Does anyone know some specific details of the simple greenhouse?

Buy a book and read it.

How to build a simple greenhouse:

The first pre-construction preparation: 100 meters of tape measure, construction line, white ash, punching machine, (9 filaments po film, skeleton, circlip card slot, insect net, film winder and other greenhouse materials are provided by professional manufacturers - you can consult me).

Second, determine the orientation and specifications of the simple greenhouse, the length of the north and south is less than 80 meters, and the width of the east and west is 8 meters. The plot should be convenient for irrigation, free of pollution, flash floods, mudslides, hail, and lightning strikes.

The third pay-off: 1 meter a spacing, release the position of the arch pipe, with a punch machine to dig 40 cm.

The fourth installs the arch pipe, the fifth installs the horizontal pull and the circlip card slot, the sixth installs the insect net, the seventh film and the film winder, and the eighth makes the shed head and door.

How to build a simple greenhouse:

1. Shed direction. It is better to use the north-south direction, if it is limited by the field, the east-west direction can also be used, and try to avoid building a shed in an oblique direction.

2. Specifications. The shed is 4-6 meters wide and 30-50 meters long, and the simple vegetable greenhouse is built with a height of meters. When establishing a greenhouse group, the spacing between the sheds should reach meters, and the distance between the sheds should be 4-5 meters, which is conducive to transportation and ventilation and avoid shading.

3. Lofting. In the place where the terrain is open and not the tuyere, determine the four corners of the greenhouse according to the length and width of the designed greenhouse, use the Pythagorean law to make the four corners at right angles and then lay the positioning pile, pull the positioning line between the positioning piles, and flatten and tamp the foundation of the bamboo frame along the line.

Greenhouse is designed to allow vegetables, flowers, melons and fruits to be not affected by the season, and can appear in front of the public all year round, it is mainly through the use of closed space insulation performance of vegetables and flowers to adjust the growth period, so that they can grow under controllable temperature conditions, and can achieve a certain yield. Due to the relatively small number of off-season vegetables and fruits, relatively speaking, the highest is higher, farmers are using this to plant a large number of greenhouses, which not only meets the market demand, but also can achieve the purpose of making money.

It is good to weld and build, and you can also consider the tent of the prefabricated assembly structure, you can learn about it.

1.Choose the right venue. Generally, choose a plot with convenient water sources, convenient transportation, far away from roads and pollution sources, fertile land, and sufficient sunlight to build greenhouses. Which kind of greenhouse to build needs to be adapted to local conditions, according to local climatic conditions, production season, and financial conditions.

2.The width of the greenhouse is generally 8-12 meters, and the length is not limited. The solar greenhouse is east-west, and the arched greenhouse is best in the north-south direction, or it can be in the east-west direction.

3.Prepare bamboo and wood according to the site, or process cement piles, plastic steel, steel pipes and their accessories.

4.For the general arch shed, the arch frame is installed first, and then covered with agricultural film, fixed with a film pressing line or film trough, and the bottom film is pressed with soil.

**5.The solar greenhouse is built in the north with a wall of 3-4 meters, a width of 8 12 meters and a length of 60 100 meters. Install the steel frame structure, cover the back slope with cement board, then cover it with special agricultural film, fix it with a film pressing line, install a roller shutter machine, and spare thermal insulation quilt or straw curtain.

**6.According to the production season, choose to keep the air outlet. The arch shed retains air outlets on both sides of the shed, and the multi-building arch shed retains air outlets on the top and both sides.

Sunlight greenhouse produces vegetables in winter, generally in front of the back slope of the greenhouse to reserve the air outlet, spring and autumn production of vegetables, in the southernmost meter high position reserved air outlet.

When <> build a simple greenhouse, it is necessary to choose a site with flat terrain and sunny ventilation holes, and dig a drainage ditch with a depth of one meter on both sides of the site to avoid water accumulation in the greenhouse, and then use a steel frame to build an arched frame to control the area at 600 square meters of void, and install insect nets on both sides of the greenhouse to facilitate ventilation of the greenhouse.

1. Set up the site.

When building a simple greenhouse, it is necessary to choose a site with open terrain, sunny and dry, convenient transportation, and divide it into an area of 80 meters long and 8 meters wide to build a greenhouse, and dig a drainage ditch around the area before building to avoid water accumulation in the greenhouse and affect the growth of greenhouse plants.

2. Build a structure.

The simple greenhouse mainly includes insect nets, greenhouse skeletons, plastic films, film rollers, film ropes and other parts, among which the insect nets can ventilate the greenhouse and avoid mosquitoes from entering, the plastic film can play the role of heat preservation and moisturizing, the film rope can avoid the plastic film being blown over by the wind, and the film roller can adjust the light for the greenhouse.

3. Construction method.

When building a simple greenhouse, first use a steel frame to build an arched greenhouse skeleton, and reserve an entrance and exit at one end close to the roadside, then cover the top of the greenhouse with plastic film, and fix the plastic film on both sides one meter from the ground, and then install mosquito nets below the fixed position of the plastic film, and finally install the wall cornea.

4. Precautions.

In the process of building a simple greenhouse, the plastic film needs to be installed from the top down, so as not to damage the film, and the film roller must be installed on both sides of the greenhouse to save manpower.

Choose the site: It is best to build a small and simple greenhouse in a place with a leeward and sunny background and flat terrain. Prepare the tool:

Prepare tools such as bamboo poles, lead wire, plastic film, steel rods, scissors, etc. Construction method: Insert a bamboo pole with a hole in a steel rod, bend it inward and fix it, and cover it with film for compaction.

Note: Reserve the inlet and outlet when covering the film.

1. Choose a venue

Small and simple greenhouses are best built in a place with a leeward and sunny background and flat terrain, and an area with a length of 30 meters and a width of 6 meters is planned as the site for building a greenhouse, and drainage ditches need to be dug around before construction, so as to avoid excessive water accumulation and can not be discharged in time, affecting crop growth.

2. Prepare tools

The tools needed to build a small and simple greenhouse are bamboo poles, lead wires, plastic films, steel rods, scissors, etc., and there are many types of films to choose from, such as anti-fog film, multi-functional film, etc., the length of the steel rod is about 1 meter and the diameter is 2-3 cm, and the bamboo pole should be prepared to be resistant to breaking and not easy to break.

3. Construction method.

When building a small simple greenhouse, according to the overall direction of the greenhouse, make a 50 cm deep hole every 60 cm steel rod on both sides, insert 1 bamboo pole into each hole, bend the bamboo pole on both sides inward into an arch, tie it tightly with lead wire, dig a 15 cm trench at the edge of the bamboo pole, and cover the edge of the film compact.

4. Precautions.

The distance of each bamboo pole to build a small simple greenhouse should be consistent, and the two sides should be aligned, so as to avoid data errors that cause the greenhouse to be distorted, and the film can not be completely wrapped and covered, and a movable curtain is reserved as the entrance and exit, which can also play a role in ventilation.

Summary. Simple bamboo frame greenhouse: is the most widespread type, the shed type is 5-6 meters wide, the top height is 2-3 meters, its advantages are convenient materials, easy to build, low cost.

Raised steel frame greenhouse: This kind of greenhouse is built by galvanized pipes with a diameter of 28-32 mm and a thickness of millimeters, with a high top of the meter, and the space of the whole shed is large, which is suitable for planting tall vine vegetables. Steel-bamboo mixed greenhouse:

The structure is the same as that of the simple bamboo frame greenhouse, which is combined with steel pipe and bamboo frame, which has the advantages of saving steel, reducing cost and convenient operation.

Simple bamboo frame greenhouse: is the most extensive type, the width of the shed is 5-6 meters, the top height is 2-3 meters, its advantages are convenient materials, easy to build, low cost. Raised steel frame greenhouse:

This kind of Dahukai liquid shed is made of galvanized pipes with a diameter of 28-32 mm and a thickness of millimeters, with a high top and a large space for the whole shed, which is suitable for growing tall vine vegetables. Steel and bamboo mixed greenhouse: the structure is the same as that of the simple bamboo frame greenhouse, and the combination of steel pipe and bamboo frame has the advantages of saving steel, reducing cost and convenient operation.

How to build a greenhouse 1, build a site (1) The greenhouse is more suitable for building in the sunny leeward, careful to avoid the disadvantage of drying, and the place with good water properties before discharge, the width of the general small greenhouse is about 5-6 meters, the height is about 25 meters, and the length is about 30 meters (2) After determining the specifications, you can use a tape measure to measure the distance, and then use lime to draw the location of the greenhouse.

2. Determine the position (1) Determine the position of each bamboo pole, especially the bamboo chain poles on the left and right sides of the greenhouse can not be over-nucleated and larger, otherwise there will be the consequences of distortion and deformation of the greenhouse. (2) Then according to the direction of the greenhouse, bury 1 bamboo pole every 60cm, and then make a hole according to the position of the bamboo pole, and the hole is about 50cm deep.

<>1. Determine the specifications and location: the width of the small greenhouse is usually about 5-6 meters, about the height of about meters, and about 30 meters long. 2. Start building:

According to the direction of the greenhouse, bury 1 bamboo pole every 60 cm, bend the corresponding bamboo pole on the left and right, tie it firmly with lead wire, so that the height is about a meter, and then along the direction of the greenhouse, the relatively straight bamboo pole is firmly tied to the roof of the shed, and the support rod is buried on the center spool in turn, and then the bamboo pole frame is covered with film, and the edge of the film can be tamped with soil.

1. Small and simple greenhouse construction method

1. Determine the specifications and location.

1) Small greenhouses are generally about 5-6 meters wide, about about meters high, and about 30 meters long.

2) After determining the specifications, measure the distance with a tape measure, and then draw the location of the greenhouse with lime.

2. Start building:

1) Positioning. Determine the position of each bamboo pole, especially the bamboo poles on the left and right sides of the greenhouse, to prevent excessive error from causing distortion and deformation of the greenhouse.

Depending on the direction of the greenhouse, 1 bamboo pole can be buried every 60 cm.

2) Make a hole. According to the position of each bamboo pole with a steel rod to make a hole, the depth of the hole is about 50 cm, if the soil is soft, the depth can be increased appropriately.

3) Buried rods. Insert the bamboo pole into the hole, and then bend the corresponding bamboo pole on the left and right, and tie it firmly with lead wire, with a height of meters. If the tip of the bamboo pole is too long, it can be sawn off.

Along the direction of the greenhouse, the relatively straight bamboo pole is firmly tied to the roof of the shed, and the support rod can be planted on the center axis of the greenhouse in turn.

4) Lamination. Dig 2 ditches along the edge of the bamboo pole feet on both sides of the greenhouse, with a depth of about 15 cm, and then cover the film on the bamboo pole frame, and the edge of the film should be buried in the ditch and tamped with soil.

Bury several bamboo poles at both ends of the greenhouse and cover them with film, but pay attention to reserving 1 movable curtain as a door and vent.

2. What materials are needed for small and simple greenhouses?

1. If you are building a simple film greenhouse, you need to prepare enough film, steel rods, bamboo poles, and other commonly used farm tools.

2. The film can be selected as ordinary film, anti-fog film, multi-functional longevity film and other types. The diameter of the steel rod should be 2-3 cm, and the length should be about 1 meter. Bamboo poles can be selected with thick walls and strong bending resistance.

3. In addition, it is necessary to prepare other common agricultural tools such as tape measure, No. 8 lead wire, hammer and so on.

4. The greenhouse can generally be built near the water source, with good drainage, high and dry terrain, leeward to the sun, and convenient transportation, and the orientation is suitable for the east-west direction, which is conducive to making full use of the light.