Is the power block g9656D compatible with g9656?

The words of the two of them are universal, relatively speaking, the two can be used together, and there is relatively no problem with the same model, so don't worry.

These two modules are definitely not universal, because the models behind these two power modules are not the same, so the model of the former may be a little better than the model behind.

It is definitely not possible to use between the two, and if it is universal, there may be a certain rejection, so try to choose the original factory.

The two modules are common and most of the features are the same and can be used interchangeably.

Hello, these two are not universal. The current of the battery is different. There is a risk of damage to the components.

You look at the two power modules, is it the same output voltage? The output voltage is the same, and the output current is the same, which is universal.

Clerk, is accounting 9656 lower than 9656 generic? In the case of power blocks, these two should be more versatile, and they can be. The two of them can be used universally.

There is not much difference between these two power supplies, one is only a strengthened type, which should be universal.

These two super words cannot be used universally, the main reason is that the difference is relatively large, and if they are universal, it is easy to have problems.

If there are two pieces, that one can be universal, and I feel that it can be directly universal.

Probably not, there is a difference in this model.

Will the power supply be universal to this 9656 for this 9656? I don't think these two are universal.

1. Lead by example, if you can't even do it yourself, how can you be a squad leader? 2. Good popularity, I was changed to deputy squad leader because of bad popularity

Insufficient power supply of the computer will lead to a failure that the computer is powered on and does not display. The workaround is:

1. Click on the power supply to pop up a small window.

3. Click Change Plan Settings to enter the Plan Settings window.

4. Click the drop-down button next to Reduce the display brightness and select the time.

5. Click the drop-down button next to the turn off monitor and select a time.

6. Click the drop-down button next to Put the computer to sleep and select a time.

Insufficient power supply of the computer will lead to a failure that the computer is powered on and does not display.

Power supply faults can be eliminated by using power supply test instrument detection.

If the test is normal.

1. Unplug the computer power cord first, and press the on/off button on the chassis 5-6 times. Releases the residual charge of the motherboard.

2. Then open the side panel of the chassis and plug and replace the slots of the memory.

3. Remove the CMOS battery from the motherboard and install it after 1 minute.

The computer has a discrete graphics card, so it's best to plug and unplug the graphics card. After the above operations are completed, the computer is powered back on.

The fault still needs to be booted using the minimum system method: (power supply + motherboard + CPU + memory + graphics card + monitor).

At this time, you should normally see the display content, pop up the hard disk can not be detected, keyboard and other prompts, you can enter the BIOS, and the buzzer has no abnormal sound. If it is abnormal, the monitor does not display (or the screen is blurred) or the buzzer has an abnormal sound.

1) Memory issues.

a.Problems per se. It doesn't work in any slot, and it doesn't work on other machines. Then the only way to do this is to change the memory. Buzzers generally have an unusual sound.

b.Compatibility issues. Other machines can be used, but this one can't; Or a single root can be used separately, but two roots cannot be used. Change memory.

2) Display graphics card issues.

a.Wiring issues. Check if there is any needle breakage or short circuit.

b.The graphics card itself is damaged.

c.The monitor is damaged (very unlikely).

b.Motherboard issues. The graphics card slot part, or the related control circuit is faulty. At this time, it can only be solved by changing the motherboard.

It is recommended that you try to change the power battery first, if it still doesn't work, the parts of the machine itself are loose or the chip is damaged by virtual soldering, common reasons: the memory is loose or the memory itself is problematic, reinsert the memory or change the memory to try; The power supply chip of the motherboard is soldered or aged, the screen cable is loose or the motherboard short-circuits the power supply circuit of the screen; Graphics card, south bridge, north bridge BGA packaging chip virtual soldering or damage, generally there are more virtual soldering, just add soldering.

Power supply issues are unlikely.

Is your computer used for many years, if so, one may be the memory strip gold finger, independent graphics card gold finger, independent network card gold finger oxidation caused by poor contact, the solution is to unplug the memory module, independent network card, independent graphics card wipe with alcohol or eraser, the slot with a slotted screwdriver to scrape properly, pay attention to control the strength; Another possibility is that the zero components on the motherboard are damaged, such as capacitor bursting, which can only be sent for repair.

No, a good power supply is a sudden power failure to protect itself, and then turn on the power cord must be unplugged and discharged.

The power supply of the third wire or copycat is directly burned, and even the motherboard is affected.

Yes, there is also a possibility that the hardware will be burned out.

There is also a possibility that the hardware will be burned out, so it is recommended to replace it with a better one.