My router is Feixun K2, so how can I use the shared WiFi function?

Below is a screenshot of my use.

Click in and we can see various parameters,Click on each parameter to modify the settings,The network name can also be modified,The previous version can not be modified,But now you can only modify the back part,The official name logo in front cannot be modified。

**There are three in total**, which can be modified to set the ** of three **and the duration of Internet access.

You can also control the user's bandwidth by setting a rate limit.

If the user is willing to pay for the Internet, he only needs to click on the red envelope to reward the Internet and continue, and then he will be prompted to choose to go online**.

First of all, you need to install the Feixun router app, click "Share WiFi."", enter the shared wifi details page, select turn on and off, it's very simple. You don't have to worry about security, and you can earn some internet fees, which is still very good.

<>1, Feixun. The default password for the router is admin.

2. Solution: Find an empty or button marked reset on the back of the front pants of Chi Zheng Feixun Road. When the router is powered on, press and hold the red circled button with your hand, and wait for all the lights to go out before releasing it.

At this time, this Feixun router cleared the password and restored the factory settings.

Then connect your computer to the LAN of your router and enter the gateway address of your router in your browser. Then enter the account admin, and the default password admin, you can enter the management interface of the road code repentance device. Change the administrator password in the router and enter a new password.

The operation of Feixun K2 is as follows:

1.First of all, open the browser on your device and enter the IP address of the router (usually press the enter key to enter the router management page.

2.Enter your username and password to log in, which you can view on your router if you haven't changed your router's default login information.

3.After entering the management page, Fengkong finds the "Wi-Fi Settings" or "WiFi Settings" menu.

4.On the WiFi Settings page, find Security Settings (which may also be known as Wi-Fi password settings).

5.Under this tab, you can see the current Wi-Fi password and you can also change the password.

6.Enter your new wifi password and save your settings.

7.After you change your password, make sure your phone, tablet, and other devices are connected to Wi-Fi and use the new password to connect.

Yes, you just need to set it up and plug it in directly.

Feixun is out of business, the router can still be used,After you connect the router, enter the login router Internet access method and choose to get it automatically,Then you can use the wireless network settings。

Wireless routers need to be set up according to the Internet environment before they can be used.

Different Internet environments have different ways to set up wireless routers.

If it is a fiber modem wireless router that requires dial-up, set it up as follows:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router;

2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet account and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

FeixunK2 router,Mirror polishing process,High-end atmosphere,FunctionVPN、Firewall、Wireless bridging、Bandwidth control、MAC address cloning and other functions are not bad。 Next, I will share with you the networking methods and functions of Feixun K2 routers.

Feixun K2 router.

First of all, we need to connect the Feixun K2 router. Feixun K2 wireless router has 5 network cable interfaces on it. (as shown in the figure below).

The blue interface is one WAN interface, and the four yellow interfaces are LAN1, LAN2, LAN3, and LAN4, for a total of four LAN interfaces.

The blue WAN interface connects to the cat, that is, the broadband network cable; The computer can be connected to any of the interfaces in lan1, lan2, lan3, and lan4 with network cables, so it is enough to say that four interfaces are used to connect network cables.

Before we set up the Feixun K2 router to surf the Internet, we need to set the IP address in the local connection (Ethernet) of the computer to "automatically obtain the IP address" and "automatically obtain the DNS server address".

After entering the page, we can see that the page shows the 3 options of "Internet access mode" in the Feixun K2 router.

They are "broadband account, automatic acquisition, and static address", and then we can choose one of them.

Click on "Broadband" and fill in the appropriate information. (Figure 1). Click on "Auto Get" and fill in the appropriate information. (Figure 2). Click on "Static Address" and fill in the appropriate information. (Figure 3).

After filling in the corresponding information, click "Finish", then the Feixun K2 router will be successfully connected to the Internet.

We can turn on the wifi, look for the wireless network named @phicomm D8, enter the password and connect.

First of all, let's turn on the WLAN function on the mobile phone to search for and connect to the wireless signal of the Feixun K2 router. FeixunK2The wireless signal name defaults to:@phicomm XX,No need to enter wifi password,Direct connection is OK。

Log in to the settings page and enter the default password: admin to log in.

Re-set a "administrator password" for Feixun K2,The administrator password here refers to the login password。

Log in to the Feixun K2 router, we can also use the functions of "one-click physical examination", "signal conditioning", "Internet guidance" and so on. It can be seen that Feixun K2 router is very comprehensive.

There are two detected Internet access methods, namely broadband dial-up Internet access and DHCP automatic acquisition of IP addresses.

Select one of them and click to enter to fill in the basic information, and click "Next" after filling in.

In this way, we can set up wireless wifi on our mobile phone, including customizing the settings "Wi-Fi name", "Wi-Fi password" - click "Done".

A friend sent a Feixun K2 router, can I use it, if it can be used, how to set it up. Need me do what to do, thanks.

Wireless routers need to be set up according to the Internet environment before they can be used. Different Internet environments have different ways to set up wireless routers. If it is a fiber modem wireless router that requires dial-up, set it up as follows:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router; 2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page; 3. Set up according to the PPPoE (ADSL virtual dialing) travel mode, and enter the online account split number and password; 4. Set the SSID, encryption method and password; 5. Save and restart; 6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.