toilet from dry and wet? In fact, it is also very good to make the bathroom dry and wet separate, because after the bathroom is made like this, it can ensure that the bathroom will not be too humid, because bacteria are most likely to breed in warm and humid places.

But that's not to say that all toilets are suitable for wet and dry separation. First of all, the toilet needs to be big enough. If there are only three or four square toilets, and you have to forcibly separate the wet and dry, it will lead to which area becomes very narrow and becomes unused.

So we do dry and wet separation of the toilet is to adapt measures to local conditions, starting from the actual layout, can not be forced, if you really want to force, the method of dry and wet separation, it is best not to use the way of glass doors, you can use the form of shutters, or the form of curtains, this curtain is not talking about the living room, there are shower curtains on the market can be bought.

Nowadays, in the process of home decoration, many people like to make the bathroom dry and wet separated. If the bathroom cannot be separated from wet and dry, try not to use a smart dock.

Smart toilets can be installed, and the installation of smart toilets has a lot to do with the size of the toilet, but it has little to do with the separation of dry and wet.

It really can, as long as the space in the bathroom is large enough, the installation of a smart toilet will not have any impact, and the smart toilet is very easy to use.