0x00000050 0xe7eb96b6, 0x00000000, 0xefd61dfc, 0x00000002 What is the mistake Please help you to see

It has no effect on the computer or appears [occasionally], leave it alone, it may disappear automatically after [restarting the computer].

Pirated systems or ghost version systems, system file errors or missing, the problem will also occur, install the official patch in time,. Suggestion: Install the [Genuine] system.

Check whether there is a problem with the driver, reinstall the driver, or update the driver in time.

Hardware-induced:

1) It may be a small problem with the memory module, shut down the power off, remove the memory module, clean it up and reinstall it. Replace memory modules if necessary. (This issue generally does not occur on hardware).

Software-induced:

1) If the installed software conflicts with the system or other software, pirated or virus-based software, please be cautious ** software, it is best to use genuine software. [The main thing here is to check the boot startup items, and prohibit the boot items that are not necessary to start from booting].

2) If you have two or more similar software installed on your computer, such as two anti-virus software, two optimization system software, etc., please uninstall one to avoid conflicts and maintain the stability of your computer.

3) Some system patches** have the wrong patch installed, which may conflict with your current system or other software, and this issue can also occur. Uninstall the patch, find the one that works for your computer, and reinstall it.

0x0000007b

Error Analysis: Windows is unable to access the system partition or boot volume during the boot process. It usually occurs when the motherboard is booted for the first time after the motherboard is replaced, mainly because the IDE controller of the new motherboard and the old motherboard use different chipsets.

Sometimes it can also be caused by viruses or hard drive damage.

Solution: Generally, you only need to boot the computer with the installation CD and then perform the repair installation to solve the problem. For viruses, you can use the DOS version of the antivirus software to detect and kill (the main battle has KV2005DOS version**).

If there is a problem with the hard drive itself, install it on another computer and use it"chkdsk /r"to check and fix disk errors.

Hello bosom friend!

0x0000008e (equivalent to the modern blue screen representation bccode: 1000008e).

Possible causes of this error may include: (Microsoft explained) (xyz5819 Ideation Spacetime).

1.The hard drive is damaged.

2.Hardware configuration issues.

3.Incompatible software.

4.Incompatible drivers.

5.There is a virus in the operating system.

6.The memory module does not match or is corrupted. (xyz5819 Mind Spacetime).

Error Name 0x0000008e: Kernel Mode Exception Not Handled (xyz5819 Idea Spacetime).

Failure Analysis 0x0000008e error indicates that the kernel program is experiencing a problem, but the Windows Error Processor is unable to accurately capture the error type. There are many possible causes for this error, and it is generally troublesome to encounter this error. If you encounter 0x0000008e error, it is recommended to check the complete BSOD failure prompt to see if there is any mention of which file is causing the error, if you see the file name of an application software or a hardware device driver in the BSOD fault prompt, the problem is generally related to the corresponding application software or hardware device; If the file name causing the error is not displayed in the BSOD fault prompt, you usually need to determine the cause of the fault based on other fault information, and it is recommended to check the Windows Event Viewer to see if there is a corresponding record.

(xyz5819 Mind Spacetime).

0x0000008e:kernel mode exception not handled (xyz5819 ideation space-time).

Error Analysis: A kernel-level application produces an error, but the Windows Error Processor doesn't catch it. It's usually a hardware compatibility error. (xyz5819 Mind Spacetime).

Solution: Upgrade the driver or upgrade the BIOS(xyz5819 Mind Spacetime).

If there is a memory problem, wipe the memory insurance and replace it.

The memory is in conflict with that hardware.

Hello: Many netizens appear blue screen (0x00390b67 the 0x80391510 memory quoted by the instruction can not be read) problem, summed up the following solutions, see what is the problem of your computer below, only the right medicine to ask the accompanying question can be solved. There are several main aspects to this problem:

1.If you use a pirated system, there is a possibility that such a problem will occur, it is recommended: use the genuine version.

2.If it doesn't affect your computer or happens occasionally, leave it alone, and restart your computer to disappear automatically.

3.If it is caused by a virus, upgrade the anti-virus software to completely disinfect the computer.

4.The hardware is mainly caused by incompatible memory modules, and the memory should be replaced if necessary.

5.If the system or its upbeat software is caused by it, check whether the computer year, month, and day are correct.

6.If the driver is unstable, reinstall or update the driver in time. At the same time, using Optimizer, 360, and Master Lu to clean up junk files will also cause this problem.

8.If you use IE8, after patching, many netizens report that it is not very stable. The easiest solution is to switch to a different browser. For example: 360 Secure Browser, Window of the World Browser, Maxthon, etc.

9.If there is a problem with the system itself, install the official patches in time and reinstall the system if necessary.

10.Problems with a certain software, here are mainly to look at the software running at boot, use 360 and so on to check the software running on boot, and remove the software that runs unnecessarily.

11.Software conflicts, uninstall the problematic software. (For example, if it occurs during installation or runtime, it can only be resolved if it is upgraded, patched, replaced with another version, or uninstalled.)

12.The following solution can be tried: if it doesn't work, the only way to do it is to restore or reinstall the system.

13.Trial command exclusion.

Start Run Enter cmd -- Enter, and enter the following command in the command prompt.

for %1 in (%windir%\system32\*.dll) do s %1 enter.

When you're done, underneath the input.

for %i in (%windir%\system32\*.ocx) do s %i carriage return.

If you are afraid of typing mistakes, you can copy these two commands, then right-click the mouse button after the command prompt, hit "paste", press enter, and wait patiently until the screen scrolling stops. Restart your computer.

14.Run regedit into the registry, under hkey local machine software, microsoft windows, currentversion, explorer, shellexecutehooks, there should only be one normal key, and delete the rest. [If there is another (default) leave it alone, it is usually empty.]

If you have any questions, please refer to them.

Friends who copy this answer, please respect yourself!!