How to clean up iOS speaker vibration dust removal audio?

<> mobile phone speaker dust removal is relatively simple, through the vibration of the audio can be. It is based on the principle of exchanging frequencies between 100 and 550Hz to vibrate the speaker of the mobile phoneAchieve the effect of ash cleaning.

Let's share it with you. For convenience, they are numbered accordingly.

We click on the corresponding red circle 1 on the phone

Then click on the corresponding red circle 2 and red circle 3 respectively here

Then write those 4 words in the red circle 4 and then OK. Then let's click on the red circle 5 to go to it, which is the dust removal audio.

Same as this one, it's this 899. It's Arab.

Digital. Back to these three Arabs, that is, 899, there will be a **. Click on that** to get the dusting audio.

Now it's time for the audio, click Clean Now to clean the speaker dust for free. Remember to turn the volume up to 80% before cleaning, no more or less. 80% is the best state of audio cleanup.

Generally speaking, if your mobile phone speaker has a noise, it can't be solved by dust removal alone, it may be that there is iron cutting inside, which can often only be solved by changing the speaker.

Hello landlord, if this kind of speaker needs to be cleaned, it generally does not need to be cleaned separately, just brush it with a small brush.

The principle of iPhone speaker dust cleaning is mainly achieved by using the principle of sonic vibration, which can effectively shake off the dust and dirt outside the speaker through vibration, and it is recommended to use a toothbrush to clean it

This storage method of horn vibration is actually for some simple dust, if you need some stubbornness, you may need to use wet wipes, alcohol, etc.

You can buy something special to clear the audio, to clear the audio, never wipe it with water.

It's best not to clean it yourself, it's best to guide this kind of maintenance point there for static pressure cleaning, this ** is still very cheap, so overall it's still very good.

ios, this speaker vibration is divided into audio, this is cleaned, this is the automatic vibration of people, remove the dust inside.

This should go to a special mobile phone store and let him help that brother, this matter is difficult to clean up.

I think if there is this audio, you can clean it up directly from the official.

Well, if you clean up the speaker Zheng Dong, you can set it up in that web page.

This daddy's impulsive sincerity how to get to your heart is very easy and very many ways to clean up.

How to clean up the audio of iOS speaker vibration dust removal? How to clean up some specific aspects depends on what some types of it look like.

How to clean the dust of the speaker on the iPhone.

1. Take Apple iPhone 8

For example, use a toothpick with double-sided tape.

Wrap compacted, and then gently glue the dust from the mesh outside the horn to remove it;

2. Use a fine-bristled toothbrush, gently brush the earphone jack and charging port, and then use a hair dryer to blow clean the surface with dust;

3. In the case of a complete shutdown, wipe the bell mouth with a cotton swab dipped in alcohol, and then turn on the machine after the alcohol volatilizes.

Vibration as much as possible and use the vibration to clean the speaker.

There are four ways to clean up the horn dirt problem:

1. Toothbrush cleaning method.

Use a toothbrush (preferably soft-bristled) dipped in alcohol at home, clean the place where the iPhone is placed outside, and then use a paper towel to wipe off the dust.

2. Use double-sided tape cleaning method.

Buy a roll of double-sided tape with strong adhesive properties, pull a piece of double-sided tape with the same length as the iphone, paste it to the outside, press the double-sided tape vigorously so that the double-sided tape can contact the speaker inside, and then remove the double-sided tape.

3. Interview cleaning method.

Use a household cotton swab, dip it in a little alcohol, then use one end of the cotton swab to wipe the outer place, wipe it several times until there is dust flowing out of it, wipe it off with a paper towel, and finally use a hair dryer to dry the alcohol remaining in the outer place.

4. You can use chewing gum to stick the dust on the speaker of the mobile phone, (chewing gum of poor quality), soften the chewing gum, stand outside the place, wait for a while, and remove the chewing gum.

5. The hands-on ability is not strong, and it will be sent back to the mobile phone store for processing.

You can find some professional mobile phone stores to remove the external speaker part and clean it professionally, or clean up the dust at the mobile phone speaker, or use a magnetic magnet to clean up the dust with iron metal properties at the mobile phone speaker.

Method 1: Squeeze the cotton swab dry after dipping it in alcohol, and then gently wipe the dusty area. If you encounter a dead corner that you can't wipe in, gently scrape it with a pin, and then wipe it with a cotton swab.

Method 2: Use a dry toothbrush, cotton swab and other tools to remove the cracks and holes of the phone.

Method 3: Use a hair dryer cold air bracket, mini vacuum cleaner and other tools to blow soot cleaning.

Method 4: Use leftover chewing gum and gently press it to stick the dust out.

Method 5: Pay attention to clean up the dust, do not take sharp objects, and poke the dust on the microphone or speaker.

Tools Ingredients: Appropriate amount of alcohol, a cotton swab, a toothpick, and an iPhone.

1. Start by preparing all the tools you want to use.

2. Then take a part of the cotton in the cotton swab and fix it on the toothpick.

3. Then glue the cotton with an appropriate amount of alcohol.

4. Then use a toothpick to clean the dust on the earpiece and speaker.

5. Finally, put the cleaned mobile phone in a cool place or use a hair dryer to blow dry.

How to clean the dust of the Apple phone speaker.

The sound speaker of the Apple mobile phone has entered the dust, and this method is simple and quick to clean up.

Mobile phone speaker dust removal is relatively simple, and the purpose can be achieved through vibrating audio. Its principle is to clean the mobile phone horn through sound wave vibration. At present, the iOS system does not have its own speaker vibration dust removal function, and users can use the relevant WeChat applet or third-party applications to vibrate and dust removal.

It is also a good way to manually remove the horn dust, prepare a dry toothbrush or cotton swab and other tools to pick and clean the horn holes of the mobile phone, and pay attention not to use too much force when cleaning.

You can also directly turn on the iPhone maximum volume**** to shake out the dust in the speaker hole, which is also a way to clean up the dust in the iPhone speaker hole.

You can also use a hair dryer to open a wind shield at will, and aim the tail of the hair dryer (that is, the end of the inhalation) at the speaker hole of the iPhone, so that Lao Hu can suck out the dust in the speaker hole.

Operating environment

Brand vertical ridge model: iphone12

System Version:

Try the cleanup method below:

1. Start by gently brushing the speaker outside your phone with a soft toothbrush.

Then use a hair dryer to blow away the dust.

2. Tear off a piece of tape or double-sided tape, stick the tape or double-sided tape on the outside of the speaker, delicate and smooth, and then gently press the tape or double-sided tape with a toothpick to tear off the fine dust stuck to the outside.

3. Wipe the cotton swab with a small amount of alcohol. Wipe the speaker with an alcohol-based cotton swab.

4. You can find some professional mobile phone stores to remove the speaker part and clean it professionally, or clean the dust on the mobile phone speaker, or you can use a magnet to remove the dust with ferrous metal properties on the mobile phone speaker.

The speaker of Apple devices is one of the parts that we often come into contact with in our daily use, but long-term use will cause dust to accumulate inside the speaker, affecting the sound effect. Apple speaker vibration to clean up dust is a simple and effective way to clean up the macro, this article will introduce the steps and precautions of the method in detail.

Steps. The steps to clean up the dust by vibrating the apple horn are as follows:

Place the device with the back side down on a flat surface.

Tap your finger on the back of the device, as close to the horn as possible.

Heavy Dry Hui repeatedly struck it several times until the dust inside the horn vibrated and fell.

Test the sound of the speaker and repeat the above steps if necessary.

Precautions sail answer.

When cleaning up dust with apple speaker vibration, you need to pay attention to the following:

Do not tap too hard to avoid damaging the device.

Do not use sharp objects on the device for cleaning to avoid scratching the surface of the device.

Pay attention to environmental hygiene when cleaning to avoid dust from entering the inside of the horn again.

If the sound effect of the speaker is still not good after cleaning, it is recommended to go to the Apple after-sales service center for repair.

Apple speaker vibration to clean up dust is a simple and effective way to clean up, but you need to pay attention to the use method and precautions. In daily use, we should pay attention to the cleaning and maintenance of the equipment to avoid dust and dirt affecting the service life and effect of the equipment.