Why can t the Bluetooth headset be paired with the phone? The Bluetooth headset cannot be found when

Maybe your bluetooth headset is not in a searchable state, just like my iphone 4s with Rapoo H6020 bluetooth headset, it must be when it is off, press and hold the power button (some press the multi-function button), until the green light flashes quickly, at this time, turn on the mobile phone Bluetooth to search for the Bluetooth headset device name, click to pair, and then turn on the phone**device to listen**. The operation of Bluetooth headsets is much the same. My Bluetooth headset is very power-saving and trouble-free, and the sound quality of playing and listening to songs is very good.

Because Bluetooth two is not the same brand.

It looks like the system doesn't support it.

Good evening, my treasure<>

Bluetooth earbuds do not have pairing mode turned on: Please make sure that your Bluetooth earbuds have pairing mode turned on, usually you need to press and hold the pairing button on the earbuds until the indicator light starts flashing. 2.

The Bluetooth headset is already connected to another device: Please make sure that your Bluetooth headset is not connected to another device, if it is already connected to another device, you need to disconnect it first, and then search again. 3.

Unstable Bluetooth signal on your phone: Please make sure that your phone's Bluetooth signal is stable, if the signal is unstable, it may cause the device to not be searched. You can try to keep your phone and headphones as close together as possible, or try searching elsewhere.

4.Your phone's Bluetooth function is malfunctioning: If none of the above methods can solve the problem, it may be that your phone's Bluetooth function is malfunctioning.

You can try restarting your phone, or factory reset your phone. In short, if your mobile phone Bluetooth can not find the headset set to set up a travel room, you can try the above methods, if the problem persists, it is recommended that you contact the mobile phone manufacturer or Bluetooth headset manufacturer for help.

Hello friend, it's a pleasure to serve you, I have seen your problem, according to my understanding, there are many possible reasons why the Bluetooth headset device is turned on but the Bluetooth headset device cannot be searched, and the following are some common problems and solutions:1Bluetooth headset not turning on:

Please make sure your Bluetooth headphones are turned on and in pairable mode. 2.The bluetooth headset has been connected to other devices:

You can try to turn off Hanhu Bluetooth, then restart your phone's Bluetooth, or restart your phone to fix the problem. If you still can't fix the problem, try re-pairing the Bluetooth headphones and make sure your phone and headphones are updated to the latest version of the firmware. If the problem persists, you can try contacting the relevant technical support for further assistance.

The reasons why the phone and the Bluetooth headset cannot be paired are as follows:

1. The Bluetooth headset has not entered the pairing mode, turn on the pairing mode and then connect it.

2. I have connected with other mobile phones and saved the previous pairing records, and I need to delete the previously saved records and pair them again.

3. The Bluetooth of the mobile phone is not compatible with the Bluetooth version of the headset, or the Bluetooth is damaged, and it needs to be returned or repaired by a professional.

Features of Bluetooth headset:

1. Voice chat artifact.

Bluetooth users don't need to talk to the river microphone, and can easily and comfortably chat with people in real time.

2. Reduce mobile phone radiation.

With the function of answering**, you can avoid your mobile phone from directly contacting people's heads, reduce the radiation of the hand rock deliminator, and also reduce the probability of the mobile phone falling.

3. Be more relaxed when exercising.

It adopts wireless design, which is more convenient for people to exercise with, and many Bluetooth headsets are designed with hanging ears, which are very comfortable and firm to wear, even if they love to exercise, they will not fall, and they have the function of supporting **** and hands-free, so that users will not miss anything when exercising. <>

Dear Hello is happy to answer your questions, if your phone does not have the pairing option of Bluetooth headphones, you may need to update your phone's operating system or try to use a new Bluetooth headset. If your phone still won't pair with your Bluetooth headphones, it's recommended to contact your phone manufacturer or service provider for more help and advice. In addition, you can also try the following steps to fix the problem:

1.Make sure the Bluetooth headset is turned on and in pairing mode. Normally, you need to press and hold the power button on the headphones for a few seconds until the indicator flashes, indicating pairing mode.

2.Enable Bluetooth on your phone and search for available devices to pair. Please note that different phone brands and models may have different Bluetooth pairing methods, please check your phone's user manual for more specific guidance.

3.If your phone is able to scan for Bluetooth headphones but can't connect, make sure you enter the correct pairing code. Usually, the pairing code for the headset will also be listed in the user manual.

4.Try pairing in a different environment, such as in an open space, away from other wireless devices, etc. If you're still having trouble pairing your Bluetooth headphones, consider using a wired headset or seek help from a professional technician.

I hope my answer can help you.

Solution: There will be a function button on the Bluetooth headset, this multi-functional button has a function is to match the device and the Bluetooth headset, when connecting with the mobile phone, you need to press and hold this function key, and at the same time you need to open the Bluetooth function of the mobile phone to search, click after seeing the corresponding earphone name, and confirm the pairing to connect.

There are other situations, or the Bluetooth function of the mobile phone or headset is damaged, and it cannot transmit and receive Bluetooth signals normally, then it needs to be repaired.

Use of Bluetooth headsets:

For the first time, try to charge the headphones for about 2-4 hours, and then charge them for 2 hours, the instructions also say so, it is best not to exceed 4 hours, some forums say that it must be charged for 24 hours is unfounded, such a small earphone, charged for 24 hours, some are too exaggerated.

Tap the Bluetooth settings in your phone's settings, select On, and you're done. This turns on the phone's Bluetooth support.

In the Bluetooth headset off state, press and hold the multi-function button MFB of the earphone for more than 3 seconds, and wait for the indicator blue light on the earphone to light up (1, note that it is always on, the pairing process has been always on, not flashing or not lighting 2, and some empty devices are flashing red and blue alternately), at this time, the Bluetooth headset is already in a state that can be found. Lack of locust.

Hello, dear! Check if the Bluetooth headset is not turned on and the search mode is turned on, try to delete the Bluetooth device in the Bluetooth list, or check whether the phone has turned on the Bluetooth visible mode or restore the Bluetooth headset to factory settings. Here's a closer look:

1. The Bluetooth headset is not powered on and is in the search state, after the Bluetooth headset is turned off, press and hold the multi-function button (that is, the red and blue lights flash alternately) to activate Bluetooth pairing; The Bluetooth headset will be paired within three minutes after being turned on, and it will automatically shut down after three minutes, so pair with the phone as soon as possible after turning on the matching; 2. If there is an error in the program of the Bluetooth headset, you can restore the headset to factory settings and then use it; You can try to check whether you can search for other devices with Bluetooth function, and rule out whether it is Bluetooth compatibility or Bluetooth settings of the other person's phone. Bluetooth devices can also try a factory reset; Press and hold the multi-function button for about three seconds while charging, and then you can restore the factory settings after seeing the red and blue lights flash three times alternately. 3. There is an error in the Bluetooth program of the mobile phone. Restart the phone, then clear the Bluetooth device in the phone, delete the Bluetooth device in the phone, and try again; Check whether the Bluetooth visible function is turned on on the phone, and enter the Bluetooth device interface to check whether the phone is visible to all devices;