Handmade three dimensional birthday greeting card, three dimensional production of birthday greeting

1.Take a piece of paper and draw four straight lines with a ruler and cut them out along the straight lines.

2.Cut a short strip and make a square for him, then fold a small corner and stick it up.

3.Then write Happy Birthday on the paper you just had, draw a cake, and then color it and cut it out.

4.Then find a new piece of paper and stick the square in a place you like, then glue the birthday and cake onto it with glue or double-sided tape.

5.Then make some of your favorite decorations on the greeting card, and the greeting card is done!

You don't need any complicated operation, as long as you have a blank piece of paper, you can make a holy and pure church stand in front of you; Let the beautiful and lively fish jump in front of you; Let the bouquets of charming and elegant flowers bloom in front of you. It all seems so complicated, but in fact, all you need is a utility knife, a steel ruler (ah—it doesn't matter), a small awl (of course, it doesn't need to be so professional, there is a pin instead), and then you carve it out according to the pattern, fold it, and finally write a few words of your heartfelt blessing in the blank space and send it to your friends. I believe that no matter who receives such a three-dimensional greeting card, they will be surprised by its uniqueness and moved by its exquisite and chic.

1.Carve out the solid lines in the printed greeting card with a utility knife.

2.Position the ends of the long dotted line in the diagram with an awl.

3.On the patterned side, mark the dotted line that has not been placed with an awl with an awl.

4.Turn the card over and mark the dotted line with an awl (the point of the cone crossing: grasp one-third of the thickness of the paper).

5.Fold the carved pattern according to the direction of the broken line, and adjust the small part with tweezers.

6.After folding the pattern into shape, fold the entire greeting card neatly.

7.Open it at 90 degrees (or 180 degrees) to confirm the overall shape.

8.Carefully combine the side line and the center line and fix it with glue.

I've done this stuff, first draw the letters on the checkered paper, then cut them out, trace them on the white paper, cut off the excess parts, fold them up, and then paste them on the cardboard, and that's it.

Three-dimensional birthday cards? I know there's an electronic version of it, it's dynamic, isn't it three-dimensional? You can take a look at it.

1. Take a piece of blue A4 cardboard and fold it in half along the middle line to make a greeting card, and then take out four sections of the same width but different lengths of the shed, and fold the two sides of each section of the strip 1cm left and right.

2. Glue the four strips from bottom to top in the middle of the greeting card in order from largest to smallest, so as to make a three-dimensional cake shape. Take a piece of pink A4 cardboard and cut out a part of it for later use, fold the paper in half to draw a peach heart and cut it out, and then fold the remaining paper in half to cut out two identical peach hearts.

3. Glue the three peach hearts together, and then stick the glued peach hearts on top of the cake. Take a piece of white cardboard and cut out three strips of the same size, and then take a piece of yellow paper and cut out the shape of three flames.

4. Then cut three circles with red paper, first glue the flame to the circle, and then glue the white strip to make a candle, and stick the three candles on the three layers below the cake.

Wow, this one is better on its own, and I will push it on a big push.

What you need to prepare: red cardboard, white cardboard, carving knife, glue stick, template, ruler, compass.

The stencil is A4 size, and the printed stencil has a border on it, and glue the back of the outside of the frame and stick it to the white cardboard.

Take out a graver and a ruler and cut the solid vertical lines.

Then take out the compass and use the sharp head to draw all the horizontal solid lines so that it can be folded later.

Gently push and fold, starting from the bottom, so that the cake pops.

If it's to be given to a loved one, just a cake is certainly not enough, make another rose.

Draw roses by hand or with a stencil and then hollow out.

You can also make a few hydrogen balloons on both sides of the cake, and candles on the top of the cake are also indispensable. Then attach the white cardboard to the red cardboard, which should be slightly larger.

Finally, draw a few leaves next to the roses, write birthday greetings, and a perfect three-dimensional birthday card is ready!

When celebrating your birthday, if you want to make a three-dimensional greeting card, then you can first buy an ordinary greeting card, and then find some colored paper to cut it into a specific shape and stick it into your greeting card in a three-dimensional form.

There are particularly detailed production tutorials on Douyin or Kuaishou, and it is recommended to choose one you like to do.

Greeting cards are a kind of cards used to greet each other, and it is also very common to give greeting cards during holidays or birthdays. The following is the content about the steps to make a birthday card as follows:

1. Fold and cut the greeting card paper in half. First prepare two pieces of greeting card paper, then fold the two greeting cards in half, then take out one of them, and start cutting from the side that is folded in half in the middle, and use scissors to cut out small openings one by one, but be careful not to cut the greeting card. Then fold the Hekara in half, and there will be the same situation as the picture below, with a cut in the middle of the card.

2. Fold into a three-dimensional body. After completing the previous step, we pull open the freshly cut greeting card paper and fold the freshly cut notch of the greeting card paper into the shape of a three-dimensional body in a way that goes up and down a few times. Then we opened the greeting card, folded the cut part, and we folded it into a three-dimensional greeting card.

3. Make colorful balloons. After making the three-dimensional greeting card, we use the prepared colored paper, first cut the colored paper into circles, and then use a glue stick to dip the cut round colored paper one by one, and make balloons with colored paper. Once we have the confetti balloons and pop-up cards ready, we can move on to the next step.

4. Paste balloons. Glue the freshly made colored paper balloon to the three-dimensional greeting card, stick the balloon to the three-dimensional folding position, and then glue another greeting card paper prepared earlier on the outside of the made three-dimensional greeting card.

5. Done. This makes for a beautiful pop-up greeting card. It's a beautiful balloon, and the strips of paper with different cutting lengths can form a front and back effect, so bring the children to learn three-dimensional greeting cards.

The three-dimensional birthday card method is as follows:

The production of a three-dimensional greeting card does not require a lot of language and words, but in terms of preparing materials, it must not be ambiguous, here it is recommended to use a lighter color of paper, do not choose red or white.

You can choose sky blue like in **, and of course you can make it according to the color that the teacher likes. In addition, you need to prepare an A4 paper, colorful pens and various small stickers.

Half of the prepared A4 paper is enough, it is best to fold it into 15 15cm, and then use a colorful pen to paint rainbows on the two short sides of the paper, pay attention to the use of red, orange, yellow, green, cyan, blue, purple this color order, so that the teacher can also see your intentions.

After applying the color, fold the paper in half four times starting from the middle, then open it and arrange it into a fan shape, and use double-sided tape to cover the left and right sides of the fan shape, standing in the middle crease of the greeting card.

If you use the color of the sky, you can paste some small elements like white clouds and the sun, and you can do it by painting before grinding these teases, and if you feel that you are not very good at drawing, you can prepare some small stickers.

Make your greeting card look more elemental, and then write a blessing language for each teacher under the rainbow you make, for example, write Happy Teacher's Day for English teachers.