-
How do you dry the floor quickly on a wet day? A trick for mopping the floor to dry quickly and sterilize.
After returning to Nantian to mop the floor, the floor always can't dry, what should I do?
Today, I will teach you a wonderful idea, you can easily mop the floor with water on a southerly day, and you can also keep the floor dry!
Is there really such a method? Don't believe it! We just need to mop the floor with hot water and put a little bit of something else in it. What's the secret to making your floors dry faster? It's just salt – table salt! It's easy!
First of all, we heat the water until it is not hot to the hand, and the water temperature is about 40 degrees Celsius.
Next, we add a spoonful of salt to the water, stir slightly, and when the salt is fully dissolved, we can start mopping the floor. Soak the mop in hot salt water and wring it out as much as possible to mop the floor clean.
After 1 minute, we made a comparison between the floor tiles that were mopped with cold water and the floor tiles that were mopped with salt water. You see, the whole sheet of paper is wrinkled after the paper towel on the left wipes the area mopped with cold water, while the paper on the right has no water marks at all after wiping the floor mopped by hot salt water, the same as new!
Why does hot salt water have such a miraculous effect? This is because the evaporation rate of the liquid is related to the temperature, the higher the temperature, the faster the evaporation rate, and the floor will naturally dry faster when mopping the floor with warm water. Moreover, the magnesium chloride and calcium chloride in table salt are very absorbent, and they become small particles after drying on the floor, which can keep the ground dry for a longer time.
Amazing, right?
-
Open the door for ventilation, or blow it with a fan.
-
1. Mop the floor with a dry rag: When the floor tiles are wet, you need to wipe them with a dry mop or dry rag frequently to mop the moisture on the floor tiles.
2. Turn on the air conditioner or heater: If the environment in the room is relatively humid, you can turn on the small solar heater or turn on the air conditioner to raise the temperature in the room, and the water content in the air will be enhanced after the temperature rises, so the water will evaporate in the air.
3. Control the opening and closing windows: from March to May every year, there are more days and rainy seasons, so the ground will be more humid, so try to open the windows less during this time to avoid moisture entering the room, and open the windows for ventilation in the sunny afternoon, because the humidity in the air is low at this time, so it can be ventilated for half an hour to an hour.
-
There are two elements to the formation of the causes of resurgence:
The temperature difference between indoor and outdoor is large, and the indoor temperature is low.
2.The moisture content in the air is very high, that is, it is very humid in Guangzhou, it is usually not cold for a few days in winter, and as soon as the cold wave is gone, the temperature will rise immediately, and the temperature difference between the front and back may reach several degrees or even more than ten degrees.
In this case, if it rains before the cold wave leaves, the air will be very humid, and when the outdoor temperature rises suddenly, the indoor temperature is still low, and the warm and moist air meets the cold walls and floors of the building, and the water vapor in it will condense to form water droplets, so there is a return to the moisture.
In addition, before April, even if there is no cold snap, the temperature difference between day and night can still be large, and the same effect can occur if the humid air formed at night becomes warmer after the sun rises and enters the room.
When it rains in the summer, the indoor temperature is usually higher than the outside, and the overall temperature is high, so even if the air is very humid, the water vapor does not have the conditions to condense indoors, so it does not return to moisture.
Correct countermeasures: From the perspective of the cause of the formation of moisture return, the main defense measure is to prevent humid air from entering the room, and the following methods can avoid moisture return:
1.Close all doors and windows, including kitchen and bathroom windows, so that the air does not form convection, and it is not easy for humid air to come in.
2.Turn on the air conditioner to dehumidify if necessary.
3.Prepare a dry mop and be sure to mop it dry when there is water on the ground (it is equally effective to absorb water from old newspapers).
4.Place moisture preventers in your closet.
Wrong response:
1.Opening the windows for ventilation is counterproductive.
2.Take a wet mop to mop the floor Other precautions:
1.If the home has been seriously damp and the air outside the house has become relatively dry, you can open the windows for ventilation, and at the same time, use dry cloths, dry mops, old newspapers, etc., to treat the water on the floor and wall at home.
2.If the home has been seriously resurged, it is recommended not to use TV, computer and other electrical appliances in a hurry, these appliances will have a lot of dust after long-term use, and together with water vapor, it is easy to cause a short circuit and burn (of course, for computers or electrical appliances that have been running, the probability of problems is relatively much smaller).
-
Commonly used in the family is sawn wood powder sweeping, with sawn wood powder has no chemical reaction, non-toxic and harmless; If it is a factory brick making, there is the corresponding equipment.
-
Here's how to dry quickly when the ground is damp:
1. Mop the floor with a dry rag. When the floor tiles are wet, you need to wipe them frequently with a dry mop or dry rag to mop the moisture on the floor tiles.
2. Turn on the air conditioner or heater. If the environment in the room is humid, you can turn on the small solar heater or turn on the air conditioner to increase the temperature in the room, and the water content in the air will increase after the temperature rises, so the water will evaporate in the air.
3. Control the opening and closing window. From March to May every year, there are more days back to the south and the rainy season, so the ground will be more humid, so try to open the windows as little as possible during this time to avoid moisture entering the room, and you can open the windows for ventilation in the sunny afternoon, because the humidity in the air is low at this time, so you can ventilate for half an hour to an hour.
Polyurethane foam:
Polyurethane rigid foam is a polymer made of isocyanate and polyether as the main raw materials, mixed by special equipment and foamed on site by high-pressure spraying under the action of various additives such as foaming agent, catalyst and flame retardant. There are two types of polyurethane foams: soft foam and hard foam. The soft bubble is an open-cell structure, and the hard bubble is a closed-cell structure. Soft foam is divided into two types: crusting and non-crusting.
Uses: High efficiency and energy saving, no gap after filling, strong bond after curing. Shockproof and compression-resistant, no cracking, no corrosion, no falling off after curing.
It has ultra-low temperature thermal conductivity, heat resistance and heat preservation. Efficient insulation, sound insulation, waterproof and moisture-proof after curing. This caulk adheres to concrete, coating, wall, wood and plastic surfaces.
-
Ground Wet Solution:
1. Quicklime moisture-proof: put some quicklime indoors, which can absorb water vapor in the air and keep the room dry.
2. Light candles: Light incense on the paved floor, which can effectively dry the air and remove the musty smell in the room.
3. Spread old newspapers: In addition to closing the windows at home, you can also lay old newspaper lines on the ground, which can also absorb some water.
4. Dehumidify with air conditioner. Most air conditioners now have this feature. Activating the dehumidification function of the air conditioner can effectively solve the problem of dampness in the room during rainy hours, and can also form all-round protection for "moisture-afraid" household appliances such as TVs and computers.
There are two reasons why the ground is wet:
When the humid air with high temperature encounters the ground with low temperature and smooth and does not absorb water, it is advisable to form condensate on the surface of the ground, which mostly occurs in the rainy season with a lot of rain, high temperature and high humidity. Once the weather clears up and dries, the resurgence of moisture can be eliminated.
The second is that the water in the foundation soil under the ground cushion rises through the action of the capillary, and the gaseous water penetrates upward, making the ground material wet, and then worsening the humidity of the whole room, which often occurs all year round, which is difficult to deal with, and the poor drainage around the outside, and the poor ventilation of the room will cause a large area to return to moisture.
When the building material with poor compactness is used as an indoor floor, it will increase the capillary effect, making the ground moisture return more serious.
-
The way to solve the damp ground is as follows: close the windows appropriately, lay moisture-proof mats on the ground, lay waste newspapers, wipe the wooden floor with a soft dry rag, and mop the floor with salt water.
1. Close the windows properly.
Because the weather is relatively humid, so properly close the window, can solve the problem of ground moisture return, especially in the morning and evening, the humidity is more serious, in the afternoon Li and the weather is relatively dry, Sun Chao can open the window to dry the ground, to achieve the effect of dehumidification.
2. Lay moisture-proof mats on the ground.
You can lay a moisture-proof mat on the ground, which can block the moisture from the outside world and achieve the effect of heat preservation and moisture-proof.
3. Spread waste newspapers.
For places where the ground is more humid, you can lay waste newspapers, which can not only absorb the moisture on the ground, but also rub the water on the shoes, which plays a role of killing two birds with one stone.
4. Wipe the wooden floor with a soft dry rag.
You can wipe the floor with a soft, dry cloth, and after wiping, close the window well, and never open the window, otherwise it will cause the floor to be wetter.
5. Salt water mopping the floor.
You can add salt with warm water, and after the salt is fully dissolved, you can mop the floor with salt water, wring it out as much as possible and then mopping, which can have the effect of preventing moisture.
Life Tips: What to do if your home is damp.
Open the windows and doors to allow sunlight and fresh air to come into contact with the dark walls, so that after a while the damp insects can be eliminated.
Dehumidify with an air conditioner. Most air conditioners now have this feature. Activating the dehumidification function of the air conditioner can effectively solve the problem of dampness in the room during rainy hours, and can also form all-round protection for "moisture-afraid" household appliances such as TVs and computers. >>>More
When we look at the mold in a wardrobe, we should first pay attention to clean up the moldy place, generally you can use a dry paper towel to wipe it clean, or use a dry brush to clean the moldy place. If it is not clean, you can use a damp cloth If you find mold, in addition to wiping the mold with a cloth, we also need to brush the varnish on it again, so that it can effectively prevent mold from growing again. Mould is mostly caused by paint problems, so we can also use the rainforest to clean it and then wipe it with a clean cloth.
The room is damp, or the environment is a problem, plus the lighting is not good, it will be like this, Yaguang Ya experts give you a little advice: >>>More