Lathe 6163B motor action, fast left and right can only move forward what is the reason?

See if the forward receiver is not engaged. If not, move forward with the party. There is one under the handle. Is the proximity switch not approaching?

Lathe 61633b, the motor action is fast, left and right can support the forward, can not move, that is, the clutch is not closed tightly, the closure is not tight, so the front does not move.

When the machine tool motor is working, if you can quickly leave and right, but you can't move forward, it should be said that there is a problem with the command you sent, and it is recommended that you adjust the command programming.

The work of the motor of the 3b of Liuliu, the quick hand can move freely before and after, it may be that the elevator is faulty, or the line is faulty, and the reason is three minutes.

The 6163b motor moves fast, left and right, only the reason why it can't move forward? Enter, and then move quickly, only the left and right can not move, it should be ** appeared. Short circuit, please ask a professional to overhaul it.

The action of clicking is generally used quickly before and after, to carry out an operation, according to the system can be controlled, if it cannot be advanced, it must be a problem with the control linkage lever.

In most cases, the controller is broken, and you can check the parameters of the controller.

You can quickly leave and right, only move forward, in this case you should find a professional person to repair it quickly. You generally have electricians.

The movement of the turret is the power given by the hydraulic system, if it can't move, you can loosen the gap screw, and then use lubrication, lubrication!

You should ask a professional master to see this situation in person, this problem cannot be solved here.

Out of the city into 163 tired movements, the level of rapid consciousness can enter the full announcement, all quickly then can be the theory of the stuck.

Lathe you want you, fast, career prospects, one, may be **stuck?

Lathe 613b, the motor can move directly after the left and right, and it can't move for any reason, it is smashed when it goes forward, and it is repaired by a repairer.

The motor action of the lathe 6163b. After fast left and right, you can only move forward, you first see if he has a problem in the settings? Or are you getting stuck?

The lathe 6136 motor works fast and left, and the rear wheels can move forward, because there is a problem with the control.

The weight of the car is 6163 b, the motor moves fast, and the left and right can only move forward, what is the matter? Because he had a problem with the settings.

The motor of Zhao Cheng 6163 moves quickly, and the left and right can only move forward, and the reason why it can't move is that there is no rear gear.

The yellow 6163b motor moves fast, and the left and right can only move forward, what is the reason? This must be out of order, find the master to take a look.

What is the reason why the lathe 6163b electric action is fast and can be pointed forward, but it can't move? Is it because there is no one?

C6163 lathe fast motor action, but can not move fast: check whether the fast motor of the equipment is always in working condition, and whether the quick button is short-circuited.

Ordinary lathe is a horizontal lathe that can process a variety of processes for various types of workpieces such as shafts, discs, rings, etc., and is often used to process the internal and external rotating surfaces, end faces and various internal and external threads of the workpiece, using corresponding tools and accessories, and can also be drilled, reamed, tapped, and knurled. Ordinary lathes are the most widely used lathes, accounting for about 65% of the total number of lathes, and are called horizontal lathes because their spindles are placed horizontally.

Structural function. The main components of CA6140 ordinary lathe are: spindle box, feed box, slide box, tool holder, tailstock, smooth bar, lead screw and bed.

Headstock: also known as bedside box, its main task is to pass the rotary motion from the main motor through a series of speed changing mechanisms to make the spindle get the required forward and negative steering speeds, and at the same time, the spindle box divides part of the power to transmit the movement to the feed box. The middle spindle of the headstock is a key part of the lathe.

The smoothness of the spindle running on the bearing directly affects the machining quality of the workpiece, and once the rotation accuracy of the spindle is reduced, the use value of the machine tool will be reduced.

Feed box: also known as the tool box, the feed box is equipped with a variable speed mechanism for feed movement, adjust its variable speed mechanism, the required feed or pitch can be obtained, and the movement is transmitted to the tool holder for cutting through a smooth bar or lead screw.

Lead screw and smooth bar: It is used to connect the feed box and the slide box, and transmit the movement and power of the feed box to the slide box, so that the slide box can obtain longitudinal linear motion. The lead screw is specially set up for turning various threads, and when turning other surfaces into the workpiece, only the smooth bar is used, and the lead screw is not used.

Slide box: It is the control box of the feed movement of the lathe, which is equipped with a mechanism that turns the rotary motion of the smooth bar and the lead screw into the linear motion of the tool holder, realizes the longitudinal feed movement, transverse feed movement and rapid movement of the tool holder through the smooth bar transmission, and drives the tool holder to do longitudinal linear motion through the lead screw in order to turn the thread.

Tool holder: The tool holder component is composed of several layers of tool holder, and its function is to clamp the tool and make the tool make longitudinal, transverse or oblique feed movement.

Tailstock: Installed as a rear center for positioning support, and drilling tools such as drills and reamers can also be installed for hole processing.

Bed: The main parts of the lathe are installed on the bed, so that they can maintain an accurate relative position while working.

Hello. The question is more complicated. It needs to be investigated professionally.

Walking back and forth to see,. The other one dismantled the quick click to see if there was a problem with the connection inside. Other than that, it's not that easy to do.

I think it's a problem with the knife box. Can a fork drive a gear gear? Is there any damage to the motor coupling, etc.!