-
If you need to turn off the control of the headset on the phone, then you can only choose to set the phone headset.
Disconnect, in which case it's fine.
-
Just disconnect the link between the earphones and the phone, and if the wired earphones are wired, just unplug them.
If you have a wireless Bluetooth headset, disconnect the Bluetooth link.
-
Your headset is in-line or Bluetooth, if it is in-line control, it can't be turned off, if it's a Bluetooth headset, you can turn off the Bluetooth function of the phone.
-
This mode cannot be turned off by itself, and can only be selected in the linear control mode after connecting the headphones, and you can cancel it.
-
As long as you turn off the control of the mobile phone earphone earphone, then you can directly unplug the earphone or turn off the Bluetooth earphone.
-
You can pull out the earphone cable or turn off Bluetooth to make sure that the earphone is not connected to the mobile phone.
-
How to turn off the headphones' control of your phoneWhen we use our mobile phones to make calls, we often use the headset mode, so how to cancel the headset mode of the mobile phone? Let's explain how to do it.
First, open your phone's Settings
Click General
In the general interface, tap Accessibility
Scroll down to [Audio Call].
Click to select [Speaker]. Summary.
1. First of all, open the mobile phone [Settings].
2. Click [General].
3. In the general interface, click [Accessibility].
4. Scroll down to [Audio Call].
5. Click to select [Speaker].
Precautions. Tip: This method is suitable for ** during the process, automatically connect and turn on the speaker, and it is very suitable for mobile phones with low call sound.
-
How do I turn off my phone's headphone mode? Hello dear, method one, you can restore your phone. Open Settings, select System, tap Reset, select Reset All Settings, and click Reset All Settings.
Method 2, if it is an Apple phone, open Settings, tap General, select Accessibility, tap Audio Call Mode, and select it as Automatic. Method 3: Under normal circumstances, unplug the earphones to disable the mode. Method 4: If the headphone mode is still not activated, it is recommended to use a paper towel or cotton swab to clean the headphone jack.
If none of the above four methods can remove the mode, it is recommended to send it for repair. The steps to cancel the headphone mode on the phone are as follows:1
First, find the [Settings] app on the desktop, and click to enter the settings management page. 2.Then in the [Settings] page, scroll the page to find the option [Smart Assist], and click on it to enter the new settings page.
3.In the management page of [Smart Assist], find the option of [Smart Line Control] and click this option to enter the management page of headphone mode. 4.
After entering the [Smart Line Remote] mode, the page shows that the Smart Line Remote has turned on the support for the [Headphone Mode] of the mobile phone. 5.On the page, turn off the switch on the right side of [Smart Line Remote] to successfully cancel the headset mode of the mobile phone.
-
How to cancel the headphone mode of Huawei mobile phones.
-
Step 2: Then click [breeno] and select [breeno voice] to enter;
Step 3: Finally, turn off the wire control earphone to wake up to turn off the earphone mode.
iOS: Step 1: Open your phone's settings.
Step 2: Then click [Accessibility] and select [Touch Click].
Step 3: Then click [Audio Call Mode] and select [Speaker].
Step 4: Finally, return to the page to turn off the headphone mode.
-
It is the copper contact switch in the headphone jack that has poor contact or the center point is damaged and cannot be reset.
The situation that can be solved by yourself is:
1. The contacts of the earphone socket are adhered to, and the socket is plugged and unplugged several times to disconnect it and reconnect.
2. The dirt in the earphone jack causes poor contact, and it is possible to use anhydrous alcohol to clean the inside of the socket.
3. If you can't solve the problem by yourself, please go to the maintenance point to replace the headphone jack.
-
Smartphone shutdown is usually similar, the following is an example of a Huawei segment chain high mobile phone, the specific operation is as follows:
1. Hold the ruler to open the "Settings" menu;
2. Find the "Smart Assist" item in the menu and click Confirm;
3. Find "Smart Wire Control" in the "Smart Assist" menu, and the option is displayed as on. Click to open the change option;
4. Click the switch button after the "Smart Line Control" option to turn off the function;
5. The "Smart Line Control" function is successfully disabled, and the HUAWEI earphone mode is successfully canceled.
-
Summary. Hello! Kiss To unlock your phone's headphone mode, here are a few things you can try:
1.Replug the earphones: Insert the earphones into the phone's headphone jack and quickly pull them out, repeat a few times, sometimes the plugging and unplugging action will activate the phone's auto-detection function to make it exit the headphone mode.
2.Clean the headphone jack: Sometimes dust or dirt can cause the headphone jack not to work properly.
Use a cotton swab to gently clean the inside of the jack and make sure there are no clutter blockages. 3.Software Restart:
Try restarting your phone's software. On your Android phone, press and hold the power button and select Restart; On an Apple phone, press and hold the power button and the volume button at the same time until the slide to power off prompt appears, then slide to turn off the phone, and then press and hold the power button to turn it on. 4.
Hello! To unlock your phone's headphone mode, you can try the following methods:1
Replug the earphones: Insert the earphones into the phone's headphone jack and quickly pull them out, repeat a few times, sometimes the plugging and unplugging action will activate the phone's auto-detection function to make it exit the headphone mode. 2.
Clean the headphone jack: Sometimes dust or dirt can cause the headphone jack to not work properly. Use a cotton swab to gently clean the inside of the jack and make sure there are no clutter blockages.
3.Software Restart: Try restarting your phone's software.
On your Android phone, press and hold the power button and select Restart; On your phone, press and hold the power button and the volume button at the same time until the sliding power off prompt appears, then slide to turn off the phone, and then press and hold the power button to turn it on. 4.Check the settings:
Go to your phone's settings menu, find the audio or sound settings option, and check if there are any headphone-related settings, such as turning off the headphone detection function.
Kiss 1Use other headphones: Try using different headphones, sometimes the problem with the headphones themselves can cause the phone to mistakenly think that the headphones are always plugged in.
2.Software updates: Check to see if a system or app update is available on your phone.
Sometimes updating the software can be simple to fix some headphone mode issues. 3.Reset your phone:
If none of the above works, you can try resetting your phone to factory settings. Take care to back up your important data because a factory reset will erase all the data on your phone.
-
Start by checking the headphone jack on the top of your phone for dust or foreign objects. If you have one, use a cotton swab or a small brush to gently clean the headphone jack. 2.
Plug the headphones in and out of the headphone jack a few times to make sure there are no issues with the connection between the plug and the jack. 3.If you're using wireless headphones, make sure Bluetooth is turned off or disconnect your phone from your headphones.
4.Open your phone's audio control panel and make sure the volume is turned up to maximum to make sure you can hear the sound. 5.
Press the volume up or down button on your phone to see if the volume bar or headphone mode prompt appears. If it appears, try turning the volume up to maximum and pressing the volume down key again to see if headphone mode is lifted. 6.
If none of the above methods solve the problem, you can try restarting your phone. Press and hold your phone's power button to select the Restart or Restart option. 7.
If the problem persists, you may need to contact the phone manufacturer's customer service or send your phone in for repair to fix the problem that headphone mode won't resolve. Please note that the above methods may vary depending on the phone model and OS version. If your phone can't disarm the headphone mode, please refer to your phone's user manual or contact your phone manufacturer for more detailed guidance.
Maybe your bluetooth headset is not in a searchable state, just like my iphone 4s with Rapoo H6020 bluetooth headset, it must be when it is off, press and hold the power button (some press the multi-function button), until the green light flashes quickly, at this time, turn on the mobile phone Bluetooth to search for the Bluetooth headset device name, click to pair, and then turn on the phone**device to listen**. The operation of Bluetooth headsets is much the same. My Bluetooth headset is very power-saving and trouble-free, and the sound quality of playing and listening to songs is very good.
First of all, you have to check the manual, see how to turn on the headphones, etc., and then use the phone's Bluetooth to search for the device (some Bluetooth needs to be turned on "be searched", Xiang Xiang said). If you find it, connect it and you can pair it with ......Note: Different phone models may lead to different operations, but generally follow this principle! )
For Apple phones, everyone is very familiar with them. To put it simply, the release of the system has helped us solve a lot of problems to a great extent. Not only that, the operation interface of the new system has changed very much, and the corresponding functions are also very complete. >>>More
You can turn off background apps in the following ways:
1.If you are a device that supports virtual navigation, it is recommended that you click the square button in the navigation bar at the bottom of the screen to enter the taskbar interface. >>>More
When the Huawei phone is not plugged in the headphones, the headset mode is displayed, and there are many reasons, mainly due to the following reasons. >>>More