How to use the Xiaomi signal booster, how to use the mobile phone signal booster

Here's how to use a signal booster:1.Plug the purchased wifi signal booster into an outlet and let it power on.

2.Connect your phone to the wifi without a password that is sent out separately by the signal booster.

3.Find the domain name of the admin page at the bottom of the signal booster and log in. Both accounts and passwords are available.

The signal booster will automatically scan the surrounding wifi, find and click the wifi you want to boost the signal, and then enter the wifi password.

5. WiFi signal booster, also known as: wifi signal amplifier, wireless signal booster, wireless signal amplifier, wireless extender, etc. When the wifi signal amplifier produced by different manufacturers is used to amplify the wifi signal, the specific settings may be different.

The first step is to check that the accessories are complete.

Signal booster accessories are generally composed of a host, a power adapter, an indoor antenna, an outdoor antenna, and an outdoor antenna feeder.

The second step is to connect the feeder to the outside.

Since the outdoor antenna of the signal booster must be separated from the host, there is a wire between the outdoor antenna and the host. This connection can be directed outside through the air conditioner's drain or window, as shown in the diagram.

The third step is to install an outdoor antenna.

The outdoor antenna should be located in a place with a relatively good signal. If the second step is through the drain of the air conditioner, the suction cup antenna can be placed on the outside unit of the air conditioner. Be careful not to drop or be blocked by surrounding shielding objects.

The fourth step is to plug in the outdoor signal cable.

In this step, you only need to connect the other end of the feeder of the outdoor antenna to the outdoor outdoor of the signal booster host.

Generally, the interfaces of the main engine of the old aluminum shell are located on both sides of the machine, and the interfaces of new enhancers such as Bee Xintong and other brands are located on the rear side.

After insertion, tighten the fixing nut of the interface.

It should be noted that there are generally two antenna sockets in the back, one is an outdoor antenna, and the other is an indoor antenna, so don't get confused.

The fifth step is to place the host.

Just put the console in a stable place, and you can also put it in a similar place as a router.

It should be noted that the host needs to be as principled as possible with an outdoor antenna to prevent self-oscillation.

The sixth step is to connect the indoor antenna of the intensifier to the indoor antenna of the main unit, and tighten the interface nut as in the fourth step.

The seventh step is to plug in the power cord.

One end of the power adapter is connected to the main unit, and the other end is plugged into a 220V power supply.

Now that you're done, why don't you enjoy a smooth call and tell your friends!

Precautions. The indoor antenna and outdoor antenna of the signal booster cannot be plugged in backwards, otherwise the effect will not be produced.

The host should be at least 5 meters away from the outdoor antenna to prevent the self-excited signal from being received by the antenna.

Choose a big brand of green enhancer, outdoor antenna try to avoid the use of Yagi antenna, reduce radiation, ensure quality.

If you want to use a mobile phone signal booster, you must make the signal in the mobile phone usually connected to a computer and can be used.

I don't know what kind of signal booster you're talking about, the kind installed at home, basically put the signal amplifier in the room where the ** is connected, and then there is a signal receiver pasted near the window.

There are several accessories for mobile phone signal amplifiers, including outdoor antennas, indoor antennas, and signal amplifier hosts, which can enhance the indoor mobile phone signal after installation.

The connection of the Xiaomi Signal Booster needs to go through the following steps:1Plug the Mi Signal Booster into a power source and wait for it to boot up.

Once the boot is complete, the indicator of the Xiaomi Signal Booster will turn blue, indicating that it is ready to use. 2.Connect your phone or other device to the Mi Signal Booster.

First open your phone's Wi-Fi settings, search for a Wi-Fi signal that can be connected, find and select the Wi-Fi signal name of the Mi Signal Booster, and then enter the Wi-Fi password of the Mi Signal Booster (the initial password is"miwifi888"）。After the connection is successful, the indicator light of the Mi Signal Booster will turn yellow, indicating that the phone or other device has been successfully connected to the Wi-Fi signal of the Mi Signal Booster. 3.

Open the browser of your phone or other device to access the management interface of the Mi Signal Booster. Enter in your browser's address bar"", and enter the management password of the Mi Signal Booster (the initial password is"admin"), and then click"Sign in"button to enter the management interface of the Mi Signal Booster. 4.

In the management interface of the Xiaomi Signal Booster, some configurations and settings can be made. For example, you can set the Wi-Fi name and password of the Mi Signal Booster, or connect the Mi Signal Booster to an existing Wi-Fi network. 5.

Finally, test the signal enhancement effect of the Xiaomi Signal Booster. Before connecting the Mi Signal Amplifier, if the Wi-Fi signal in some areas of the home is weak.

The details of the Xiaomi mobile phone signal boost settings are as follows:

1. First, enter * * in the dialing interface of your mobile phone, and then a test interface will pop up.

2. Select the mobile phone information, you will see a series of information such as the international identification code, but this is not the point, pull down the page to find the preferred network type, if the mobile phone is telecom 3G, it is CDMAAUTO (PRL).

3. Click the drop-down menu on the right and you will find that there is a very mode to choose from, if the current mode signal is not good to be bright, try to change the mode, and the signal hidden calendar will be improved to a certain extent.

4. If the signal is still the same after the mode is changed, it can only mean that it is a problem with your mobile phone or the operator, and you can go to Xiaomi after-sales for consultation.

Open Settings, select Mobile Network, select Network Type Selection, and select Use 2G network only.

Reasons for poor cell phone signal:

1. The mobile phone is in the signal blind zone. Especially in the process of playing **, when one of the two sides of the communication is in the signal blind zone, the mobile phone will automatically hang up due to no signal.

2. The phone is low on battery. Some mobile phones will not be able to receive electromagnetic waves normally due to insufficient battery, resulting in the interruption of the mobile phone signal. Therefore, once you find that your phone is running low on power, you should charge your phone's battery in time.

4. The interruption of the mobile phone signal due to large electromagnetic interference. When the mobile phone is in a strong magnetic field, at this time, the signal of the mobile phone is greatly disturbed, and the mobile phone signal is interrupted in serious cases. The solution is to try to stay away from the location of the strong magnetic field, and then use the mobile phone to call**.

5. Human factors cause mobile phone calls to be interrupted. During a call, the other party accidentally presses the "stop call" button and the call is aborted.