After the Huawei phone sleeps, it turns on again in a few seconds, what is the problem?

Updated on number 2024-06-12
24 answers
  1. Anonymous users2024-02-11

    Hello, after the phone is asleep, it turns on again in a few seconds, it may be that you have set a timer to turn on and off, or the mobile phone system has failed.

  2. Anonymous users2024-02-10

    A few seconds after the phone is asleep, it turns on again, and the person said that he accidentally pressed the power on and off button, so it will turn off, and then turn on again, and then it is caused by the phone being stuck.

  3. Anonymous users2024-02-09

    If your Huawei phone turns on again a few seconds after it sleeps, it means that you are not really turning off your phone at that time, but just in a dormant state. If there is an application in it, I am opening it, so it will be turned on again.

  4. Anonymous users2024-02-08

    The hibernation function of Huawei phones is set according to the time, and some can enter sleep in 20 seconds, but it will automatically start every time you use it.

  5. Anonymous users2024-02-07

    Now the Huawei phone will turn on in a few seconds after sleeping, this is indeed a problem, it may be that there is a problem with the boot button, you can check it.

  6. Anonymous users2024-02-06

    There should be no problem with this, this one only turns on itself once in a while.

  7. Anonymous users2024-02-05

    This possibility may be that the phone has not been turned off for a long time, if it is not recommended to go to the after-sales service.

  8. Anonymous users2024-02-04

    The phone turned on a few seconds after hibernation, and I thought it might be a problem with the battery, so I was cutting down on repairs before I could get my hands on it.

  9. Anonymous users2024-02-03

    What is the problem with turning on the phone a few seconds after trimming the eyebrows? It's very likely that it's all memory.,The main reason or some soft cause.。

  10. Anonymous users2024-02-02

    In terms of his condition, I think he should be a little hot, you can restart it.

  11. Anonymous users2024-02-01

    If the Huawei phone is dormant, it can also be done through our mobile phone operation in the future, so it can be carried out after some of his system updates.

  12. Anonymous users2024-01-31

    oa phone after hibernation, this you should have some professional introduction about Huawei phone.

  13. Anonymous users2024-01-30

    If you are dormant, if you are dormant together, you can see if you can enter an arithmetic arithmetic to know how to enter the mine?

  14. Anonymous users2024-01-29

    Huawei mobile phone starts to turn on again a few seconds after retirement, what is the problem? I'm able to drive it in about a minute.

  15. Anonymous users2024-01-28

    What is the problem with the Huawei mobile phone turning on the phone in a few seconds after the screen is cleared, this can be found on the mobile phone and computer.

  16. Anonymous users2024-01-27

    The phone turns on again a few minutes after sleeping, what is the problem? I guess that's the reason for that screensaver in this kind of hair!

  17. Anonymous users2024-01-26

    1. After turning on your Huawei phone, tap Settings, as shown in the figure below.

    2. Then in the settings page that opens, click on Battery, as shown in the figure below.

    3. Then in the battery page that opens, find the power saving mode, as shown in the figure below, turn off the power saving mode.

    4. After that, the sleep time can be set, as shown in the figure below.

    5. Click to set the sleep time, such as setting it to never sleep, as shown in the figure below.

  18. Anonymous users2024-01-25

    After the upgraded version, some phones can be set to "never" sleep time, how to judge:

    Please check the screen type of this model in the product parameter interface: LCD screen supports "never" sleep, OLED screen does not.

  19. Anonymous users2024-01-24

    Device model: Huawei Mate30

    System version: 1. Go to the homepage of the phone and find the [Settings] icon.

    2. Open [Settings] and click [Display and Brightness].

    3. Click [Sleep].

    4. After clicking Hibernation, the six options in the following figure will appear. Select your desired sleep time and click on it.

  20. Anonymous users2024-01-23

    After the "Power Saving Mode" is turned on on Huawei series phones, the sleep time will be automatically adjusted to 30 seconds (15 seconds for some phones), so you can resume it by turning off the power saving mode of the phone, and the steps are as follows:

    Materials Required: Huawei Honor 6x example.

    First, open your phone's "Settings".

    2. After entering the settings interface, click "Battery".

    3. Collapse slip with a sliding carry"Turn off the "Power Saving Mode Giving Boy" here, and the two options of "Power Percentage Display Mode" and "Phone Sleep Time" in power saving mode will be grayed out and cannot be changed, and you can see that the "Power Percentage Display Mode" at the bottom is now gray.

    4. After turning off the power saving mode, the "Power Percentage Display Mode" and "Phone Sleep Time" will become changeable.

  21. Anonymous users2024-01-22

    Device model: Huawei Mate30

    System version: 1. Go to the homepage of the phone and find the [Settings] icon.

    2. Open [Settings] and click [Show and Brighten this Tongdu]. Only matched.

    3. Click [Sleep].

    4. After clicking on Senshantan to sleep, the six options in the following figure will appear. Select your desired sleep time and click on it.

  22. Anonymous users2024-01-21

    This limit time can be adjusted.

    1: Open your phone's settings.

    2: Find "Display & Brightness" as shown below.

    3: Click "Hibernation", open it as shown below.

    4: Select a maximum of 10 minutes.

    Note: The maximum sleep time of Huawei phones is 10 minutes, and there is no way to do it longer.

  23. Anonymous users2024-01-20

    You can set the time you want from the settings.

  24. Anonymous users2024-01-19

    Summary. After using your phone, you need to turn off the lock screen of your phone. Sometimes if you forget the lock screen, the phone screen will always be on, so how to set the automatic lock screen of Huawei mobile phones?

    First of all, find and tap the [Settings] function key on the desktop of your phone, enter the [Settings] page, swipe down the screen, find and tap [Display].

    On the display page, you can see a lot of features about the display settings; Press and hold the round button below Brightness and swipe right to increase the brightness of your phone's screen. Swipe left to turn down the brightness of your phone's screen. The brightness adjustment is complete.

    Click the [Sleep] column, and in the [Sleep] time selection box that appears, click to select the automatic lock screen time that needs to be set; If you click [15 seconds], the screen will automatically return to the [Display] page; Finally, return to the Settings page and return to your phone's desktop. In this way, the automatic lock screen of the Huawei phone is set.

    How long does it take for Huawei phones to automatically screen sleep.

    Hello, it's a pleasure to serve you, I've seen your problem. We are querying and summarizing data for you, and we will get back to you right away.

    Huawei mobile phones will not automatically turn off the screen suddenly, the sleep time is 30 seconds, but only the silver travel will not turn off the screen if you don't press the button to turn on and off You can set the phone to open the phone [Settings], tap [Battery], turn off [Power Saving Mode]; Go back to [Display] in [Settings], click [Sleep Friend], and select the sleep time as needed. Since the power saving mode is turned on by default on Huawei phones, you need to turn off the power saving mode before you can customize the screen-off time.

    Dear, Hello, If I'm helpful to you or you're more satisfied, can I give me a thumbs up, your praise or to me is really heavy, and I want Xiaoxue is really serious about answering your questions, I wish you a happy body and mind, and all the best!

    After using your phone, you need to turn off the lock screen of your phone. Sometimes if you forget the lock screen, the phone screen will always be on, so how to set the automatic lock screen of Huawei mobile phones? First of all, find and click the [Settings] function key on the desktop of your phone, enter the [Settings] page, slide down the screen, find and tap [Xiantan Chun Display].

    On the display page, you can see a lot of functions about the display settings; Press and hold the round button below Brightness and swipe right to increase the brightness of your phone's screen. Swipe left to turn down the brightness of your phone's screen. The brightness adjustment is complete.

    Click the [Sleep] column, and in the [Sleep] time selection box that appears, click to select the automatic lock screen time that needs to be set; If you click [15 seconds], the screen will automatically return to the [Display] page; Finally, return to the Settings page and return to your phone's desktop. In this way, the automatic lock screen of the Huawei phone is set.

Related questions
22 answers2024-06-12

The car turns off after a few seconds of ignition may be due to too much carbon deposit, blocked fuel injectors, ignition system reasons, and power supply problems, which are described as follows >>>More

9 answers2024-06-12

There is a problem with the graphics card driver, uninstall and reinstall.

3 answers2024-06-12

1. Introduction: "System Volume Information" is a Windows system folder, and the Chinese name can be translated as "System Volume Label Information". This folder stores the backup information of the system restore. >>>More

14 answers2024-06-12

Look at the specific sound made by **.

There are only a few things that can make sound in a computer: >>>More

8 answers2024-06-12

Viruses are the main cause.

1. Please use the system's built-in system restore to restore to the time when you do not have this failure (or use the restoration software to restore the system, if you can't enter the system, press F8 to enter the safe mode to restore the system). >>>More