How to make the win system into an XP system?

This method is suitable for all versions of Vista and Windows (XP, Win7, Win8, etc.).

Many people will encounter the problem of installing the system, and the following are several common and simple ways to install the system:

Processor: 1 GHz 32-bit or 64-bit processor.

Memory: 1 GB and above.

Graphics: Support DirectX 9 128M and above (with Aero effect enabled).

Hard disk space: 16G or more (primary partition, NTFS format).

Display: A resolution of 1024x768 pixels or more is required (below which some functions cannot be displayed properly), or a display device that can support touch technology.

Win8, system: The minimum configuration requirements given by Microsoft are as follows:

1.1G or above 32-bit (x86) or 64-bit (x64) processor.

2.1G RAM (32-bit) or 2G RAM (64-bit).

3.16G HDD (32-bit) or 20G HDD (64-bit).

DirectX9 graphics card with drivers or above.

WinXP and Vista system: It is a computer that is in line, and now most of them are installed with XP, so I won't talk about it.

The choice of each system version: Friends who don't understand the above requirements can roughly judge for themselves, if your memory is less than 4G, install a 32-bit system; 64-bit system with 4 GB or more RAM.

2. Extract the ** file to disk E (or d, f), it is best to extract it directly to the disk, do not extract it to any folder (because some friends will not choose or do not understand the problem in the following operations). 3. After unzipping, find the ghost image installer. exe (or possibly a hard disk installer, etc.), double-click to run.

4. Click OK in the open window, click OK when you encounter anything, and then start the installation (you may restart the computer during this process, don't worry).

Note: Back up the important data stored in the C drive to another disk before the operation.

Just follow the methods and steps step by step, and it's very detailed.

Note: Prepare important information stored in the C drive to other disks before operation.

The second method is more powerful, and there are many tools in PE, including partitioning, boot recovery, etc., which can be used by friends who are familiar with point installation.

Special note: If there is an accident during the installation process or the installation of individual machines is not satisfactory or ideal, or there are hidden partitions in some hard disks, please enter the PE system to repartition and reinstall.

The XP system is a kind of win system.

Startup Method:

1. You can enter the BIOS settings by forcing the shutdown.

We directly press and hold the power button on the computer console with our fingers for about 6 seconds to force the computer to shut down. Then select the corresponding motherboard BIOS quick boot, after entering the BIOS settings, find the Legacy and UEFI options, and then select Legacy to enter the USB flash drive to boot.

2. The Windows 10 system enters the BIOS setting interface after restarting in "Computer Settings" - Advanced Startup.

Enter the win10 system desktop, directly press the "win+i" shortcut key combination to open the win10 system's charm "charm bar", click "change computer settings", select "computer settings" - general", there is an advanced startup function at the bottom, activate the restart button now, when the computer restarts, we can see the "choose an option" interface, and then select "troubleshooting", and then see three options, we click on the bottom "advanced options", Next we can see the "UEFI firmware settings" - this UEFI firmware settings is a BIOS specification launched by Intel, and finally we can start to restart the computer, when the computer restarts, the system will automatically enter the BIOS settings interface.

3. You can enter the BIOS setting interface by modifying the power options.

Left or right click the power icon in the lower right corner of the desktop, then enter the power options, and then click "Require password when waking up", the settings at the bottom of the page are hidden, this change method cannot be changed directly, you need to click "Change the settings that are not currently available" at the top of the following page before you can change it.

Install one from scratch with ghost and you're good to go.

1. Borrow or buy a GHCST XP system CD-ROM, you can also decompress it from the Internet, do not unzip it, burn it with the following method: run nero - file menu - open, file type selection *iso, select the ISO file of your **.

In addition, it should be noted that the writing method is selected as "Disc Burn at a Time", and the burning speed is best at 8-24x times. This type of disc is automatically installed on the C drive and all files in the original C drive are deleted.

2. Set the optical drive to start.

Award BIOS settings.

Reboot, press Del to enter the BIOS, find the Advanced BIOS Features and press Enter to enter the Advanced BIOS Features interface.

Find the First Boot Device, turn the page with PGUP or PGDN to change HDD-O to CDROM (Potato Disc Drive Boot), press ESC, press F10, press Y, press Enter, save and exit.

AMI BIOS settings Zen Wang.

Start the computer, press Del to enter the main interface of the AMI BIOS setup program, use the arrow keys to find "Boot" in the upper menu, press Enter, use the arrow keys in the open interface Check "Boot Device Priority", press Enter, select "1st Boot Device", press Enter, enter the Options interface, use the PGUP or PGDN keys to set "1st Boot Device" to "CD *** ：3s-ph...(CD-ROM Start)", press ESC, press F10, press Y, press Enter, save and exit.

3. Disc installation.

1. Put the disc into the optical drive, restart it, and see the CD ...... appear at the bottom of the screenWhen the word is written, press any key in time, otherwise the computer will skip the light and start from the hard disk again.

2. Use the arrow keys on the keyboard to select "Install XP System to the First Partition of the Hard Disk" and press Enter.

3. Enter the copy installation interface, the following is automatic, don't move anything, if you don't want to install some drivers, you can manually select the process roughly: display the copy progress, restart, automatic installation driver, XP installer, please wait (take a long time, wait patiently), the last task is being executed, automatic restart, and enter the desktop after displaying "Welcome".

4. Manually set the monitor resolution and refresh rate, and you're done.

Oh, if you want to buy a CD, there are also USB sticks that I don't know which one you want to learn.

If the configuration is appropriate, you can use Heiyun to reinstall the software with one click, which is very convenient.

You need to reinstall the system, and you need to see if your computer hardware can meet the system requirements!

Are you talking about the theme interface of Windows 7 or the direct Windows 7 system?

XP system changed to WDINDOWS?? You want to ask how to change it to Windows 7 or Windows 8, right?

A large number of whites poured into the territory of our brain-plus money party.