Is it good to add Castrol EXTREME 0w 40 fully synthetic engine oil to the FAW Besturn X80 engine

Burning engine oil is absolutely abnormal; The oil is not anti-wear;

Do know the task:, thank you!!

No matter what kind of oil, as long as the anti-wear property is good;

After many cars that burn engine oil use super eutectic lubricating oil, they are pleasantly surprised to find that they no longer burn engine oil, because it is nano anti-wear repair engine oil; Directly approved by the manufacturer;

The wear resistance of the engine oil is not good, and it can be improved a lot by using the super eutectic lubricating oil with good wear resistance;

The general fuel additive is a bottle of 50 ml with 60 liters of gasoline, first fill up the fuel, and then pour it in;

However, I recommend you to use Chaomei brand fuel additives for Sinopec OEM;

The real way is to buy an engine internal cleaning agent produced by Chaomei, pour it into the oil cylinder, idle for ten minutes, and then replace it...

You use poor engine oil, which is not resistant to wear and tear, and soon burns the engine oil, tens of thousands of kilometers; With engine oil with good wear resistance, it is basically difficult to wear, and it will not burn engine oil for life;

Do you still believe in the original? The original one is the most basic qualified; Definitely not the best;

These oils are average, and no one is better than the other; You need to use a good anti-wear oil to protect the car;

Burning engine oil means that the engine oil is not anti-wear, and the wear particles are too large, resulting in poor sealing before burning engine oil;

Use super eutectic lubricating oil with good anti-wear performance to repair the slight burning of engine oil; And it's not expensive;

It is not normal to burn engine oil, either there is a problem with the assembly, or the engine oil is not wear-resistant;

The engine oil used is not good and does not play a role in anti-wear; Wear and carbon deposits are generated, resulting in louder noise;

Remove carbon deposits, enhance power, eliminate exhaust gases, save fuel and reduce fuel consumption.

Use super eutectic lubricating oil, close to zero wear, no oil burning;

It means that the oil quality is not good. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, just use 5w on the line, 0w oil fluidity is too good for your car to fit. Have a great trip! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, the oil is too good, the oil molecules are fine, and not all cars are suitable for what kind of car for you. Hope it helps. If you have any questions, please feel free to ask.

Thank you for your support to Auto Master, your support is our motivation . Have a great trip! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Castrol EDGE belongs to three types of fully synthetic engine oil, the performance is good, but the anti-wear ability is average, I have used the best anti-wear engine oil, is the magic red engine oil I use now, the PAO base oil content is also very high, plus the perfect match with liquid molybdenum, so that the anti-wear performance of the magic red engine oil is very good, the actual use of power is very sufficient, the performance is much better than the three types of fully synthetic engine oil.

It is a fully synthetic engine oil, I have used it in my own car, it is not bad, and the noise is quite small. How about the anti-wear ability, this is not easy to say, because you can't see or touch, just by feeling, it is difficult to say clearly, as long as the oil is not fake, the label is selected, and there is no problem with it.

I forgot to say, BMW's designated oil is Castrol, because Castrol got the BMW standard, just like KFC sells Coca-Cola, McDonald's sells Pepsi (I don't remember the words of confusion), theoretically speaking, there is no engine to pick the brand, only pick the level of engine oil, because no matter which manufacturer for the production of cars, the production of engine oil is the corresponding national standard, as long as it is a qualified national standard, there is no big difference in use, my unit also to Jinbei supporting the production of loading oil and after-sales maintenance oil, But it's not that Jinbei car owners don't use other brands of oil, it's just that the manufacturer recommends using matching oil, because there is a relationship of interest, understand? I'm not saying this to say that Castrol can't be used, my consciousness is that there is no need to spend **.

It is recommended that if you have not changed the oil for half a year, you should change it, I use Jin Mobil, because my dad uses other oil to burn the oil, and I use Jin Mobil not to burn (A4 B6), as for the daily run is very little and very short, it is recommended to run high speed every month, the battery should be fine, my family 06 years of 320 has not changed the battery until now, frequent start to the engine wear and tear is the greatest, but if you have to run a short distance there is no way, the car is used.

Hehe, I used to run the Castrol business, so it's pretty clear

Can fully synthetic oil last for half a year or a year? Why everyone says it differently.

Also, do you think it is necessary to use Castrol engine cleaning fluid to clean the new engine oil before pouring the new engine oil into the ???

Even if the same brand is not recommended to mix, because the difference between the two labels is too much, the temperature scale gap between 15w and 5w can be said to be very large, one of the shoe additives will not be the same, the viscosity of the two labels is not the same, after mixing, it is impossible to predict what kind of viscosity coefficient oil will be produced, it will not be good for the engine, so it is not recommended to mix the oil.

It will be more comfortable, but if you want to add money to the 4S store, it is not necessary, it is too expensive. I changed it in the repair shop with my own fully synthetic engine oil, and the 0W40 of GT Magic Red is much quieter than the 5W40 of Jihu before, and the power is also strong. When I first maintained it myself, it was more comfortable to use Jihu than the original, but I ran more kilometers a year, and Jihu 7000 kilometers was not as convenient as GT Magic Red 12000 kilometers.

Anyway, it doesn't matter if you use the engine oil well, it's cheaper than in a 4S shop.

"Dream of Red Mansions" film and television drama versions of Lin Daiyu (2 photos).

Hello, the same brand, the same model, can be mixed, different brands of additives are different, can not be mixed! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Even if the same brand is not recommended to mix, because the difference between the two labels is too much, the temperature scale gap between 15w and 5w can be said to be very large, one of the shoe additives will not be the same, the viscosity of the two labels is not the same, after mixing, it is impossible to predict what kind of viscosity coefficient oil will be produced, it will not be good for the engine, so it is not recommended to mix the oil.

Adapted from the original chapter of the same name.

The same brand can be Different brands are not recommended to be mixed [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

1. The viscosity is different: the numbers 40 and 30 after 5w represent the viscosity, the larger the number, the greater the viscosity, and the higher the applicable maximum temperature.

2. Different applicable environments: 5w40 can adapt to higher temperature environments than 5w30, and high-viscosity engine oil (with higher values) may also be more suitable for high-speed driving or heavy-duty vehicles.

3. The lowest temperature to withstand is different: the smaller the number before W, the smaller the low temperature viscosity, the better the low temperature fluidity, and the lower the applicable minimum temperature; Using the oil with a lower value in front of the w, it is easier to start the engine in cold weather, mainly depending on the environment in which the vehicle is driving, if it is in a hot area such as Hainan, China, it is better to use 5w40, if not, it is better to use 5w30.

Castrol GILT's 5W30 and 5W40 engine oils are fully synthetic motor oils, and there is not much difference in performance, mainly in terms of viscosity grade, the low temperature viscosity value is the same as 5W, which means that it can be used in environments with a minimum temperature of minus 30, both have excellent low temperature fluidity, and have excellent cold start performance.

The difference is that the high temperature stability of 5w40 is stronger, while the viscosity of 5w30 is lower than that of 5w40, which is more suitable for new cars and new engines, while 5w40 is more suitable for old cars, because its higher viscosity value can increase the sealing line and prevent burning oil.

As for which is better, 0w40 and 5w40 are better, compared with the two, the low temperature fluidity of 0w40 is better than that of 5w40, and the minimum temperature applicable is different, the minimum temperature that 0w can be applied to is minus 35 degrees Celsius, and 5w is minus 30, but in fact, there is no accurate answer to this question, it may be better for a certain part of the people 0w40, and for another part of the people, it is better for 5w40.

So if you want to say which one is better, it is better to say which one is more suitable, and the one that suits you is the best one.

When choosing engine oil, the most important thing is to choose a lubricating oil with a viscosity grade suitable for your vehicle, so that it can really play the functions of lubrication, cleaning, fuel saving, etc., and the viscosity selection is not good, not only wastes the oil, but also causes certain damage to the engine.

Answer Autumn is high and cool, the mountains are red all over, in this fruitful golden autumn, I wish you wealth like autumn rain, love like autumn water, troubles drifting away with the autumn wind, career as mature as autumn fruits, and a clear mood like the autumn moon.

0w40 oil is helpful for cold starts, but in addition to being resistant to low temperatures, 0w40 oil is also higher in quality than 5w40 oil.

Question: Can I change the 5-30 that I have been using for 0-40?

Can I change the 5-30 I have been using for the 0-40 one?

Asking questions has no effect on engine dynamics.

It doesn't affect the engine dynamics.

Ask what is the difference between the ratio and the 5-30 ratio.

What is the difference with the ratio of 5-30.

Asking other questions doesn't make a difference, right?

Nothing else, right?

Ask a question, okay, thank you.

Ok thanks.

The viscosity is different.

The oil label consists of two parts: grading and viscosity specification.

The oil classification is indicated using a two-letter combination. The series starting with "S" represents gasoline engine oil, the general specifications are from SA to SN (in alphabetical order, but there is no SI in it), each letter increment, the performance of the oil will be better than the previous one, and there will be more additives in the oil to protect the engine; The lower the letter, the higher the quality grade, and most of the oil grades in international brands are above the SF grade. The series starting with "C" represents diesel engine oils.

If the letters "S" and "C" are present at the same time, it means that the oil is a general purpose type of gasoline and diesel.

The oil designation usually indicates viscosity and quality. The specific interpretation is as follows: the viscosity of lubricating oil is mostly marked by SAE and other grades, and SAE is the abbreviation of the English "Society of Automotive Engineers".

w stands for winter (winter), the more ** the number in front of it, the better the low temperature fluidity of the engine oil, the lower the ambient temperature available for use, and the better the protection ability of the engine during cold start; The number after the "W" (after a horizontal line) is an indicator of the high temperature resistance of the engine oil, and the higher the value, the better the protection performance of the engine oil at high temperatures.

The label after the classification of the engine oil indicates its viscosity specifications, for example, in "15w w-40", "w" means winter (winter), the more ** the number in front of it, the better the low temperature fluidity of the engine oil, the lower the ambient temperature available for use, and the better the protection ability of the engine during cold start, such as 5w represents the external low temperature resistance -30 °C, and the 20w low temperature resistance is -15 °, and the number behind the 20w low temperature resistance is -15 ° represents the kinematic viscosity of the oil at 100, the higher the value, the higher the viscosity. 40 represents 100 degrees Celsius, and the kinematic viscosity standard is between to, which is definitely not what some people say can be used below 40.

The viscosity is different, learn the common sense of engine oil, which is introduced in our altar.

Ask the master, now out of the **Castrol Extreme Protection Sport Edge Sport 5W30 fully synthetic engine oil has anyone who has used, talk about the use of feelings, in addition, the technical indicators of this oil, who has seen it.