What is the process formula of silica gel decolorization sand, who knows? Thank you

Hello, the raw materials for the production of silica gel are water glass and quartz sand, and the methods are not the same, at present, the silica gel decolorization sand is only used as the scraps of silica gel, so the amount is not large.

Beijing Huanyu Kexing Science and Technology Development Center is mainly engaged in oil refining catalysts, diesel decolorization sand, and oil refining equipment.

1.National standard diesel, non-standard diesel:

a.Sinopec national standard diesel.

b.High-density PE plastic oil.

c.Yanshan petrochemical tower bottom oil.

d.Low-density plastic oil (pulp pyrolysis).

2.Refining catalysts:

a.Catalytic cracking catalysts.

b.Pour point depressant catalyst.

c.Desulfurization catalysts.

d.Deodorization catalyst.

e.Adsorption purification catalyst.

f.Viscosity reduction catalysts.

g.Prevent ash catalysts.

h.Catalysts for specific gravity reduction.

i.Catalyst for oil refining of spent engine oil.

j.Catalyst for refining waste plastics.

k.Catalyst for refining waste tires.

l.Wax oil refining catalyst.

m.Residue refining catalyst.

n.Heavy oil refining catalyst.

o.Coal tar refining catalyst.

3.Oil refining equipment, equipment optimization:

a.50-300 tons of ** oil refining equipment per day.

b.Daily output of 50-300 tons of waste engine oil refining equipment.

c.Daily output of 50-300 tons of waste tire refining equipment.

d.5 tons of waste plastic oil refining equipment per day.

e.Fabrication and optimization of oil refining catalytic towers.

f.Optimization of the decolorization process.

g.Refining equipment improvements.

4.Petrochemical:

a.Diesel decolorization sand.

b.Diesel decolorizer.

c.Coal tar decolorization sand.

d.Corrosion inhibitors.

e.Metal passivators.

f.Flash point raiser.

g.Cetane number improver.

Beijing Huanyu Kexing Science and Technology Development Center has high-quality product quality and broad market prospects, with the purpose of pursuing the overall economic benefits of the enterprise, providing a new concept of catalytic cracking process and oil purification process operation for enterprises to obtain the best product yield and reduce comprehensive costs.

Beijing Huanyu Kexing Science and Technology Development Center.

The main component of silica gel decolorization sand is silica, due to its strong adsorption performance, it is very suitable for use in oil decolorization sand.

This is related to the quality of the oil, the good quality can be filtered hundreds of tons, the poor quality is only twenty or thirty tons, and now the price of silica gel sand has risen to more than 6,000, you can consider the decolorization and filtration of clay.

Mineral decolorization sand can be used, mainly depending on the treatment situation, generally ranging from tens to hundreds of tons. Look at the avatar.

Now, the good quality should be 7,000 yuan a ton, you can consider using activated clay, more than 1,000 tons, and than silica gel sand labor.

At present, there are more than 4,000 tons of decolorized sand on the market, which is far more expensive than decolorized clay.

Now that silica gel sand has soared, it is recommended to try mineral sand and look at the avatar.

The production process and formula of latex gloves are relatively complex, especially the process flow, from latex vulcanization to coagulant to drying, demoval, cooking is not a matter of half a sentence, it is recommended that you consult professional manufacturers, such as Anqiu Latex Products Company, etc., to help you.

It's simple. See what products you need to do. I am Gaomi, the largest production base of protective equipment in the country.

The common latex formula is basically composed of resin and a series of additives, but the specific application and actual words are related to the content of the additives, so the formula is generally obtained by analyzing the sample reduction to obtain relatively better, with the formula plus technology, better production can be carried out. How do you lian system, you can glue it a little.

This product can quickly penetrate into the interior of concrete, through the reaction between the two components and the reaction with the unhydrated cement and cement hydration by-products such as calcium hydroxide in the concrete, to generate a large number of branch-like calcium stone crystals, block the pores and form a three-dimensional network structure, increase the compactness of concrete, greatly improve the strength and hardness of the concrete surface, and form a long-term stable and closed, strong and wear-resistant, dust-free, water-resistant and chemical-resistant surface.

Performance characteristics: 1.Rapid penetration: Generally, it can penetrate to 2-3cm below the surface layer of concrete after three days.

2.Continuous and stable enhancement and reduction of carbonization: the simple use of this product can increase the strength of concrete by 10-30%, up to 40%. And the strength is stable for a long time. At the same time, this product can reduce the carbonization value of concrete.

3.Rapid onset of action: the effect is obvious after 3 days, and the optimal value is reached after one week.

4.Maintain appearance: There is no change in the appearance and interface properties of concrete, and it does not affect other secondary construction.

5.Green environmental protection: no formaldehyde, no heavy metals, non-toxic, non-flammable, non-volatile, TVOC is far lower than international standards, safe construction.

6.Easy to use: direct spraying, saving time and labor.

Recipes like this require RMB. If you experiment on your own, it can be more expensive than buying a formula.

Secret information on the number of cement reinforcing agents, who wants to put the formula out, and what is put out is outdated.

There is no book, and one way to come up with the formula is for various companies to constantly do experiments to summarize.