After my computer keyboard was damaged in water, how much did it cost to repair it

Don't go for repairs. After turning off the computer, pry off the keycaps, carefully wipe the liquid in the keyboard, and find that the keyboard is still not working properly, it should be that the circuit board of the keyboard has been flooded.

I opened the base of the keyboard. It is recommended to be careful with this step, because many keyboards are designed with "hidden buckles" and are easy to break.

If you accidentally break it, the keyboard will never be as tight as it used to be.

I accidentally broke the "hidden button" of my keyboard before, so be careful!

My friend used Logitech's easy-to-use version, but fortunately there was no hidden buckle, and when I opened the keyboard base carefully, I saw the circuit board of the keyboard. Carefully wipe with absorbent cotton that absorbs water.

Reminder, the circuit board of the keyboard is a thin plastic sheet with two to three layers, and you must wipe it carefully, let alone touch it with something hard, otherwise it will damage the circuit.

After wiping it carefully, reattach the keyboard.

If the problem persists! It should be that the circuit board is still wet, and the short circuit causes the keyboard to not work properly, and there is no way to disassemble the keyboard again. Wipe the three layers of the circuit board separately and dry them in sunlight after wiping.

Conclusion It's not a big deal, but it's important to pay attention to water and moisture resistance. Whether it's a keyboard and mouse, or a monitor host, you should pay attention. For the keyboard within the warranty period, I personally do not recommend such repair, it is best to send the keyboard to the repair department.

Of course, there are many waterproof keyboards on the market, it is recommended that if you are "hairy" or send it to a professional repair shop, if you accidentally get into the water, you must carefully disassemble it, dry it before installing and using.

It depends, and you don't necessarily have to buy a new one. If it were me, I would take it apart, because if I couldn't fix it, I would replace it, and if I couldn't use it in the end, I would have to replace it, so I would try to repair it, and maybe it would be able to use it. It's a circuit board inside, and if you get water, you should dry it with a cold air first, and then I know that there is a chemical that is used to increase the electrical performance of the circuit board.

It can be used for circuit board cleaning and maintenance. You check.

Ignore him for a while, and then try it and maybe it can be used again, and there is no need to repair it, just buy a new one It's not expensive.

How much does that keyboard cost yours? If you can repair it better than you bought it, why don't you buy a new one? As for how much it really costs, why don't you try to dry the water in it first and see if you can solve it! If you can't, you can only repair it, and I don't think it's too expensive

Hehe. Not worth repairing.

Spend 50 yuan to buy a double swallow keyboard that is also waterproof.

Water ingress into the computer keyboard is a relatively common problem, which can be caused by accidentally spilling liquids such as water cups on the keyboard when we are using the computer. So, what should we do when a computer keyboard gets water?

1.Immediately power off and shut down. If you find that the computer keyboard is flooded, the first thing to do is to immediately turn off the power and shut down to avoid a short circuit in the computer, which can lead to more serious consequences.

2.Remove the keyboard. Remove the computer keyboard and wipe as much water as possible on the keyboard with a towel or paper towel to ensure that there is no residual moisture inside the keyboard to avoid further damage to the keyboard.

3.Use a water absorber. If there is more water on the keyboard, we can use some water absorbers or similar tools to absorb water on the keyboard and remove the water from the keyboard more effectively.

4.Use a hair dryer to dry the mess. Place the removed keyboard in a well-ventilated area, or use a hair dryer to dry the keyboard at a low temperature, taking care to keep an appropriate distance to prevent the keyboard from deforming or melting due to high temperatures.

5.Check if the keyboard is working properly. Once the keyboard is completely dry, reinstall the keyboard and check that the keyboard is working properly.

If there is a key unresponsiveness or a key malfunction, it may be that the keyboard component is damaged or the circuit is short-circuited, and further repair or replacement is required.

In short, when the computer keyboard gets water, we should deal with it calmly and take timely measures to dry the keyboard as soon as possible to avoid more serious damage. If the keyboard is not working properly, we should go to a professional repair point for help.

If you accidentally place water or liquid (drinks, coffee, wine, cola......How should I deal with it when it is dumped on a laptop keyboard or computer system?

1.First, immediately turn off the power to your laptop's system and remove the power cord as well as the battery.

2.Then use a clean cloth or tissue paper to wipe the liquid off the surface of the laptop keyboard and the machine.

3.Move the laptop near the sink and tilt the laptop 90 degrees to pour out any liquid remaining inside the computer system and keyboard.

4.Use a clean cloth or tissue paper to wipe the liquid on the keyboard and the surface of the machine again.

5.Leave the laptop to dry for 24 hours to allow the liquid inside to dry, and do not use a hot air dryer to dry the case to avoid overheating and deforming.

6.Reconnect the power of the laptop and try to turn it on, if it can turn on normally, please back up the important data in the computer first.

7.Regardless of whether the laptop can be used normally or not, it is recommended to contact the official after-sales service of the corresponding brand immediately after the test and arrange for testing and repair, so as to avoid sudden failure caused by oxidation and rust.