How to install the water tank for pig farms? How do I connect the spout to the pigsty? How to automa

1. A float valve can be installed between the water storage tank (pool) and the pipeline of the water pipe to realize the function of automatic water filling. The following picture is a simple installation drawing, the left side is the water supply end, the main switch, the water storage tank (pool), and the right side is composed of water pump feed water and check valve.

2. The float valve is a valve composed of crank arm and float ball, which can be used to automatically control the liquid level of the water tower or pool. As shown in the picture above, the yellow sphere in the pool is the float. How it works:

When the water pump on the right side sends water to the pigsty, when the water level of the water tank is low, the float decreases with the water level, and the piston in the valve body is driven to pull out by the connecting rod that fixes the float, so that there is no space between the valve body and the piston, and the tap water can enter the water tank; When the water level of the water tank reaches the set height position, the force generated by the float with the rise of the water level pushes the piston in the valve body to the valve body through the connecting rod, because the top end of the piston is provided with a sealing rubber gasket, the water outlet in the valve body is processed relatively flat and smooth, when the buoyancy of the float exceeds the tap water pressure, the piston that is installed with the sealing rubber gasket and the water outlet in the valve body are tightly sealed by the top, and the tap water is also closed by the float valve.

When the float is full of water, it generates buoyancy to make it rise, it will close the valve to stop the water supply, and after the water level drops, the float falls, the valve opens due to the action of the spring, and the water enters until the float is buoyant by the water and rises, and the valve is closed before the water is closed.

3. Float level switch, remote control float valve and other devices can also be used to realize the function of automatic water addition, but the principle is similar to that of float valve.

Tower-free water supply pressure tank, PCR pipe connection, installation of a dosing device.

Float valve for automatic water feeding, you can buy an aluminum alloy water tower, simple and trouble-free, find a professional person to do it.

Look at the daily water consumption of each pig and multiply it by the number of pigs raised (water consumption includes edible water, clean water, and a certain margin should be added considering the water supply capacity of the water source).

3. All adult boars, empty pregnant sows, and lactating sows are 600mm; suckling piglets 120mm; nursery pig 280mm; Grow fattening pigs 380mm.

When the number of pigs is greater than 10, 2 drinking fountains are installed in each pen, and high and low collocation is conducive to the drinking water of pigs.

The water source can be underground water source and tap water, and the water quality meets the requirements of NY 5027. The water supply of the pig house can be a high-pressure tower or tower-free water supply system, and the water supply pressure meets the requirements of GB T.

There is no optimal size for the height of the drinker from the ground, because the height and size of the pigs are different, the fattening circle can be set up with two different nozzles of different heights, and the sow pen can also be different for each circle, in short, you had better go to the nearby pig farm to investigate. Self-restraint.

Suckling piglets 15--25cm nursery piglets 25-30cm growing pigs, fattening pigs 50-60cm pregnant sows, lactating sows, boars 75-85cm nursery piglets It is recommended to get three drinking fosters, two 25-30cm, one 15-25cm.