What is the help of the establishment of the small open distance micro photoelectric chip project fo

This has promoted and promoted the development of China's chip industry.

It can promote the further development of China's chip technology.

In life, the branch is of great help.

This must be able to promote the development of China's chip technology.

It can promote the further development of China's chip industry.

It can make our chip technology even better.

China is relatively backward in chips, which will make China rise rapidly in the field of chips.

It can improve our overall chip technology.

I think this is a big step forward in my country's research.

This will promote the progress of our country's technology.

It is divided into the following four parts: chip substrate, chip, module, and complete machine. Among them, the two industries of chip substrate and chip are relatively far behind your existing foundation.

(1) R&D expenditure refers to the various expenditures incurred in the process of research and development of intangible assets of enterprises, which belong to cost accounting subjects. Enterprises should set up a "R&D expenditure" account, which accounts for various expenditures incurred in the process of research and development of intangible assets.

2) This subject can be accounted for in detail according to the research and development project, "expensed expenditure" and "capital expenditure".

3) The debit balance at the end of the period of this account reflects the expenditure of the enterprise in the ongoing research and development of intangible assets to meet the capitalization conditions.

IAS 9 Research and Development Expenses, developed by the International Accounting Standards Board, stipulates that the costs of research and development activities include the following:

1.salaries, wages, and other personnel costs.

2.The cost of materials and the labor consumed.

3.Depreciation of equipment and facilities.

4.Rational allocation of manufacturing costs.

5.other costs" and so on.

The regulation of R&D expenses in China's relevant systems exists in two aspects: first, the "Accounting Standards for Business Enterprises No. 6 - Intangible Assets" issued by the Ministry of Finance and Accounting 2006 No. 3 on February 15, 2006; The second is the Enterprise Income Tax Law of the People's Republic of China, which was adopted by the Fifth Session of the Tenth National People's Congress of the People's Republic of China on March 16, 2007 and came into force on January 1, 2008. The former standardizes the recognition, measurement, recording and reporting methods of R&D expenses from the perspective of accounting; The latter regulates the aggregation and amortization of R&D expenses and the deduction of taxable income from the perspective of tax law.

Regardless of the cost, you can use PMU, which is equivalent to an intelligent power supply, multi-channel output, voltage adjustable, output timing can be controlled, with power management, there is an external interface to read relevant information, anyway, it is specially designed for mobile phones and tablets.

The so-called 8-inch means that the integrated circuit chip is produced on an 8-inch diameter wafer. The chip can't be as big as 8 inches.

Actionable reporting ......Not really. Feasible reports can only come out by doing their own research, and will they be available on the Internet?

Awesome, I didn't even know what an 8-inch silicon wafer was, so I dared to write a feasibility report on the production line project. **Department, or billions of dollars dare to smash like this!!

8-inch IC chip? Is there such a big integrated circuit? Haven't heard of it!

NRK10 speech recognition chip is a high-performance, low-cost offline voice recognition chip independently developed by Guangzhou Jiuxin Electronics, which has voice recognition and broadcast functions, and needs to plug-in SPI-flash to store entries or voice broadcast content. It has the advantages of high recognition rate, industrial-grade performance, simple and easy to use, and easy to update entries. It is widely used in smart home, AI artificial intelligence, toys and other fields.

I haven't designed it, but I said that I have seen more of my self-feelings: generally look at the demand first, look at the industrial or civil, the civilian chip will be cheaper than the industrial use, and then look at the chip function, 8 bits can meet the 16 bits, 51 can meet the ARM, ** the poor is not nothing, much worse is a waste of profits, and then look at the chip power supply voltage and input and output drive voltage, circuits, like CMOS and TTL voltage are different, pay attention to the design, and then the pin function, Which ones should be connected to pull up and down,To read the manual,I didn't understand the DM9000,But I understand the MAX232,I'll design the serial port.,The rest is not there, I feel that it is,If you don't have someone to guide you, I should be about the same.。

The whole set of units is generally composed of diesel engine, generator, control box, fuel tank, starting and control battery, protection device, emergency cabinet and other components.

It has experienced being listed as a key enterprise by the province, the scenery of construction, and then the rupture of the capital chain, and finally become an unfinished project.

One party insisted that the other party did not carry out the factory's production in accordance with the contract. The specific reasons still need to be investigated in detail by the relevant departments.

How did the relevant departments find out that this is indeed the case, and such people also need to be punished by law, and it is precisely because of the constant contradictions between the two sides that the project has gradually been shelved and has become an unfinished project. This is quite a waste of resources, and it is also hoped that the relevant departments can quickly investigate clearly, and at the same time, I hope that these projects can be realized as soon as possible, because once such projects are realized, they will also have a great effect on the development of the country and the progress of the local area, of course, everyone needs to abide by the premise of the law. Such a project can be realized very quickly.

When this project was built, the scenery was infinite, the reputation was very loud, and it was also listed as a key enterprise at that time, but in the end, because of the monopoly of the investor's capital chain, it could not take out the money to continue to build, and it became an unfinished project.

From star projects to unfinished projects, the company's chip projects have experienced hasty launches, broken capital chains, and partner disputes. Overseas experts returned to China to cooperate in the research and development of "chips" The company has no money after buying land and building a building, and the partners have a lawsuit dispute: the chip research and development was not completed as agreed, and the official reply:

The company's land is legally obtained through formal transfer, and the chip industry needs to be vigilant: the entrepreneurial team is "impetuous", and the local government is "throwing money".

As a star company, it has always been very famous, but later the chip project stalled, and the company became an unfinished building, because the two partners had a difference of opinion, which led to the project being forced to stop.

The chain of funds is broken. The start-up's rush for quick success and quick profit led to serious problems in the overall planning, and it was unable to carry out construction and development in the future.

The front end of the technology was listed as a key project by the province, and it was hurriedly launched, and the scenery of the drawing and construction was unlimited, the capital chain was broken, the partners were disputed, and finally it was unfinished.

In fact, to be honest, all the unfinished projects are due to the lack of funds, so it cannot be said that the construction party is responsible for the unfinished project, and it may also be the failure of Party A's investment.

The asynchronous chip design course in the VLSI project of the USC in the United States, which starts in the spring, Peter is the former chief scientist of Intel, the content is asynchronous chip design, note that it is a pure asynchronous chip, not a commonly used cross-clock domain asynchronous circuit in the industry, this course belongs to black technology, almost no companies are using it now, and there are only a handful of people in the world who do this, it is difficult to achieve, mainly concentrated in Stanford, Caltech and USC, The EDA software that is now needed for the course is his own product and that of his doctoral students. The content is more difficult, but the score is not low, and the most important thing is that the person who gets A in his class has the opportunity to do his DR, Peter DR quality assurance, Peter DR has no job that cannot be found. It is worth noting that in the past two years, Peter seems to have a tendency not to teach this lesson, and he has been replaced by a teacher from Caltech, which has greatly reduced the accessibility of this lesson.