Can the current of the MDS rectifier module be adjusted?

It cannot be adjusted. The rectifier modules used on the air conditioning units are integrated, the simplest modules, and are not designed to be the type that can adjust the key parameters. Because it's too expensive to design a product in this way.

For air conditioning product manufacturers, they will choose key components of different specifications and models on different models to achieve the lowest product cost.

You can directly consult the after-sales service of the product manufacturer's headquarters to confirm the relevant information.

The current size of the MD S rectifier module you mentioned should be adjustable. There should be an adjustment knob there.

MDS, the size of the current of the rectifier module, is generally adjusted, and when you use this rectifier module, he will determine the size of the current.

The function of the rectifier module is to rectify the current, and the output current cannot be adjusted.

The current size can of course be adjusted, and there is an adjustment knob there.

In particular, this current can definitely be adjusted, under normal circumstances, press its adjustment button, and its current can be adjusted at any time.

There are a lot of three-phase rectifier bridge brands on the market, generally the output voltage = multiple of the input voltage, your Hangzhou Guojing MDS three-phase rectifier bridge output voltage = input voltage *

IM DS rectifier module current, this should be able to well adjust the hero of Da Qiao, this hero can better meet the use of this adjustment size, it should be relatively good, this should be very good.

There is no need to enter the function, it is all the size of the Joe on the grade.

Glad VM, you are the rectifier module current adjustment can be passed by TVC

SDMDS, can the current of the rectifier module be adjusted? I can regulate it.

Method:1To become adjustable, it depends on the power of the charger, and if the output resistance is a rated resistance, it needs to be replaced with a variable resistor.

2.Assemble the charger, install a regulator to adjust the size of the resistor, and set it according to the safe range of charging equipment.

3.It is also possible to use software adjustment, using system tools, to set the resistance through the software settings, and then adjust the current.

For this rectifier module, it is recommended that you find an electrician to take a look.

Adjust it according to the instructions.

The test method is the same, and it is impossible to measure the size of the rectifier bridge if you want to. There are nominal names on the three-phase rectifier bridge, such as: MDS-100-16, that is, the three-phase rectifier bridge 100A1600V

The MDS300 can be used as a substitute for the MDS200 if the installation space permits, and the higher the nominal current, the smaller the loss.

Large horse-drawn carts are allowed, and small horse-drawn carts must not be allowed, which will affect the stability of use too hard.

If you have any questions, please feel free to continue asking questions.

MDS is the model of the Lianggela three rubber sliding dust wide-phase rectifier module.

Brand Model: Guerte MDS100D-16Power characteristics: high power.

Forward peak voltage: 1600(v)v

DC output current: 100 (A).

Shutdown speed: Normal.

DC output voltage: 1600 (V).

AC input voltage: 1600(V)V

Number of poles: three poles.

Rectifier Element: Full Bridge.

Working junction temperature: 100 ( ).

Frequency characteristics: IF

Efficiency: 100 (%)

Applications: Motors.

Insulation voltage: 1 (V) V

Model: MDS100D-16

Package shape: Flat bottom.

Reverse repetition peak voltage: 1600(V)V

Reverse repetition peak current: 1(mA) mA

Brand: Guerte