Win10 headset speaks without sound

It's possible that your volume isn't turned on, or that the hole is plugged in incorrectly.

So it needs to be checked.

In the case of speaking without a voice, it should be caused by the problem of the headset.

Hello, it may not be connected well. Just reconnect it and you're good to go.

If there is no sound from your headphone microphone, it may be that it is not connected well, so in this case, you must reconnect it in time.

Microsoft's operating system headset does not speak sound, which may be caused by your height not supporting the headset.

Day 200 didn't speak, and if there was no sound, you can adjust the sound, just turn it up.

If you can't hit the i10 headset and there is no sound when you speak, it means that the connection cable in the middle of it is broken.

There is no sound when the headset speaks, it must be that there is something wrong with his interior, you can check it with a maintenance person.

It may be because something is wrong, it is recommended to go to the shop to have a look and repair it as soon as possible.

Well, if you don't finish speaking, you can see if the deal is damaged, and then if it's not locked, it's still being checked, is it that the voice is not opened? Both cases.

If it's that headset and there is no sound when speaking, it's likely that the headset is damaged, or that the sound is turned on.

If Wen's headset speaks without a sound, it's because its socket isn't plugged in, right?

You may need to set it in the volume controller.

The microphone and the headset are not the same wire, and the headphones with the microphone are both two plugs, one is the headset and the other is the microphone.

The microphone speaks without sound, perhaps because there is a problem with your headphones, or because you have a problem with your connection.

The Wi N 10 headset does not speak, which may be caused by your lack of debugging.

We don't speak sound, maybe you forgot to turn on the phone so slowly, it's best to go to the settings to check carefully.

Win10 can't use the headset to speak, maybe the microphone is disabled, restart the microphone and it's fine. The specific steps are as follows.

1. Find the control panel on your computer's desktop.

2. Click to enter to find the hardware and sound.

3. Click Manage Audio Devices.

4. Click Record, as shown in the figure below, the microphone is disabled.

5. Right-click and select Enable.

6. As shown in the figure below, the microphone is turned on, and you can use the microphone to speak.

How to set it up:

1. Click "Start", "Control Panel", and "Sound".

2. Switch to the "Recording" tab and see if the microphone is set as the default device.

3. Set the microphone: Right-click the speaker icon in the lower right corner of the taskbar, and select "Recording Device" from the pop-up shortcut menu.

4. Enter the "Sound" dialog box, switch to the "Recording" tab, and directly double-click the "Microphone" option or right-click the "Properties" command.

5. Switch to the "Level" tab, turn up the volume of "Microphone" and "Microphone Boost", and click the "OK" button to make the settings take effect.

6. Turn off microphone sound effects: switch to the "Enhance" tab in the "Microphone Properties" window, then check the "Disable all sound effects" checkbox, and finally click "OK" to save the modifications.

7. Set up in the Audio Manager: Go to the "Control Panel" and click to open the "Audio Manager".

8. Switch to the "Microphone" tab and select the "Noise Suppression" and "Echo Cancellation" functions under the "Microphone Effect" option.

Win0 system is an excellent system based on the core, but it is inevitable that there will be some problems in the process of long-term use, for example, some friends have recently encountered the situation that there is no sound when using headphones for games or audio chats, which affects their own use experience, so what should we do about this? The following article will share with you how to deal with win10 headset without sound.

Here's how to deal with it:1. First of all, check whether the headset is in contact with the problem.

2. If the contact is good, check the lower ear to prepare the microphone to see if it is damaged;

3. In order to ensure that the equipment is in good condition, you need to set up the computer, first open the "sound" in the "control panel";

4. Click "Record", we see that the recording device is turned off;

5. Right-click "Microphone" and select "Enable".

Recently, when many users use the microphone, they find that there is no sound. Generally speaking, there is a problem with the empty driver, and it is okay to update the driver, if not, you can check the device, let's take a look at the solution.

Microphone Usage FAQs].

Workaround for win10 microphone no sound.

Some laptop friends who use win10 system said that the microphone of the notebook speaks without sound, what is the situation? It may be that there is a certain problem with the driver, so let's take a look at the specific solution.

Microphone use frequently asked questions].

win10 notebook microphone speaking no sound solution.

1. First of all, we need to make sure that the computer has sound card hardware, right-click on my computer, select Management, and select Device Management in the pop-up option box, as shown in the following figure or rotten to see if there is a sound option.

2. Then we need to determine whether the driver is in good condition, the above figure indicates that the driver is normal, if you have an external voice device under the voice bar in the device manager, it will still be displayed that the driver is abnormal, it will be displayed as follows, there will be a yellow exclamation mark in front of the name of the sound card.

4. In the case of making sure that the drivers are normal, the microphone is still not available, we can right-click on the small speaker at the bottom of the screen, select the sound option and then select the recording option, and see if the following device is disabled.

5. If you make sure that the hardware, driver and sound options are normal and correctly configured, and your computer is a window10 system, please click on the window logo, select the privacy settings, select the microphone option, and check whether the switch and function are on. If this option is the result, just restart the app.