192 168 0 1 How to set up the router

How to set a router password?

Here's how to set up your router:

Prepare to take slip material: Honor 11 browser.

Tengda Gigabit Wireless Router.

1. Open the browser, enter the address of the browser, <>2, and then enter the original password according to the prompts on the page to log in to the router.

3. After entering the home page of the router, enter your own network cable, network cable password, and wireless password for Yu Yuwei, enter a password, and then click OK below.

4. Then click on Advanced Settings on the right side of the browser.

5. In Advanced Settings, tap to enter Wireless Settings.

6. In the wireless settings, set a name for the wifi Liang Min roll, so that it is easy to find, after the setting is completed, click the OK button.

Router Setup Process:

1. After opening the router to set the address, enter the username and password to log in.

2. Click "Settings Guide" in the router navigation.

3. Then click Next, and then you will select the desired Internet access method.

4. Then enter the broadband username and password given to you by the operator. Once you've entered, click Next.

5. After the password is successfully verified, the important part comes, set the wifi name and password. The SSID is the WiFi name, and the PSK password is the WiFi password. Once you're done, click Next.

6. Then click Done, the router will restart, and the router will be set up after restarting.

Step-by-step method of the router setup interface:

Enter the router, you need to set it up before using it, here is to share the method and steps with you. Once the settings are successful, you can log in. Please see below for detailed steps, please follow the steps to set up carefully.

If something goes wrong, you can also check the manuals of your router.

Router settings.

Step 1: The computer is not directly connected to the original network cable, but through another network cable.

and passwords. Step 3: The username and password are admin by defaultIf it is broadband Internet access, select "ADSL Virtual Dialing", and fill in the corresponding username and password.

Step 4: Select "Wireless Parameters" - Basic Settings to set as follows.

Step 5: Setting the wireless password, remember to fill in the password, and remember the password, and you can access the Internet wirelessly in the future.

<> landing.

Method 1: If the user is through the IE browser to enter**login to the router,Then it may be related to whether IE is set**, if IE is set**, there will be the above failures, all first of all, we cancel**settings. Click on "Tools - Internet Options - Connections - LAN Settings" as shown in the image

Method 2: After canceling **, check whether the computer is connected to the LA interface (generally there are 4 interfaces, and one of the 4 interfaces) is connected to the Sun Shaoji number.

Then see if the router is working properly and if the indicator light is on.

Method 3: Of course, some users are through modems.

Dial-up Internet access. If this is the case, remove the dial-up connection from the broadband first. Select "Never make a dial-up connection" to follow the steps:

Click "Tools-Internet Options" on the toolbar of IE browser, switch to the "Connect" button, and you can operate as shown in the following figure:

If the IP address is not in the same network segment, you can manually configure an IP address. If you don't know how to set it, set it to "Automatically acquire IP addresses". Find "Local Connection" in turn, right-click and select "Properties", and then double-click "Internet Protocol version to set."

As shown in the figure: >Method 5: After passing the above operations, enter the router settings**. Now try to enter on the address bar of Internet Explorer to enter the settings screen of the router. If you still can't log in, you can reset the router and restore the initial state.

Method 6: Finally, if you change the management port of the router, you should enter http: LAN port IP: port number when logging in.

Step 1, take Xiaomi Mi 8 as an example, first connect Tengda's router wifi in the mobile phone brother model as an example.

Step 2: Open the browser, enter the dust at **, and click refresh.

Step 3: After that, click Continue to visit the web version of Thrill Town.

Step 4: Enter the administrator password and click OK.

Step 5: Select the network status, modify the wifi name and password, and click Save.

The first step, take Xiaomi Mi 8 as an example, connect to Tengda wireless router wifi.

Step 2: Open the browser, enter the chain, and click Refresh. Summoning the Forest.

Step 3: Click Continue to visit the web version.

Step 4: Enter the administrator password and click OK.

Step 5: Select the network status, modify the Wi-Fi name and password, and click Save.

How to use the setting of the road hidden hunger beam by the instrument dense stove to transport the limb royal code.

First, open the browser of your computer and enter " in the address bar to confirm.

2. Then, enter the password of the routing gripper in the web window and log in to the settings interface.

3. After the end of the model, click "Advanced Settings" on the router settings interface and click to open.

Fourth, finally, you can see the "router settings interface" in the webpage, the problem is solved.