The computer s keyboard restarts with a touch, and the computer restarts the keyboard repeatedly

Updated on number 2024-02-09
14 answers
  1. Anonymous users2024-02-05

    If you come across something like power, you can go to Desktop-Right-Click-Properties-Screen-Saver-Power-Advanced to change it, and take a look.

    Or, your keyboard is powered on, huh.

  2. Anonymous users2024-02-04

    It's your computer system that is set to restart with any key, and you can go to the control panel to set it back.

  3. Anonymous users2024-02-03

    (1) Press the delete key when the computer is turned on, which is a shortcut key to enter the BIOS, and it is to enter the setting interface of the BIOS, not a one-click reset key.

    2) The shortcut keys for one-click restore of commonly used brand machines are as follows:

    1.Lenovo computer: In the state of shutdown, press the "novo" key on the keyboard, there is a button like a curved arrow, you can restore it with one click.

    2.HP notebook: There will be a prompt of ESC information in the lower left corner when the computer is turned on, at this time, press the ESC key to open the menu, and press F11 to enter the system recovery program.

    3.Dell notebook: Before booting into the system, press the F8 key to enter the advanced boot options, and select [Repair Computer].

    If you don't have a password, just [OK]. Once you're in System Recovery Options, select Dell DataSafe Restore & Emergency Backup.

    4.ASUS Notebook: Press the key when the ASUS logo appears when the machine starts. Then follow the prompts, and you can restore it in one click.

    5.Shenzhou Notebook: When the interface of Hasee Shenzhou (or Shenzhou computer) appears, start pressing the F9 key continuously until the screen appears a recovery window. , and then click Select image file to restore.

    6.Sony Laptop: Press the "Assist" button on the keyboard when powered on, and then press the prompt to enter Vaio Care mode. You can restore it.

    7.Samsung Notebook: Press the F4 key to enter the Samaung Recovery Solution when the Samsung logo appears on the boot, and you can restore it with one click.

    Note: Use one-click restore: If the hidden partition and backup image are not damaged, and the one-click restore software is not damaged, you can restore it with one click.

  4. Anonymous users2024-02-02

    Hello! In this case, it may be a system failure, it is recommended that you try to reinstall the system first, if the problem persists, then look for hardware problems.

  5. Anonymous users2024-02-01

    It is best to send the computer to the computer city for repairs after repeated restarts.

  6. Anonymous users2024-01-31

    There may be a problem with the system.

  7. Anonymous users2024-01-30

    Analysis reason: Friend, hello, you are installing the security control of the Agricultural Bank of China, your computer has a Trojan, causing your computer to be poisoned, due to the virus has damaged your system, and this Trojan horse is to record the keyboard input, so as soon as you press the keyboard, there will be a restart.

    Solution: Jianyi is in safe mode, full antivirus, which control is uninstalled, it's OK, it's best to reinstall the system, or one-click restore.

  8. Anonymous users2024-01-29

    Absolutely agree with the upstairs, there are two possible causes of poisoning: the controls you installed are toxic inside; If your computer is hacked, someone has hacked it.

    See if you should be a computer rookie, so don't go into safe mode to change, just reinstall the system, if your computer is hacked and your information is exposed in safe mode, then you will be a tragedy.

    If you can't reinstall the system, you can ask me.,I'll teach you.。。

  9. Anonymous users2024-01-28

    1.Software compatibility issues cause a blue screen on your computer. If the driver is incompatible with the hardware of the newly installed system, it may cause the blue screen phenomenon, it is recommended to install the driver in the hardware free CD.

    2.Poor contact of memory modules or memory corruption causes a blue screen on your computer.

    During the operation of the system, almost all high-speed data access operations are carried out in memory, and if the memory module is not in contact or damaged, there will be problems in the access of system data, which can easily lead to a system blue screen and crash. Solution: Clean the dust in the chassis, unplug the memory module, wipe the gold finger with an eraser, and then plug it in again.

    3. Virus Trojans cause a blue screen on the computer. Nowadays, there are more and more types of virus Trojans, and there are various ways of transmission, which are difficult to prevent, and some virus Trojans infect system files, causing system file errors, or causing system resources to be exhausted, and may also cause the occurrence of blue screen phenomenon.

  10. Anonymous users2024-01-27

    Please rule out whether the power button does not fully pop up after being pressed.

    Because your description is caused by pressing the power button, if the power button is not reset normally and keeps it short-circuited, this fault phenomenon will also occur.

  11. Anonymous users2024-01-26

    "There are many reasons for the blue screen restart of the computer, and it is recommended that you follow the following methods to troubleshoot them one by one:

    1.Remove newly installed hardware devices, such as external cameras, printers, and memory including upgrades;

    2.Try to click F8 to enter safe mode during the boot process, uninstall the previously installed software, and check and kill viruses in a comprehensive manner;

    3.In order to fully rule out the possibility of software or system problems, you can back up the hard drive data and reinstall the operating system;

    4.If blue screens continue to occur frequently after reinstalling the system, it is recommended that the machine be sent to a local service center for further testing.

  12. Anonymous users2024-01-25

    Friends, you can try,1. Press "F8" when you boot up, press Enter, Enter, enter "Safe Mode", find: "Last correct setting", press down, try!

    2。Or, find the "Normal Boot" mode in "Safe Mode", press it, and try it!

    3。If it still doesn't work next time you turn it on, I suggest you do: "One-click restore"!

    See this is the "Restore System" method, which will not only help you repair and restore your computer, but will also save all the files on the disk

    After the computer is turned on, (it can only be operated after the computer "brand")!

    Press the "One-Key Ambulance" shortcut on the far right of the keyboard (the "+" sign on the keypad).

    Laptop press: F2 or F11), and then wait for a while to press "Deep One-click Restore Talk Hunger" or "One-click Ghost", wait for the system to "rescue and copy" all disk files, note: Restore is done, do not shut down or restart the computer, you should immediately "enter the main platform", that is.

    desktop", otherwise "all the work is wasted", "the restoration is invalid"!

    Electricity. Friends, you can try,1. Press "F8" when you boot up, press Enter, Enter, enter "Safe Mode", find: "Last correct setting", press down, try!

    2。Or, find the "Normal Boot" mode in "Safe Mode", press it, and try it!

    3。If it still doesn't work next time you turn it on, I suggest you do it: "One-click restore"!

    See this is the "Restore System" method, which will not only help you repair and restore your computer, but will also save all the files on the disk

    After the computer is turned on, (it can only be operated after the computer "brand")!

    Press the "One-Key Ambulance" shortcut on the far right of the keyboard (the "+" sign on the keypad).

    Laptop press: F2 or F11), and then wait and press "Deep One-click Restore" or "One-click Ghost", wait for the system to "rescue and copy" all disk files, note: Restore is good, do not shut down or restart the computer, should immediately "enter the main platform", that is.

    desktop", otherwise "all the work is wasted", "the restoration is invalid"!

    The computer is immediately back to the "factory state"!

    Factory state": It is the state when I first bought it, the software is there, there is no need to "reinstall the system", and it is much more "worry-free" than the heavy installation!

    Or, take out the "manual" when you bought the computer and compare it with "restore the system"!

  13. Anonymous users2024-01-24

    1.Check whether the power on the motherboard has exploded.

    2.There is a problem with the inner hand socks.

    3.Hard drive issues.

    I have also encountered similar problems (several sets of computers are in a hurry), most of them are these 3 phenomena, in fact, they are crashes. Let's try to change the memory first.

  14. Anonymous users2024-01-23

    1.Your business Dell keyboard, if it is then tragic that Dell original accessories are out of order.

    2.If the power supply is overloaded, the power plug-in board used by the computer host can be used at the same time as other electrical appliances with a large negative charge.

Related questions
9 answers2024-02-09

The advantage of the brand is that the after-sales service is good, and there is no problem with it. >>>More

27 answers2024-02-09

First look at whether the network card light is normally lit up, and see if it works together! If there is no problem with the settings and spelling, it means that there is something wrong with your computer.

14 answers2024-02-09

On the premise of ensuring that your driver is correct, check whether there is a setup file in the driver. If you have it, install it directly, and if you don't, install it manually in Device Manager.

7 answers2024-02-09

In your case, the computer should be running slowly, there are a lot of duplicate processes, and there are 2 unknown processes.

9 answers2024-02-09

Please describe the problem in more detail so that we can better solve the problem for you (if not, please describe it again). >>>More