Phisson K2 router, the computer is connected to wifi The network speed is very slow, and the network

It's the router itself, changing routes.

There are many reasons why K2 Wi-Fi is slow.

1.Someone rubs the network, you enter it in the browser bar and then open the default username and password are admin, click confirm to open the wireless routing confirmation interface, and then wireless settings - host status, here you can see the number of hosts connected to the wireless, if you find an abnormal host, then you are rubbing the network, it is recommended that you enter the wireless security settings there to modify the wireless password.

2.During peak usage periods, carriers generally use shared bandwidth technology, and when the number of users increases at night, everyone will naturally be slow to grab the network speed together.

3.Artificially limiting your internet speed, many wireless management software can do it.

5.Hardware issues with the router itself.

6.The signal is too poor and too far away from the router.

Solution:1You may have turned on the wireless router and the cat for too long, causing the speed to drop, you can turn off the power of the wireless router and the cat as said on the 2nd floor, and wait for a while before turning it on, and the speed should be restored.

2.was rubbed on the net and changed the password.

4.Find a place with a good signal.

5.Check the router for hardware damage and common sense reset.

Setting a route cannot increase the network speed, and it can only be said that incorrect settings will affect the network speed.

1. The bus of the broadband network is connected to the WAN port of the router, and the LAN port of the router is connected to the computer.

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the account and password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

1. If the router is used for a long time, it will lead to the aging of the internal lines of the router, and the heat dissipation will not be timely enough, so the network speed of the router will also be slow. At this time, we need to restart the router and let the router clean up these caches during the reboot process.

2. If there are glass, metal and other items around the router, it will hinder the signal transmission of wifi. Have you noticed that the network speed has not changed much in the place closest to the router, or it is still slow. At this time, we need to pay attention to whether the antennas on the router are placed in the same direction, and we can try to place them at different angles.

3. If it still can't be solved, we have to consult the operator. Ask them if the broadband service is normal, if something has changed, or if there is a change in the router, or try to change the router to see if it is a problem with the router itself.

Cause.

First, the issue of broadband.

Solution: We can not use Feixun K2 router, and then connect the network cable from the external network cable or cat (fiber optic cat or **cat) directly to the computer, and then dial up the Internet to try, if the dial-up is not successful, please call the broadband service provider to solve.

Cause. 2. Wrong Internet access method.

Setting up a route does not increase the network speed, but incorrect router settings will affect the network speed. Here's how to set up your router correctly:

1. The bus of the broadband network is connected to the WAN port of the router, and the port of the router is connected to the computer;

2. After starting the device, open the browser and enter the wireless router settings interface;

3. An account and password to log in to the router appear in the settings interface, enter the default account and password, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. According to the settings of the setting wizard, select the Internet mode;

7. Enter the account loss elimination number and password applied for from the mining network service provider, and go directly to the next step after the input is completed;

8. Set up a wireless password to judge the air;

9. Restart the router after entering it correctly, and then you can surf the Internet normally.