How to adjust the water temperature gauge of FAW Volkswagen Suteng engine?

The Volkswagen Sutar does not have a water temperature gauge, but replaces it with a water temperature warning light.

1. When the motor is working normally, it will produce a very high temperature, and then the cooling system will play a role to keep it within the normal working temperature range. When the water temperature is too high, it will accelerate the wear of the piston, deform the cylinder head and cylinder block, and even easily cause damage to the engine; When the water temperature is too low, it will make the oil and gas mixed combustion in the engine insufficient, accelerate the wear of gears and other components, and at the same time, a large amount of carbon will be generated, and the emissions will also exceed the standard.

2. If the water temperature is too high, the reason is that there is less coolant, this situation is likely to be that the owner usually does not care about forgetting to add it in time, and special attention should be paid to the fact that the owner must choose the same brand and model of product when adding coolant, otherwise it may cause chemical reaction due to different components and cause antifreeze failure. In addition, it may be that the leak has caused the coolant to become less, and the owner should carefully check whether there is a leak and repair it in time.

First find the water pipe of the car, and then cut the opening in a suitable position, the length should be close to the length of the tee. In this way, the tee can be loaded into the water hose and secured with a latch, while the sensor head can be screwed on the small opening, and finally the step can be finished by applying sealant to the gap.

The owner also has to wear the line of the water temperature gauge from the left part of the driver's seat to the engine compartment and connect with the sensor, and the line of the water temperature gauge is connected to the line in the middle of the cigarette lighter and the other two respectively, so that it can form a loop, and the owner can automatically cut off the power after pulling out the key, which is very convenient.

Suteng does not have a water temperature gauge and can install a water temperature gauge by itself. First of all, it is best for the owner to find the water pipe of the car first, the general position is obvious, the owner can easily see it, and then cut the opening in the appropriate position, and the length is best close to the length of the tee. In this way, the tee can be loaded into the water hose and secured with a latch, while the sensor head can be screwed on the small opening, and finally the step can be finished by applying sealant to the gap.

Then, the owner also has to wear the line of the water temperature gauge from the left part of the driver's seat to the engine compartment and connect with the sensor, and the line of the water temperature gauge is connected to the line in the middle of the cigarette lighter and the other two respectively, so that it can form a loop, and the owner can automatically cut off the power after pulling out the key, which is very convenient.

At this point, the installation of the car water temperature gauge is done, but the car owner in the car after the installation of the car water temperature gauge, the early stage of the first time to observe the mechanical working state, if the temperature to about 99 degrees then the electronic fan is not started, the owner quickly turned off the engine to open the cover of the machine to rest for a while, and wait for a buffer time.

1. Press the set button in the left button area of the Sutar multi-function steering wheel.

2. Press the upper arrow button in the right button area of the steering wheel of the multi-head function for 2 times.

3. Press the OK button on the right side of the multi-function steering wheel once.

Fourth, press the right down arrow sock scale button once.

5. Press the OK button in the right button area of the multi-function steering wheel once.

Sixth, this is a meter display digital water temperature meter.

Water temperature warning light, indicating that the water temperature is too high.

The water temperature indicator is used to display the temperature of the coolant in the engine of the vehicle, and the color is mainly yellow. Under normal circumstances, when the key is twisted, the water temperature indicator will light up when the vehicle is self-checked, and the indicator will automatically turn off when the car is started. If the indicator light is solid after starting the car, it means that the coolant temperature exceeds the specified value.

The water temperature alarm light is on and needs to be dealt with in time, the water temperature of the vehicle is too high, and it is necessary to find professional maintenance personnel to check it to see what problem causes the water temperature of the engine to be too high, and at the same time to repair. If the water temperature light alarms, do not continue to drive to avoid damage to the engine due to excessive engine temperature.

The water temperature gauge of the new Sutar is located in a small circle below the speedometer. A thermometer is an instrument that uses different principles to measure the temperature or temperature gradient of an object (or space). Common are analog bimetal thermometers with dials that allow direct measurement of gases, liquids, and vapors.

It is widely used in machinery, shipbuilding, petrochemical, metallurgy, electric power, light industry and research and other departments.

Since its introduction to the Chinese market in 2006, the Suteng brand has become the market benchmark for China's A+ class sedans with its original German bloodline, exquisite manufacturing technology, class-leading scientific and technological equipment, and cumulative sales of more than 1.3 million.

The location of the arrow in the diagram is the water temperature gauge.

Automobile engine needs a certain working temperature when normal operation, too high or too low is not conducive to the normal operation and performance of the engine, on the other hand, the heat generated by the engine is difficult to meet the demand of conventional air cooling, so the automobile engine widely adopts the water-cooled thermal conduction design. The role of the cooling system is to keep the engine working in the most favorable temperature range to increase the power of the engine, reduce engine wear and fuel consumption. Temperatures that are too high or too low can adversely affect the operation of the engine.

Hello, the new Sutar only has a mechanical water temperature gauge on the above models, the model does not have a water temperature gauge, only a warning light, once the water temperature is too high, the computer will alarm.

The small meter below the tachometer (the big one on the left) is the 90 scale directly above it, which is also the optimal water temperature for the vehicle, which varies depending on the season.

This should be right under your dashboard.

Volkswagen Suteng water thermometer in the lower area of the dashboard mold Zheng Mao tachometer (as shown in the figure). To ensure that the engine is operating within the normal temperature range, the car is equipped with an engine coolant temperature sensor, which will generate a plex alarm if the antifreeze temperature is too high. In general, the engine water temperature gauge uses a physical or virtual dial pointer, while a few vehicles do not have a dashboard and only have a warning sign when the temperature is too high.

The engine coolant temperature is not as low as possible, nor is it as high as possible, it needs to be within a certain range, and the normal temperature is ** 90 °C of the pointer. After the vehicle starts, the temperature of the antifreeze rises rapidly, and the temperature of the heat exchange balance antifreeze does not rise after the pointer reaches the first position, and generally speaking, the temperature reaches the middle position when the start is the best, which is one of the reasons why the vehicle should be heated up before starting.

Volkswagen Suteng water temperature gauge is on the left side of the dashboard, and there is a temperature and hunger meter to see. The water temperature gauge is to display the coolant temperature, which is convenient for the owner to understand the condition of the car. When the water temperature of the car is too high, the owner needs to stop and rest, wait for the water temperature of the vehicle to drop to the normal temperature, and then continue driving.

Here are the reasons why the water temperature gauge doesn't move:

1. The power cord of the water temperature meter is disconnected; The electric ring of the water temperature gauge is burned out;

2. The electric ring of the water temperature gauge sensor is burned out or the contact contact is poor;

3. Poor wiring or open circuit of the water temperature gauge sensor wire;

4. The voltage regulator that supplies a stable power supply to the water temperature gauge circuit is damaged.