-
1. The braking rate of the whole vehicle is unqualified. Generally speaking, the braking rate of the whole vehicle is not enough, because the braking performance of a certain axle is not good, and the axle braking force is solved, then the braking rate of the whole vehicle is qualified. The front and rear axles are qualified, if the whole vehicle is unqualified, then you can ask for loading, the easiest way is for you to find a few people to sit in the car.
If it's a large car, you'll need to talk to the staff and ask them to lift the brake bench.
2.The axle braking rate is not enough. Reason 1
The brake pad is worn too much and the clearance is too large, so you can ask the mechanic to adjust the brakes. Generally, there are repair stalls near the inspection station, the cost is not large, if it is too serious, it is recommended to replace it. Reason 2
The brake cylinder leaks oil, causing the brake to slip. This requires cleaning the brake pads and replacing the brake cylinders. Reason 3
The brake master cylinder is faulty and this one needs to be replaced.
Note that if it is a new brake pad, it is best to go for a period of time and then inspect it annually. If it is almost close to the qualified data during the annual inspection, then you can increase the weight of the vehicle appropriately or reduce the tire pressure to increase friction and improve the braking force during the re-inspection.
3.Unbalanced brakes. This is mainly because of the problem of uncoordinated work of the brake cylinder, if the data is too far apart, you need to go to the repair shop to clean the brake cylinder. If it's very close to passing, then you can go to the brake disc for the re-inspection.
Or pour a little water into the brake drum, preferably spray a little rust remover.
Maybe you'll be qualified. Be careful not to spray some oily liquid into the brake disc or drum, it will really lose the brakes.
There are many ways to pass the inspection at the inspection station, but the quality of the car's braking performance directly affects driving safety. If the inspection is unqualified during the annual inspection, I hope that all riders will face it correctly. Don't use those not very proper methods to deal with passing the annual inspection, more heart, more security and safety.
-
Then you can only go to the car repair shop to have the brakes checked or the brake pads replaced.
If you don't solve this brake problem, there is no way to pass the annual review.
Therefore, if there is a problem, hurry up to repair it, and then come to inspect the car.
-
Introduction to the unqualified braking measures for the annual inspection of the car: the side with less braking force is deflated, that is, the left tire. If the test line reports that the braking force is unqualified, the vehicle load can be increased appropriately.
-
Adjust the rear brake tighter Repair it Continue to inspect Come back to check and repair it and then go The following two factors should be considered when the brakes are unqualified for the annual inspection: 1. The brake pads of the vehicle.
The grinding is too thin, and the brake pads should be replaced, but they are not replaced in time, and the on-line inspection may lead to unqualified brakes. The solution is very simple, go to the repair shop to replace the brake pads with new ones, and then go online for inspection and you will pass the test smoothly. Hint:
The vehicle should be regularly maintained, brake pads, brake fluid.
It should be replaced regularly. Prevent accidents caused by brake failure. 2. The detection of the front and rear brake system is inconsistent, and the owner who usually drives very carefully always can't bear to step on the brakes, and when the brake system is detected, the front and rear brake systems are inconsistent, resulting in the brake detection is not good.
The solution is also very simple, drive out, speed up on the open road, slam on the brakes a few times, and then re-online detection can be successfully passed. 1. If it is a manipulator.
Brake, the hand brake is connected with the two rear wheel brakes, first of all, you can find a maintenance shop to adjust the handbrake cable, and adjust the brake cable tightly. 2. If the rear wheel of your car is hub brake, you can hang the reverse gear, brake at a certain point during the reversing process, brake at a certain point, and point it several times, so that the hub brake will have an automatic adjustment function, and the hand brake can also be tightened. 3. If it is an electronic parking brake.
It's time to go to a professional 4S shop to adjust. @2019
-
In fact, the inspector doesn't want you to pass! Wants you to spend some money. Let me tell you about my personal experience; "When I inspected the car four years ago, I was told that the handbrake was unqualified, and I thought it was really unqualified, so I repaired it.
There was a repair shop in the yard of the inspection line, so I went over and told the repairman to adjust the handbrake and paid 30 yuan. Then the repairman was ready to adjust the handbrake, but he watched it for a long time.
-
Summary. Hello dear, I'm glad for your question, what should I do if the annual inspection of the car says that the braking rate is unqualified? If the braking rate of the whole vehicle is unqualified, it can be directly deflated to the side with relatively small braking force, or the heavy objects of the vehicle can be appropriately increased on the spot, such as filling up or placing sundries.
What should I do if the annual inspection of the car says that the braking rate is unqualified?
Hello dear, I'm glad for your question, what should I do if the annual inspection of the car says that the braking rate is unqualified? If the braking rate of the whole vehicle is unqualified, it can be directly deflated to the side with relatively small braking force, or the heavy objects of the vehicle can be appropriately increased on the spot, such as filling up or placing sundries.
Extended information: The service braking rate is unqualified because the axle braking performance is not good. The axle braking rate is solved, and the driving braking rate is qualified.
In the process of driving, the service brake (foot brake) is generally used to facilitate deceleration and parking in the process of moving forward. It's not just about keeping the car still. If the service brake fails, use the parking brake.
The main reasons for poor axle braking performance and solutions are as follows:1The brake pads wear too much and the clearance is too large.
You can get a mechanic to adjust the brakes. Generally, there are repair blocks near the testing station, which is not expensive. If it is too severe, it is recommended to replace it.
2.The brake cylinder leaked oil, causing the brake to slip. This requires cleaning the brake pads and replacing the brake cylinders; 3.
The brake master cylinder is faulty and needs to be replaced.
-
1. I found a repair shop, promised to help repair one, but I can pack the ticket to repair, the cost is 50 yuan, no way, I can only try it, I dismantled the thick Zheng Qin drum on both sides and saw it, there is no problem with the sub-pump, and the gap can not be adjusted, and the brake pads are sanded with sandpaper and installed.
2. Put two bags of sand in the trunk and press them on the two rear wheels.
3. Deflated the tires and the tire pressure dropped to the point.
4. Remove the insurance of ABS.
The information to be prepared before the annual inspection of the vehicle is as follows:
1. Driving license and identity travel permit.
2. Deal with vehicle violations and pay off the violations.
3. The insurance company handles the policy of Yanbi traffic compulsory insurance.
4. Bring a tripod.
5. Vehicle fire extinguisher.
There are scalpers in each inspection line, just find scalpers to give some money.
The following materials are required for the motor vehicle inspection:1. Individuals need the original driving license, a copy of the compulsory traffic insurance, a copy of the ID card, and a vehicle; >>>More
Then we have to see where the unqualified urea for this car is unqualified, if it is biuret or insoluble matter in urea, or phosphate, these things are unqualified. Then the damage to the car is that the urea pump burns out, the pipe is blocked, the nozzle is blocked, and the exhaust cylinder is blocked. Then these accessories are blocked, and the only solution is to replace the accessories. >>>More
Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China >>>More
The lights are dim, and the xenon headlights cannot be changed privately. >>>More