The laptop doesn t move, and the screen doesn t respond

Probably a touchpadDriversThe laptop touchpad is turned off if it is damaged or accidentally uninstalled by the user. Some notebooks can turn off the touchpad through settings, so if you accidentally turn off the touchpad, it will naturally cause the touchpad to malfunction, caused by a virus in the computer.

Open the Control Panel.

Select the printer and other hardware, click the mouse, select the device setting value in the pop-up mouse properties window, select any of the last two items (static icon or live **mark) in the touchpad icon, click OK, then the touchpad icon will appear in the tray area in the lower right corner of the desktop, right-click on the icon, and select "Tap instead of keystroke", so you can.

Laptop considerations.

Do not touch the surface of the screen with fingernails and sharp objects (hard objects) to avoid scratches, in order to avoid being scratched, it is recommended that you stick a screen film, which can play a good role in protection. This protective film is applied to the laptop when you are not using it and removed when you are using it, which can effectively protect the chemical coating on the outer layer of the screen, so that the outermost coating will not be oxidized prematurely.

If you can't guarantee that the battery will be completely clean and recharged every time, it is recommended to perform a battery power correction action on average every two months - standard charging and discharging (i.e., clean and full after being fully charged, remember to calibrate it when you have time, because calibrating the battery is a waste of time), or regularly use the built-in battery calibration function of the BIOS to maintain it, which is very beneficial to prolong the life of the battery.

Hello! 1, fn+f7 will light up after turning off the screen, in this case, the new version of the atkpackage driver turns off the screen in order to prevent misoperation, and will automatically light up when the keyboard, mouse, or system information is triggered or prompted. 2. Regarding the situation that the lid cannot be woken up when closed, it may be that there is a problem with the system or driver installation, such as using the driver software ** to update the driver or using the universal driver package driver.

3. For newly purchased machines, please install and use windows864-bit system, after installation all drivers use the driver disc or from. CN directly installs, do not use driver software or other software, **update the driver or system vulnerability patches, will lead to driver incompatibility or other error problems. This can make the system have better compatibility and stability.

Hope you find the above information helpful! If the above reply still does not help you, then we are very sorry, you can continue to ask for advice! Thank you!

What causes it.

The laptop screen does not respond when turned on mainly due to the following reasons:

1. The memory cannot be turned on due to poor contact, 2. The display screen is not lit due to the problem of display wiring;

3. The display screen is not lit due to the bad display tube, and 4. The display screen is not lit due to the bad display motherboard.

The computer laptop screen is not responding. If the computer laptop screen does not respond, be sure to find the power supply of the laptop, which is difficult for the layman to find, so if you are a layman, send the computer directly to the computer repair department for repair.

2.Tap "Devices", select "Touchpad", and turn "Touchpad" on.

3.Check "Keep the touchpad open when the mouse is connected" to adjust the sensitivity of the touchpad to ask questions.

The laptop touchpad is locked, press the assembly FN+F9 (usually with these two keys), but Lenovo can turn the touchpad on or off by pressing F6 directly. ACER is using FN+F7, if it doesn't work, see if the trackpad driver is turned off in the BIOS, the specific method is, press the F2 button to enter the BIOS when you boot up. In advaced--pointingdeivce--see if you select disabled, and if so, change it to enable.

Ask a question [black line].

Dear, I'm glad to answer for you. Dear, the solution to the laptop screen is as follows: 1. If it is a reed rent, it will not move on the way to use it and will not respond.

This may be due to accidentally turning off the touch screen, generally press fn (function key) + f6 (different keys for different notebooks, there is a touchpad image on the button) to unlock it, and some computers also have buttons that directly accompany Li to open and close the touchpad. 2. You can check whether it is a driver problem. If you have reinstalled your computer, you should install the appropriate driver before trying to enable the touchpad.

3. You can restore it through the settings, open the properties of the mouse in the control panel, you can see that there is a "device setting value" after clicking, you can see that there is a "setting value model" on the interface that comes out, and an interface comes out after clicking, and you can see that there is a "touch" on the left side of the interface, and a "enable touch" will come out on the interface on the right, and you can click on it after you select it.

There could be a number of reasons why your computer screen won't move. Here are some common possible causes and workarounds:

Mouse issues: First, check if the mouse is working properly. Try connecting another mouse or connecting the current mouse to another computer for testing. If the problem is only with a specific mouse, the mouse may need to be replaced or repaired.

Mouse driver issues: Make sure the mouse driver is properly installed and updated to the latest version. You can try uninstalling the mouse driver in Device Manager, and then restarting your computer to allow the operating system to reinstall the appropriate driver.

Software conflicts: Sometimes, certain applications or software may interfere with the normal functioning of the mouse. Try booting your computer in safe mode and see if the problem persists.

If the mouse moves normally in safe mode, you may need to identify and uninstall or update the software that is causing the conflict.

Hardware issues: In some cases, hardware failures may cause the mouse to be unable to move. Check that the mouse and computer are well connected.

If you are using a wireless mouse, make sure that the signal between the mouse and the receiver is normal. If possible, try connecting another mouse or connecting the current mouse to another computer for testing.

Operating system issues: In some cases, issues with the operating system can cause the mouse to not move. Try restarting your computer and see if that fixes the issue. If the problem persists, consider performing a system recovery or reinstalling the operating system.

If none of the above solutions solve the problem, it is recommended to contact computer technical support personnel or professional repairer stool returnee for further assistance and diagnosis.

The computer screen does not move, first of all, it may be caused by the computer stuck, it is recommended that the user wait patiently for a while, and then shut down and restart after the computer has reacted, if the computer has not moved, the user can directly press and hold the computer power button to force the heavy cherry blossom to start it.

If the forced restart of the computer does not solve the problem of envy, it may be a problem with the computer driver, it is recommended that the user update the computer driver to try to see if it can solve the problem.

If the problem still cannot be solved, it means that it is a hardware problem, and it is recommended that the user contact the after-sales service for relevant testing.

Computer skills: Take win10 system as an example, when using the computer, if the user wants to adjust the size of the computer desktop icon, just right-click [View] in the empty ridge of the computer desktop, which can be set to [Large Icons] [Medium Icons] or [Small Icons].

If the computer cannot access the Internet after connecting to WiFi, the user can restart the router, or restart the computer directly.

Data expansion: The Windows 10 operating system has been greatly improved in terms of ease of use and security, in addition to the integration of new technologies such as cloud services, smart mobile devices, and natural human-computer interaction, it has also optimized and improved and supported hardware such as solid-state drives, biometrics, and high-resolution screens.

There may be a variety of reasons why the computer screen does not move, and here are some common reasons and solutions:

Mouse issues: If the mouse is faulty or poorly connected, the computer screen will not be able to move the cursor. Try replacing the mouse or check if it is connected correctly.

Operating system issues: Sometimes the settings of the operating system affect the speed or sensitivity of the cursor, you can try adjusting these settings in the control panel.

Display issues: If your monitor's driver is outdated or if there is a hardware failure, the screen will not be able to move the cursor. Try to update the activation program or contact after-sales service for repairs.

Viruses or malware: Some viruses or malware may prevent the cursor from moving the cursor from your computer screen. It is recommended to install anti-virus software and perform a full disk scan to remove potential threats.

If none of the above methods solve the problem, it is recommended to contact a computer professional for further investigation and repair.

First of all, check whether it is a problem with the mouse, then check whether it is a problem with the display of the travel screen, and then check whether it is a problem with sick car poison or malware, and finally if it is not, it may be a hardware or system problem.