Jeans in the spleen refers to which position 5

There are 4 different waist positions, which are:

1. The front wave is more than 10" for the super high waist.

2. The waistline is higher than the navel for a high waist.

3. The waist of the trousers is below the navel, and the waist above the hip bone is the middle waist.

4. The waistline is lower than the hip bone for a low waist.

In medicine, the lumbar refers to the part of the upper hip of a human or quadruped that is distributed on both sides of the spine, between the hip bone and the false ribs.

Jeans parting:

By pants type. 1. Straight-leg type: the most basic style of jeans, which is more compatible with daily clothing.

2. Light and thin: Emphasize the elegant style, which is thinner than straight-leg jeans.

3. Small bell tube: Considering the convenience of wearing high-top shoes, the trouser tube is slightly larger.

4. Big bell barrel type: a popular style in the 70s of the 20th century, the pants under the knee are very large.

5. Small pants type: In recent years, it has become popular and focuses on casual style pants.

Press the waistline. 1. High-waisted jeans: The belt is located above the navel and was widely popular in China in the 70s and 80s.

2. Mid-rise jeans: The belt is located below the navel and above the cheekbones, which is the most common style of jeans.

3. Low-waisted jeans: The waistband is located below the cheekbones, low-waisted jeans are mostly women's style, but men's jeans often have low-waisted or low-waisted styles in pursuit of the best effect.

Weight per unit area.

1. Lightweight jeans: Jeans weigh less than 8 ounces per square yard of denim.

2. Medium Jeans: Jeans weigh more than 8 ounces per square yard of denim and less than 13 ounces.

3, Heavy Duty Jeans: Jeans, which weigh more than 13 ounces per square yard of denim.

The fabric size of the jeans.

Denim is a garment that can be worn all year round, so how to distinguish different types of denim: first of all, according to the thickness of the denim, it is divided into An, 6An, 8An, 10An, 11An, 12An, An, An, An, etc.

The weight of the cloth is related to the yarn count and the warp and weft density of the fabric, the coarser the yarn, the greater the density, the thicker the cloth, and the greater its weight. Generally, it can be divided into three categories: light, medium and heavy. The light cloth weighs 200 340 grams square meters (6 10 ounces square yards), the medium cloth weighs 340 450 grams square meters (10 ounces 13 ounces square yards), and the heavy weight weighs more than 450 grams (13 ounces square yards or more).

Spleen circumference refers to the circumference of the thighs, as for whether the pants are slit at the side or 1cm below is a personal habit.

The position of the rungs in the textbook, the position of the next inch in the outer sheet, the term for the paper pattern of the southern pants.

It's the most normal kind of low and high waist are worn by girls.

Spleen circumference refers to the waist circumferenceHipsThe circumference between is also called belly circumference.

Spleen circumference is the term for the paper pattern of trousers, which is in the rungs in textbooks and an inch in the outer sheet. If you prefer to be looser, you can have about 4 cm more, and it is recommended to prefer slim 2 cm. Formal foreign trade clothing is required to indicate the bust circumference, waist circumference, upper seat circumference, lower seat circumference, and shoulder width.

Chest distance, chest shoulder distance, waist to skirt legs, full length.

Commonly used garment cutting terms.

1. Net sample - the actual size of the garment, excluding seams, welts, shrinkage, etc.

2. Wool sample - cutting size, including seam, welt, shrinkage, etc.

3. Splitting potential - the bias of a straight line, such as the bias of the upper end of the placket of the jacket door.

4. Warping - the upturn (elevation) of the horizontal line, such as the backward warping of pants refers to the amount of elevation of the back waist seam at the back crotch seam.

5. Distress - the deviation of the straight line is out, such as the distress of the pants refers to the deviation of the trouser at the upper end of the side seam.

6. Placket - generally refers to the keyhole edge of the clothing piece.

7. Placket - generally refers to the nailed button edge of the clothing piece.

8. Cutting edge (knife eye) - cutting a small gap in a certain part of the outer mouth of the piece to play a positioning role.

9. Drawing - a single piece of drawing refers to the cutting line directly drawn on the raw materials according to the style of the tuba according to the specifications.

10. Pleats - according to the curves and shapes of the human body, the parts that need to be folded or folded regularly.

11. Silk strands - the yarn direction of the fabric can be divided into straight silk locks, horizontal silk locks and oblique silk locks.

12. Welt - refers to the part of the reverse side of the bottom of the garment, which is not included in the total length. Such as trouser welt, hem welt, etc.

13. Potential - the three-dimensional form of a certain part of the garment, which generally refers to the form of the combination of clothing pieces or model lines.