How to make an XP system into an ISO

The problem is not clear enough.

1.If you want to make the XP system disk you want to install into an ISO, that's okay and it's very simple.

2.Or make the installed XP system ISO, which is very difficult and troublesome. Generally, it is made into a gho image, which is ghost. That's easy.

1.Insert the existing system disk into the optical drive.

2.Open UltraISO, Tools - Make Disc Image File - Change the ISO File Storage Path (easy to find by yourself) - Make - Wait for it to finish.

Target 2: Making an ISO is cumbersome, unnecessary, and unsafe. If you can't get your original system, you'll run. It is recommended to use ghost to make a gho image, and it will be returned soon after direct recovery.

I won't talk about how to use ghost, and there are more on the Internet. Find out for yourself.

Use the software to search nero,Then**After the installation is completed,Put the disc into the optical drive,Then open nero,Find the copy disc,Then select the path,Click copy to start copying,After the copy is completed, it will generate an ISO file under the path you just set。 (The premise is that your computer has a burner with burning function).

Find a burning software, and then put the disc in it, there is a production image file in it, add everything in the disc, and the one that is made. iso file.

Everyone has little understanding of the xp Chinese simplified Chinese version of the ISO system search, but some users who have installed this operating system have reported that it is very easy to use, integrating the most commonly used installation software and the most complete universal hardware driver, with more secure, stable and humanized characteristics. If you also want a ** suitable XP Chinese Simplified Chinese version of the ISO system, then you can read the following specific ** address.

Green tea system ghostxpsp3 official Chinese Simplified Chinese version

User comments: One-click unattended installation, automatic identification of hardware and installation of drivers, greatly shortening the installation time, and faster recovery and higher efficiency, which has attracted the attention of countless system enthusiasts.

Tomato Garden ghostxpsp3 free pure version

User comments: The software has been carefully set up in accordance with user habits, the driver support is new and comprehensive, the system is clean and non-toxic, you can rest assured that you can install and use! Coupled with the carefully selected system maintenance tools and the unique humanized design of the Tomato Garden, we are committed to providing the best and fastest operation experience, which I believe will bring you surprises.

Deepin technology ghostxpsp3 full installation version

With the latest technology, it is perfectly compatible with new and old models such as desktops, brand computers and notebooks, and is safe and non-toxic, making it the best choice for your installation.

Computer company dngsghostxpsp3 official pure version

User comments: integrated computer notebook desktop a large number of drivers, can also adapt to other computer system installation, the whole process of installation is about 6 minutes, some machines can reach 5 minutes, efficient installation process, concurrent, stability, security is stronger! Completely unattended automatic installation, the most important thing is to have a personalized design, which is the first choice for rapid installation in computer city, individuals and companies.

Rainforest Wood Wind ghostxpsp3 Official Pro

User Comments: Support one-click automatic and fast backup under Windows to restore the system, easy and worry-free maintenance. The system is only appropriately streamlined and optimized, fully retaining the original performance and compatibility on the basis of pursuing speed, integrating the most commonly used office, entertainment, maintenance and beautification tools, and collecting commonly used hardware drivers in the market.

Use PE tool software to make a boot disk, such as Chinese cabbage PE tool, Chenfeng, PE general toolbox, make a USB flash drive into a boot USB flash drive, and then extract the GHO file in your ISO image and put it in the root directory of the USB flash drive.

Step 1. **And install the Chinese cabbage installation version, open the installed Chinese cabbage installation version, insert the U disk and wait for the software to successfully read the U disk, and click "One-click production to start the U disk" to enter the next step. This is shown in the figure below.

2 Step 2. In the pop-up dialog box, click OK to proceed to the next step. This is shown in the figure below.

3 Step 3. Wait patiently for the process of writing Chinese cabbage-related data to the U disk of the U disk of the Chinese cabbage installation version of the U disk production tool. This is shown in the figure below.

4 Step 4. After the writing is completed, in the pop-up message prompt, click "Yes (y)" to enter the simulated computer. This is shown in the figure below.

5 Step 5. The successful boot of the simulated computer means that the Chinese cabbage USB flash drive boot disk has been successfully made, hold down Ctrl+Alt to release the mouse, and click to close the window to complete the operation. This is shown in the figure below.

You can open the ISO file directly when you install WinRAR.,There's a 700M file in it.,That's it.,Just copy this into the U disk.。

The image file is a GHO file, you can use a floppy disk to extract the GHO file, ISO files can also be directly burned to a U disk as a U disk boot disk, and after burning, it can be used as a boot disk, no need to write a boot file.

Directly in the 360 software butler has the "computer store" software to make a U disk to start! Fast and efficient!

The next ghost version is much simpler. What you are under is the installed version. Troublesome.

Steps to install the original XP system:

2.First, connect the [U Depth U Disk Boot Disk] to the computer, restart the computer and wait for the boot screen to appear, press the start shortcut key, use the U disk boot disk to enter the U Depth main menu, select U Depth Win8pe Standard Edition (new machine), and press the Enter key to enter.

3.After entering PE, it will automatically start the U depth PE installation tool, click first"Browse"Add the system image saved in the U disk, then select the C disk as the system disk storage image, and click "OK" on the friend comb branch.

4.At this time, we will be asked to enter the product key, and we will enter the prepared product key and click on the orange to confirm.

5.The tool starts working, first formatting and then installing the original XP system.

6.When you're done, you'll be prompted to restart, click"Yes (y)."

7.After restarting, the installer will start copying the files and wait for it to complete.

8.The installation process of the original XP system will be automatically completed by the computer for us, and if a new sensitive prompt pops up during the installation process, we can install the corresponding prompt to fill in.

Use. ISO image file.

How to install the XP system.

Hard Disk Edition. (**Address: Sky Software Park), and then install this software on the computer, when installing, there is a waiting period of more than 30 seconds, and after a while, "Complete" appears This means that the installation is successful.

ISO file.

In the case of GHO.

Suffix name. After extracting the operating system, put it on one of the hard drives.

Drive letter. (Except.)

C disk. of any drive letter), of course, you can also unzip this ISO file and put a wixp

gho file.

Find and place it on the hard disk (except the C drive) on any drive letter.

3) Then run this again.

One click.

Restore (hard disk version) this software, after entering this software, at the beginning, which".

One-click recovery. "It's grayed out, there's no way to click on it, so you'll have to pay attention to it in the menu above.

A button called "Import", click which "Import" here will come up with a box, that is, you want to import the previously extracted "mirror", that is, which is named WinXP with GHO as the suffix, GHO operating system, after finding the image, click "Open" to import, which "one-click recovery" button has changed from gray to clickable button, you click "one-click recovery", the computer will start to restart, the system will start to restore with one click, this process is automated, don't click, After a while it starts again.

Install the system. Finish.

4) It can also be like this: first, a software called "(hard disk installation version) ghost installer", and then put ** which ISO is the file name of the system, whether it is XP, or win7, and then create a folder, put this (hard disk installation version) ghost installer.

Put it in the same folder as the system of this ISO.,Click on this ghost installer.,Open this software.,Operation method:Restore from ISO:Select "Restore"-click"。。

Select the ISO file - select the ghost image - execute, and that's it.

Restore the system. It's time to start installing the automatic restart system, and it's all automated in the future, so it's OK.