How to get a computer to turn on wifi for a mobile phone

You must have a wireless network card to set up wifi

First, turn on your computer, select "Computer" or "My Computer", and right-click to enter the "Manage" option.

Then find the "WLAN AutoConfig" service and the "WWAN AutoConfig" service at the bottom of the service list, and start both services.

Now that the service is turned on, the configuration of the wireless hotspot is now underway. Move the mouse over the lower-left corner, right-click, and select Command Prompt (Administrator).

In the Command Prompt (Administrator) window, enter the command line: netsh wlan show drive to check whether the bearer network is supported, only after the above two services "WLAN Autoconfig" and "WWAN Autoconfig" are enabled, the bearer network will be supported, otherwise the wireless hotspot cannot be successfully set.

Then enter the command line: netsh wlan set hostednetwork mode =allow ssid=123 key=88888888

Enter the name of the WiFi hotspot after "ssid=".

key="Enter the password of the wireless hotspot, at least 8 digits.

Finally, enter the command line: netsh wlan start hostednetwork

2. You need to have a certain knowledge of computer operation, and use a laptop wireless network card to set up a new wifi hotspot to share the wired network "local connection", which is more cumbersome, and not safe, you need to turn off the firewall or something, so it will not be repeated.

Method 1: 1. First of all, you need to open "My Computer", find "Control Panel", and select "Network and IntetNet" to enter;

2. Open the "Network and IntetNet" page, and select "View Network Status and Tasks" under the "Network and Sharing Center" category.

3. Select "Manage Wi-Fi", click "Add" in the upper left corner, and fill in the Wi-Fi network step by step according to the prompts;

4. Turn on the wifi function of the mobile phone, find the corresponding wifi, and enter the password to use it.

2. Enter the hotspot password on the left side, and then click "Start";

3. Turn on the wifi function of the mobile phone, find the corresponding wifi, and enter the password to use.

The computer can also be connected to the hotspot of the mobile phone by opening the "Settings" of the mobile phone; Go to "Personal Hotspot"; Set the name and password of the personal hotspot, and turn on the hotspot after setting. Open the "Network Settings" in your computer and connect to the hotspot.

1. First, right-click the start icon in the lower left corner of the computer and click "Settings", as shown in the figure below.

2. Then in the settings window that opens, click "Network & Internet" as shown in the image below.

3. Then in the page that opens, click "Mobile Hotspot" on the left side, as shown in the figure below.

4. Then in the page that opens, click the switch button under the mobile hotspot, as shown in the figure below.

5. Wait for a while to see that the mobile hotspot has been turned on, you can click "" to set the name and password of the mobile hotspot, or you can not set it, directly use the default name and password, and then find the corresponding hotspot name on the mobile phone wifi, enter the password to connect to the network.

Here's how to set it up:

First of all, prepare: tools Materials: laptops.

1. Find the win key and R key on the keyboard.

2. Press and hold the win key and the r key at the same time, and enter cmd in the [Run] that pops up.

3. After entering cmd, press the [Enter] button directly, and the following interface will appear.

4. Copy command 1: netsh wlan set hostednetwork mode=allow ssid=good key=12345678, and in the command prompt window, select Paste.

5. After pasting the command in step 4, press [Enter] directly, and the following prompt will appear, which means that the virtual wireless network card has been successfully established.

6. Then continue to paste command 2: netsh wlan start hostednetwork in the above window, if the following figure appears, it means that the wireless network has been successfully opened.

7. Find the network connection icon on the system tray in the lower right corner of the desktop, and press the right mouse button and select [Open Network and Sharing Center] to open the following window.

8. Click [Change Adapter Settings] in the figure above to display the following window.

9. Select [Local Connection] in the above figure, right-click, and select [Properties] to appear in the window as shown below.

10. After selecting the [Share] tab in the above figure, the interface appears as shown below.

11. Check Wi-Fi connection 2 in the window that appears above.

12. At this time, take a look at the three icons in our network connection, as shown below.

Tools: Desktop computers.

System: win10 1903.

1. Click the network mark in the lower right corner of the computer, as shown in the figure below

2. Then tap Network & Network Settings. As shown in the figure below:

3. Then tap Mobile Hotspot. As shown in the figure below:

4. Then find the switch of the mobile hotspot on the right side, which is off by default. As shown in the figure below:

5. After turning on the switch, there will be a hotspot network. As shown in the figure below:

Many friends should know that the mobile phone can be used to open a hotspot for the computer or share it for their disassembly and other friends, but they don't know that the computer can also be used for the hotspot for the mobile phone. In fact, the win10 system comes with the function of mobile wifi,If your computer is not the win10 system, of course, there is a way to destroy it,The following is for you to sort out two ways to turn on the wifi on the computer,Come and take a look。

How to turn on wifi on the computer for mobile phones

Method 1:

1. Click the dialog box in the lower right corner of the computer;

2. Find the mobile hotspot and click to open it;

3. In this way, the computer will turn on the wifi, and the mobile phone can be connected to the wifi to access the Internet;

4. However, the default wifi password of the general system is more complicated, if you want to change the wifi password, just right-click and click to jump to the settings;

5. Click in Settings;

6. After setting the password again, click Save.

Method 2:

1. Open the 360 Security Guard on the computer, and then click on the function list above;

2. Find and turn on the free Wi-Fi function in the function encyclopedia;

3. Right-click the wifi icon, and then click to open the settings center;

4. Set up wifi here.

Summary:

1. Click the dialog box in the lower right corner of the computer;

2. Find the mobile hotspot and click to open it;

3. In this way, the computer will turn on the wifi, and the mobile phone can be connected to the wifi to access the Internet;

4. However, the default wifi password of the general system is more complicated, if you want to change the wifi password, just right-click and click to jump to the settings;

5. Click in Settings;

6. After setting the password again, click Save.

Preparation tool: win10 system.

Specific steps: 1. Click the network mark in the lower right corner of the computer, as shown in the figure below

2. Then tap Network & Network Settings. As shown in the figure below:

3. Then tap Mobile Hotspot. As shown in the figure below:

4. Then find the switch of the mobile hotspot on the right side, which is off by default. As shown in the figure below:

5. After turning on the switch, there will be a hotspot network. As shown in the figure below: