How to deal with the CAD special card when the computer is opened

1. Open the CAD software first, enter OP, space, and open the system-performance settings.

2. Select Adaptive Downgrade. Downgrade when fps is lower than 60 (fps default is 5).

Note: Range of fps values.

0 10, very unsmooth, feeling very stuck, positioning is not easy;

10 20, not smooth, the operation needs to be slowed down;

20 30, mostly fluent, with occasional pauses;

30 or more, very smooth.

3. Still on the performance panel, on the right, open the hardware acceleration "manual adjustment", remove the manual adjustment hook, and do it according to the figure below:

4. After completing the internal settings of the software, close the CAD and proceed to the next setting. Locate the CAD source file.

To install the package, double-click to install. Click "Install Tools and Utilities" - check only the second item "Autodesk CAD Manager Tools" to install. It's greyed out here because I've already installed it

5. After the installation is completed, open the program "CAD Administrator Control Program" in the computer "Start"--Programs--Autodesk-

6. After opening this control program, set it up, and finally click Apply to close this program.

7. Now reopen CAD, it only takes a few seconds to open the software, and the speed of using CAD to draw planes and model is as fast as !! How about it, give it a try!

Note: You need to close the CAD software in order to use the CAD Administrator Control Program.

Win10 system is not recommended to use the previous old version of CAD software,Because the compatibility is not good,The new version of CAD software,It is also recommended to use the domestic Haochen CAD2010 version,Because the domestic software does not need to be sinicized,The installation package is small,Occupy a small memory,It is much smoother。 Of course, if you are just simply modifying the CAD drawings, you can also use the genuine free and lightweight Haochen CAD Picture King computer software, the installation package is smaller, the running speed is fast, the operation is smooth, easy to use, the interface is as follows:

1. The first way is to adjust the compatibility between CAD and the computer, you can select the CAD icon and select the attributes.

02. After entering the properties, select Compatibility, and check the program of the branch in compatibility mode, and the program of the branch as administrator below. Then click Change settings for all users.

03. After entering the compatibility of all users, check the program of the branch in compatibility mode and the program of the branch as administrator below. Click Apply and OK. This will adjust the compatibility well.

04. After adjusting the above compatibility, you can test whether it can be opened normally, if it can't be opened normally, revoke the certificate of the check publisher to remove, so that the certificate of the network will not be accessed. Specific operation 1, select Start - Settings - Control Panel. 2. Select the Internet option.

3. In the Internet Properties dialog box, click Advanced Labels. 4. Clear the "Check for Publisher's Certificate Revocation" option.

05. As long as the above steps are adjusted, you can open the CAD.

Let's talk about the solution to the problem that the computer configuration is a little lower and you can't get in, you just need to disable the opening and running (windows key + R), enter regedit to open the registry.

06. Find the following location in the registry:

hkey current user software autodesk autocad :804 infocenter infocenteron and then change the value to 0.

07. In this way, the computer configuration can also be opened with low configuration, because CAD and network connection are prohibited, which will reduce the use of a lot of memory and cup, and the operation will be faster. It won't get stuck on the boot screen.

There are several scenarios:

When you boot up, don't operate it immediately after booting, because the computer is loading programs in the background when you boot up, and it's very stuck, please wait a while to operate, which is normal.

Software conflicts, inappropriate drivers, system problems, first uninstall the drivers, software, patches, etc. installed before the accident, you can restore the system, or not reinstall the operating system.

The disk may be damaged due to illegal shutdown or other reasons, repair it.

Zhongke Testing. It is a cosmetics testing and filing service organization, which can carry out cosmetics risk service testing, has the qualification to carry out special cosmetics filing and testing, and meets the requirements of the "Cosmetics Registration and Filing Inspection Work Specifications" and the "Metrology Law of the People's Republic of China" on cosmetics inspection qualifications, and is a service organization confirmed by the State Drug Administration to undertake cosmetics registration and filing inspection.

Zhongke Testing. It is a cosmetics registration and filing inspection agency recognized by the State Food and Drug Administration, and in the field of cosmetics testing, it has CMA, CNAS and other qualifications, and has undertaken the supervision and sampling and risk monitoring tasks of the national and provincial competent authorities for many times, and has provided quality supervision services for e-commerce platforms such as JD.com and Tmall.

Zhongke Testing. It can carry out one-stop testing services such as risk substance testing, human efficacy evaluation, toxicology experiments, product type inspection, and safety assessment.

It may be that the cracked version is not very stable, it may not be cracked well, or it may be that the computer configuration cannot keep up with or the system is incompatible, generally wait for a while and wait for the software to be loaded and use it smoothly, the solution can be to reinstall it again, or install the genuine version, or install a lower version, or upgrade the computer configuration, or try a different system,

The computer configuration is not good, so add a memory module to try.

1. Analysis of the causes of CAD jamming:

Lack of fonts; The open file is too large;

The configuration of the computer is too low.

Second, the way to solve the CAD drawing jamming:

Every time the "block" is finished, it will become a good card to exit, at this time, you can use the shortcut key "Z", then space, then "A", Kai Sheng and then space, so that all the graphics are displayed, and the model is regenerated with "re", so it's good.

The more you draw the drawings, the larger the image file becomes, and the memory increases, and it will become very stuck. You can use the shortcut key pu command to clean up and delete the useless layers, tiles, annotations, text, etc. in the file, and after cleaning up these redundant things and lines, it will reduce the size of the document, this method you can try often, very effective.

You may feel that your mouse will delay the operation speed of your hand, there will be a sluggish, sluggish feeling, one reason is that "grid" or "snap" is played, press f7 or f9 on the keyboard to turn off, and it is OK. Of course, there is also a way to "save the current drawing as a dxf format mega balance" file, which will make the "educational" stamp disappear, and will also remove a lot of loaded useless parameters. Useless parameters will cause CAD software to become stuck, why?

Because there are many internal parameters of CAD, CAD will become stuck.

Why is the laptop opening CAD very slow lately, and it often gets stuck, how to fix it?

The solution is as follows: 1. Open the CAD software first, enter OP, space, and open the system-performance settings. 2. Select Adaptive Downgrade. Downgrade when fps is lower than 60 (fps default is 5).

Note: The range of fps values is 0 10, which is not smooth, feels very stuck, and is not easy to position; 10 20, not smooth, the operation needs to be slowed down; 20 30, mostly fluent, with occasional pauses; 30 or more, very smooth. 3. Still on the performance panel, on the right, open the hardware acceleration "manual adjustment", remove the manual adjustment beam hook 4, after completing the internal settings of the software, close the CAD and proceed to the next setting.

Bury Qingyun found the CAD source file installation package, and installed it with a double difference. Click "Install Tools and Utilities" - check only the second item "Autodesk CAD Manager Tools" to install. 5. After the installation is completed, open this program "CAD Administrator Control Program" in the computer "Start" - Program - Autodesk - 6, open this control program and tick 7, now reopen CAD, open the software in just a few seconds, use CAD to draw planes, modeling, the speed is as fast as ever.

Summary. Hello Dear Kiss Glad for your question What should I do if CAD gets stuck as soon as it is operated? 1.

Step 1: Find the shortcut icon on the desktop and right-click on the property option. 2.Step 2 Toggle the tab from General to Compatibility.

3.Step 3: Select the compatibility mode and privilege level and click OK. 4.

Step 4: Once you boot it up again, the add-on in the bottom left corner will run quickly, load and boot up.

Hello Dear Kiss Glad for your question What should I do if CAD gets stuck as soon as it is operated? Staring for early answer 1Step 1: Find the shortcut icon on the desktop and right-click on the property option.

2.Step 2 Toggle the tab from General to Compatibility. 3.

Step 3: Tick the Compatibility Mode and Privilege Level checkboxes and click OK. 4.Step 4: After starting again, load the Caphen item in the lower left corner to quickly run, load and start.

Changing the compatibility model Zhaochang style and the administrator identity operation has no effect,CAD as long as an operation,Whether it is a pinch point,Draw a line or copy and paste the letter sticker will be stuck,A stuck computer fan is loud,Why is this? What to do? Handwheel.

Hello dear I am very happy that your problem is estimated to be mainly a problem of win7 software and pants. The "Compatible Program Options" are available during installation. If the installation of the stool bar is completed, you can right-click on the map of the jujube pure Hu Biao - compatible, set the compatible environment and the administrator to run.

The main reason

1. The biggest problem lies in the win10 system! You can see the online consultation notebook CAD is very stuck, and the configuration is very good (CAD itself does not eat computer hardware), but most of the consultants are win10 system.

The main reason here is that most versions of CAD before 2014 only support win7, win8, win10 is not compatible with CAD. The solution can use a higher version, the official website states that it supports the CAD version of win10, or use the WIN7 system to use CAD.

Then it's to update win10 to the latest version,I don't know which version to start with,win10 is not compatible with CAD,The problem of running is not smooth,Mine is in Microsoft's official website with a USB flash drive to reinstall win10。

2. The original notebook is 8G memory, and it is always a fatal error to use CAD, which I think is caused by memory problems, in short, an 8G memory module is installed, and the dual-channel mode is set, which effectively solves this problem.

3. For CAD and CAD plug-ins such as Tianzheng, etc., the compatibility mode is set to win7 (PS: not sure how big the effect is).

4. When installing CAD, open the installation package as an administrator and install it on the system C disk (the system disk is best to use a solid state drive), and it is also used as an administrator for ordinary use.

5. Set the graphics card used by CAD as your discrete graphics card (no waste).

6. CAD runs in and hardware acceleration is turned on, which is very helpful for the scaling and movement of drawings.

7. Then clean up the surface, make good use of cleaning commands and plug-ins, and some layers inside CAD will also have an impact. Our company's frame layer will be stuck as long as the drawing is open, and I don't know much about the reason for this.

8. If there are too many snap point types for object snaps, it will sometimes have an impact, and opening the grid display will also cause the CAD to become stuck.

This means that your computer configuration is low, and running such large software will be stuck, so it is recommended that you send your computer configuration. This kind of large-scale drawing software has high requirements for the computer, and if the configuration is not high, it will feel obvious lag when drawing.

If you configure this computer, if you use CAD, there will basically be no card phenomenon, if it is a card, then a big reason is because of some software problems, such as various drivers, and the graphics card is not installed. There are too many background programs, and the other thing is that it is infected with a virus.

You cd she is she he is a drawing software, this software has a very high demand for graphics cards, so your computer must be not enough graphics card, with a better graphics card.