What is the reason why Xiaomi phone shows handset mode for no reason?

There are several reasons for this:

First, it may be that the earpiece is flooded.

Solution: Use a hair dryer to blow for more than half an hour. 2. Buried in a rice tank for about three days.

2. Water ingress or poor contact with the headphone jack.

Workaround: Same as above. 2. Ibid. 3. Plug and unplug the earphones a few more times.

3. It may be due to third-party software.

Solution: Enter the safe mode to exclude third-party software to see,After shutting down, when the meter appears, quickly press and hold the volume button,To exit and restart it,If the system is replaced, it has no effect, then go to the after-sales inspection。

Quit. 1. You can click on hands-free during the call.

2. WeChat to cancel the handset mode steps: first open the "WeChat" app on the phone, enter the "Settings" interface, and then click to enter the "General", and then we are in the "General" interface, we check on, save it, so as to cancel the handset mode.

3. The word hands-free is mainly used in calls, and the effect is that you can hear the other party's voice without holding ** in your hand, which is quite amplified by the voice. It is mainly used in landlines, mobile phones, headphones, speakers, etc.

4. The landline hands-free headset can be connected with any landline, eliminating the hardship of holding the handset for a long time and leaning over to shout and listen to the speech with the hands-free, and freeing your hands.

Steps for handset mode:

Maybe the headphone jack is in water or the contact is poor, take the headphone jack and plug it a few more times.

Or enter "**" on the dial interface to enter the hardware test and see if the headset mode is normal.

Xiaomi phone switch to earpiece mode:

4.There is also a way to automatically switch to earpiece mode even if it is not set to earpiece mode, as long as you stick the phone to your ear.

Note: "earpiece" refers to the head part, and we usually use the earpiece when we play **. "Speaker" refers to an external one, such as a speaker used to play a song.

Summary. Dear, 1. First open the phone settings, and then click on the "General" item to enter.

2. Then click "Accessibility", and then click "Audio Call".

3. Secondly, click "Speaker" to cancel the headphone mode of the mobile phone.

4. If the mobile phone still does not launch the earphone mode after unplugging the earphones, it is likely that the micro-switch of the earphones on the mobile phone is invalid, resulting in the mobile phone not being able to correctly identify that the earphones have been pulled out, resulting in a small or no sound on the mobile phone. The corresponding solution is to suggest that the user repeatedly plug in and then unplug the earphones to try to see if they can recover, and after the recovery, it is recommended to clean the earphone jack again.

Xiaomi turns off the handset mode in **Settings.

Dear, 1. First open the phone settings, and then click on the "General" item to enter. 2. Then click "Accessibility", and then click "Audio Call". 3. Secondly, click "Speaker" to cancel the headphone mode of the mobile phone.

4. If the mobile phone still does not launch the earphone mode after unplugging the earphones, it is likely that the micro-switch of the earphones on the mobile phone is invalid, resulting in the mobile phone not being able to correctly identify that the earphones have been pulled out, resulting in a small or no sound on the mobile phone. The corresponding solution is to suggest that the user repeatedly plug in and then unplug the earphones to try to see if they can recover, and after the recovery, it is recommended to clean the earphone jack again.

I hope it can help you, dear and I wish you a happy life<>

Xiaomi mobile phones frequently appear in the area of do not block the earpieceWhat's going on, let's take a look at what happened to Xiaomi's don't block the ridge of the earpiece area.

The reason why Xiaomi phones frequently appear in the do not block the earpiece area is because the mobile phone is set to an anti-mistouch mode.

1. First, go back to the desktop and open the settings.

2. Then select Lock Screen, Password, and Fingerprint.

3. Then select the lock screen advanced settings.

4. Finally, turn off the activation button of the anti-mistouch mode.

The above is the content of the Xiaomi mobile phone do not cover the earpiece area, I hope it will be helpful to you.

Summary. The Xiaomi phone speaker turns into earpiece mode.

Hello, it's an honor for me to answer your questions, it will take a little time to sort out the answers, please be patient

Hello, glad to answer for you. Mi phone speaker into earpiece mode method:

2.From the 'Me' page, click on the 'Settings' option in the bottom right corner.

3.After opening the settings, tap on the "Chat" option.

The earpiece mode and speaker mode are corresponding. The earpiece mode is to use the earpiece above the mobile phone to listen to the sound, and the answer is the most commonly used, and the sound is relatively small. The earphone is a pair of conversion units, which accept the telecommunication signal sent by the **** device or receiver, and use the speaker close to the ear to convert it into sound waves that can be heard by the beam.

If my answer is helpful to you, please also give a thumbs up (comment in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a happy mood to return to the world and <> quickly

Find the voice message sent by your WeChat friend, press and hold the voice message with your finger, and the function menu will appear. Since Zhengyou software uses speakers by default, you will see the option of "switch to earpiece**", click to switch to earpiece mode and shout Acacia. 3.

Then you can see the message "Currently in earpiece** mode" displayed on the screen, and you can also see an "ear" sign to the right of your WeChat friend. Since it is an earpiece mode, you need to hold the phone close to your ear to hear it. 4.

There is also a way to automatically switch to earpiece mode even if it is not set to earpiece mode as long as you put the phone in your ear.

The specific operation method of Xiaomi to disarm the handset mode is as follows:1. Open the phone's settings. 2. Select "App Settings".

3. Click "System App Settings". 4. Dianling Cha hit the "tape recorder". 5. Turn off the combustion switch behind the "handset mode" to remove the earpiece mold of the tape recorder.

1. Open your phone's settings.

2. Click "App Settings".

3. Click "System App Settings".

4. Click "Audio Recorder".

5. Turn off the switch behind the "Handset Mode" to disable the handset mode of the recorder.

Operating environmentBrand model: xiaomi11System Version: