How to solve the elevator display stop? 100

Generally, there may be a maintenance ** in the elevator, call it with a mobile phone, otherwise call something else**, such as 110 or, something else**, or call an acquaintance** and ask the other party to call something else** to find someone to save you, let them go to the maintenance personnel!

You have been pressed an emergency stop, or the safety circuit is blocked.

How to solve the elevator display stop? The elevator display stops, it may be that there is a problem with the controller of the elevator, check and repair it!

First of all, you should check whether there is a problem with the button switch in the elevator and the travel switch on each floor, and check whether there is a problem with the drive device of the elevator?

Summary. 1.The escalator itself has an under-voltage protection function, which will automatically stop running when the voltage is too low.

Hello, glad to answer for you! Escalators stop running on their own for a variety of reasons:

1.The escalator itself has an under-voltage protection function, which will automatically stop running when the voltage is too low.

2.The escalator will automatically stop running when it encounters overload and mechanical failure.

3.There is an emergency stop button on the escalator, which can artificially stop the operation of the escalator in the event of an accident.

4.It is also possible that the mall is about to close and is not accepting customers, so the escalator stops running.

I hope mine will be helpful to you and I wish you a happy life

Summary. Hello dear, I am glad to answer for you: there will be a situation of being trapped in a sudden power failure during the operation of the elevator.

If there is a sudden power failure or power supply line failure during the operation of the elevator, the elevator will automatically stop running, and there will be no danger. Because the elevator itself is equipped with electrical and mechanical safety devices, once the power fails, the brake of the elevator will automatically brake, so that the elevator can not operate. In addition, if there is a planned power outage in the power supply department, the elevator may stop operating in advance if it is notified in advance.

When the elevator is out of power, there is a safety gear at the bottom of the car, which will jam the guide rail, and the car will be fixed on the guide rail and will not slide down. Some elevator control cabinets have emergency power supply, when the power is suddenly out, the power in the emergency power supply is enough to send the car to the floor, open the door to let passengers come out safely.

What happens when there is a sudden power outage during elevator operation.

Hello dear, I am glad to answer for you: there will be a situation of being trapped in a sudden power failure during the operation of the elevator. If there is a sudden power failure or power supply line failure during the operation of the elevator, the elevator will automatically stop running, and there will be no danger.

Because the elevator itself is equipped with electrical and mechanical safety devices, once the power fails, the brake of the elevator will automatically brake, so that the elevator can not operate. In addition, if there is a planned power outage in the power supply department, the elevator may stop operating in advance if it is notified in advance. When the elevator is out of power, there is a safety gear at the bottom of the car, which will jam the guide rail, and the car will be fixed on the guide rail and will not slide down.

Some elevator control cabinets have emergency power supply, when the power is suddenly out, the power in the emergency power supply is enough to send the car to the floor, open the door to let passengers come out safely.

1. First of all, don't be anxious, there is an elevator alarm ** to call, if not, use your mobile phone for help, the elevator has a contact number. The elevator has a power outage but the lighting inside should be there. If not, it's a substandard elevator.

2. Wait patiently after the fight, if there are not many people, you can do it inside, maintain your physical strength, and don't have to shout loudly. 3. Roughly analyze what causes power outages, such as natural disasters (**, no lighting in all power outages), fires (forced power outages), human factors (people beating can cause the elevator to stop), and there is a real power outage (elevator stop). 4. Then deal with it.

1 2 Be prepared to save yourself, and listen to the outside if you contact the outside. 3 4 can wait to get outside rescue. 5. If there are two power supplies in a large unit, the power outage is a while, and the situation of the elevator after the call is observed.

6. If it is a power supply, someone must come to open the door for you after leveling, and it is very dangerous to save yourself. Don't try to open the door yourself.

01. If the elevator suddenly stops running and we are trapped in the elevator, don't panic at this time to calm down and find a way to call for help. 02. There is this alarm in the elevator, we press this alarm, and then wait for rescue in the elevator, do not shout, and maintain physical strength. 03. In the elevator, there is generally this **monitoring, as well as this emergency distress**, we can ask for help like the staff in this monitoring room.

04. In order to prevent the elevator from falling, we can press the floor below the elevator every time, so that it can play a certain control when the elevator falls. 05. Do not jump in the elevator, which may cause the elevator to fall, and fix your body on the elevator when the elevator slides.

The elevator display stop solution is as follows:

1. When the elevator stops, you should immediately use the alarm bell or walkie-talkie in the elevator to get in touch with the outside world and get rescue.

2. If you can't get in touch with the outside world, you can knock on the elevator door or call for help from time to time, and try to let people outside know, but don't be too filial and simple to consume physical strength.

3. Or lean against the elevator wall, try to adjust your breathing, and restrain your fear.

4. If the elevator continues to fall, you can press the button on each floor, hoping that the elevator braking system will work on a certain floor as usual.

5. If the elevator is continuously descending, and there is no handrail in the elevator, it is recommended to hold the neck with your hands to avoid neck injury, bend the knees, and in order to bear the heavy pressure more, point the toes on the ground and lift the heels to play a role in slowing down the impulse.

Safety precautions for elevator use:

1. Pay attention to overrun and overload.

The elevator should not be overloaded, and when the elevator alarms, it should take the initiative to exit and wait for the next trip.

2. Do not block the elevator door.

When the elevator door is about to close, do not force the elevator to rush into the elevator, prevent the elevator from closing, and do not stay with one foot inside and one foot outside, which will be hurt.

3. Do not press the emergency button casually.

The panic button is set up to deal with unexpected situations, and the elevator should never press the panic button when it is operating normally.

4. Operate without opening the door.

When taking the elevator, if the elevator door is not closed and it runs, it means that the elevator is faulty, and passengers should not take it, and at the same time report it to the maintenance personnel.

5. Do not take the elevator under maintenance.

Before coming to the elevator, passengers first look to see if there is a "stop the elevator maintenance" sign. If the elevator is in the track pants for maintenance, it should be hung with such a sign and passengers should not take it. <>

Summary. Hello dear, after the normal use of the elevator power failure, the sudden call failure, the usual situation:

1. The phase sequence has changed, and the phase sequence fails;

2. Floor data loss or error protection needs to be re-tuned;

3. Sudden power failure or power-on, a certain accessory is damaged by strong current.

Why does the elevator suddenly have a power outage?

Hello dear The normal use of the elevator after the power outage suddenly comes to the fault of the usual situation: 1, the phase sequence has changed, the phase sequence failure; 2. Floor data loss or error protection needs to be re-tuned; 3. Sudden power failure or power-on, a certain accessory is damaged by strong current.

Ask about custom messages].

The reasons for the sudden stop of the escalator during operation are as follows:1. Failure of the step: The step is the place where the passenger stands on the elevator, and it is also a component that runs continuously.

The change is caused by environmental conditions, human factors, and the parts themselves.

2. The failure of the traction chain: the traction chain is the largest stressed part of the escalator, due to the long-term operation, the wear is correspondingly serious, and the main faults include: lubrication system failure; The traction chain is severely worn; The traction chain is severely elongated.

Troubleshooting method of traction chain: replace traction chain; Adjust the tensioning device of the traction chain to talk about the blindness; Dust the traction chain.

3. Void faults of the driving device: the main faults include the abnormal noise of the driving device; The temperature rise of the drive is too fast and too high.