How to deal with small tricks with large waistbands?

The waist of the pants can be added to the waist of the pants with an elastic band, which is divided into 3 steps, and tools such as scissors, elastic bands, needles and threads, and buckle needles are used, and the production process should be paid attention to safety. The following are the detailed steps to add an elastic band to the waistband: 1. Use scissors to disassemble the thread at the seam of the waistband, thread the buckle on the elastic band, send it into the gap, and turn around the pants.

2. After adjusting the appropriate elasticity, sew the elastic head with thread and needle, and then cut off the excess elastic band. 3. Remove the button and sew the opening with the same color thread as the pants.

Tip 1: Buy that lazy belt in Pinduoduo. It can be adjusted according to the size of the waist, which is very convenient and practical. Now I bought one and I'm using it.

Trick 2: There is also the kind of card that is more good-looking. It's about pinching up the big part. This kind of waistline is also very fashionable if it is exposed. You can give it a try.

It's a good way to have a big waistband of pants, and you can tighten the waistband of your pants. The other is to admit the bunk and let him make it smaller. It's these two methods to finish the last one, the method is that you eat fat naturally, except for pants, you will be fat and thin.

The best way to deal with the large waist of the pants is on both sides, you can use a more beautiful elastic belt on both sides, and buckle such an elastic belt, which is not only beautiful but also solves the problem of fat pants.

You can go to the tailor shop and change it!

You can add an elastic band on both sides!

You can pinch a pleat twice!

You can draw a belt!

You can get a strap clip on!

The waist of the pants is big, how to deal with it? Of course, find someone who knows how to tailor to change it for you! In other words, tuck in your waist so that your waist looks like it's about the right fit for you.

The pants should be big, how to deal with them? Small trick, I think the pants should be bigger. You can put a little leather pants on both sides to make him bigger, how to deal with it? Trick, I think the pants should be big, you can put a little rubber band on both sides, can you put it away?

It's easy to do with a waist pin.

If the waist of the pants is large, you can make it smaller, and you can use the following methods:

1. If the pants are not too big, within the controllable range, you can buy a belt.

2. You can change the waist circumference of the pants to a smaller size: first measure your waist size, then measure the size of the waist of the pants, and then subtract your actual waist size, you can see how much the pants are bigger, and then you can change the waist circumference of the pants to a smaller one. Tuck the excess inward on both sides of the pants and sew more in the process of sewing.

In the process of sewing, the line should be smooth, and it should not be closed suddenly, which will look too abrupt.

3. Add straps: make two straps of the same color and material as the pants and sew them on the waistband of the trousers.

How to make your pants bigger:

1. First turn the pants to the back and use scissors to cut the waistband of the pants at the back.

2. Seal the cut place with a needle and thread, and finally lock the edge, and you're done.

Rubber band: The way to not change the size is to find a way to button the pants, you can use a rubber band to circle the buttons of the pants, and then put the rubber band into the hole on the other side of the pants, wait until the rubber band passes through this eye, then pull it back, and then buckle it to the button.

3. The second needle is picked out in parallel to the upward.

4. Then the third needle is picked out diagonally upwards in parallel.

5. The fourth needle is still picked out diagonally upward, and then continue the above steps.

6. Sew it into a trapezoidal shape.

7. Tighten the line below and tie the knot.

8. The most such trouser waist can be tightened small trouser waist.

It's so simple, you can find a paper clip and pin it where you want it to be narrowed, and remove it when you don't need it, which is convenient and fast. And when you get fat, you can still wear it, no need to transform.

Re-tie the elastic band inside the waistband. Or spread out a few sections.

Use a needle and thread to sew up some of the fabric at the waistband of the trousers. Note: It is best to sew up an inconspicuous piece of fabric, such as the one behind the hip bone.

Put on the pants, pinch the place to be sewn with your fingers, probably loosen yourself a little, after you are sure, you still have to keep pinching it, and then take off the pants, and put it back on (during the period, you have to pinch the place to wear, take a look, so that you can wear it, if you can't adjust it wider), and finally use chalk to draw lines on both sides of the pinched place, and then sew it yourself. Preferably white or blue thread, be sure to sew it tightly. But you can just take it to the sewing place and ask her to measure it for you and then modify it

Fold it near the place where you want it and sew it with a needle!

What should I do if the waistband of my pants is too big? The 20-year-old tailor taught me a trick to close the waistband of my pants without leaving a trace! , life tips, life tips, I hope you will like it, thank you.

Sew the line on the outside of the trouser leg against the waistband of the trousers, it is best to find a professional tailor to do it, it may not look good to do it yourself.

Tips for changing the waistband of the trousers from small to big:Tools: a rubber band, a box of needles and threads, and a pair of scissors to unfasten the button.

1. Method 1.

1. Unfasten the button.

Unbutton the middle of your pants and take a rubber band.

2. Thread the rubber band through the buttonhole.

Slip the rubber band over the clasp and thread the rubber band through the buttonhole.

3. Put the rubber band on the buckle again.

After passing through, fold the rubber band backwards and put it on top of the buckle again.

2. Method 2.

1. Find the middle of the pants.

Find the middle of the back of the waist of the pants and use scissors to cut the area.

2. Thread the needle and thread.

Thread the needle and thread and thread the needle from the bottom to the top through the edge of the cut trousers.

3. Repeat the steps.

Wear it around the hem of the pants and from the bottom up, repeating until all the positions are sewn.

The waistband of the pants is bigger, and the small trick is changed**Tools: needle, thread, scissors.

1. Measure the size of the waist of the pants to be modified, and mark it.

2. Jeans and casual pants can be sewn with needles and threads at the seam of the pants, as long as it does not affect the appearance, how to sew it.

3. If you can't use needle and thread, or if you are in a hurry, you can also use a pin directly to pin it to the waistband of your pants, which is the easiest way.

4. The best way is to add elastic, cut the double-layer waistband, slowly get the elastic in, and then sew it up.

You have to be a professional leather jacket to change. Otherwise, it will be invalid if you change it casually.

You can follow the steps below for this small:

1. Remove the three trouser rings behind the trousers first, and the front and left two do not need to be removed.

2. The waist circumference is only removed from the back piece, and the front piece does not need to be removed.

3. Remove a section of the bone line on both sides.

4. The side bones on both sides are reduced, because the waist circumference is small, of course, the side bones must also be reduced, otherwise the waist circumference will not go up.

5. Mark and stitch the part to be changed.

6. After suturing, cut off the excess part, or not, and put it again to prevent obesity in the future.

7. After changing the waist circumference, change the interface, which is just under the trouser ring, so that you can't see that there is an interface.

Take it out as soon as the hot water is scalded!!

1.Adjust the waist buttons: The waist buttons of the pants can help adjust the waist size. If you find that the pants are too big, try tightening the buttons inwards a bit, which will make the pants tighter and fit your figure.

2.Use a belt or string: Tie a strap around the waist of your pants or thread a collapsing string through the waistband of your pants and tie the ends to the front and back of your pants. This adds tightness to the waist and gives the pants a better fit.

3.Roll up the hems: If you don't care that the waist of the pants fits, but the legs are too loose, try folding the hems up a bit and holding them in place with rubber bands. This will give the leg a better fit.