May I ask if the bathroom is pasted with floor tiles, will it leak, can it be repaired without destr

1.Toilet leakage repair causes and maintenance methods:

1) Causes of toilet leakage: There are two reasons for toilet leakage, the first is ground water seepage, and the second is water seepage from the upper and lower water pipes.

2) How to determine the cause of water leakage:

The method of judging the water seepage on the ground: as long as the ground uses water, there is water leakage downstairs, and when the ground does not use water, there is no more water leakage downstairs;

The method of judging the leakage of water pipes: the leakage of water pipes is generally large and continuous; Pour water into the floor drain, hand basin, and toilet to judge the water.

If there is no problem with the pipe, if the bathroom has not used water for several days, but there is still leakage, and the leakage has not been alleviated, it is above.

Problems with water pipes. 3) Repair method of leakage water on the floor of the bathroom (note: as long as the water pipe is not broken, you can ensure that the problem of water seepage on the ground can be solved with this method):

1. Treat the dust, oil, and water on the surface, and keep the surface dry;

2. If the tile joint is filled with caulk, you need to use a knife to draw a small groove;

3. In the cement parts such as tile surface, tile joint, wall joint, pipe root, etc., spray permeable waterproofing agent, and be sure to spray evenly;

4. After the waterproofing agent 9 is dry (about 2 hours later), fill all tile joints and damaged and defective parts with caulking paste, and the pipe root is equally thin around it.

Weak links are reinforced with caulking plaster;

5. The connection between the ground and the wall and the pipe root are made of plastic steel mud as a waterproof edge;

6. After the waterproof construction is completed, the construction site cannot be drenched with water within 24 hours.

This may not work, and it must be waterproofed from the ground up.

In modern decoration, people are most afraid of water leakage in the house, and the most dangerous place is the bathroom that often deals with water. Generally, the bathroom will do waterproof work, otherwise the wall of the bathroom will slowly begin to regain moisture and destroy the decoration of the entire wall. If the tile in the bathroom is cracked, it will not cause water leakage.

However, for the sake of safety, we should still patch the cracks.

1. It will not cause water leakage

The bathroom is a place where water is dealing, and a waterproof layer will be made during decoration to prevent water leakage in the bathroom. Cracks in the tiles of the bathroom may be due to errors in the tiles during the decoration, resulting in a gap in the middle of the tiles. Or it is due to the collision of heavy objects, which causes cracks in the tiles.

This condition has no effect on the waterproof layer and will not cause water leakage in the bathroom. If you're unsure, take a closer look at the crack to see if there's any damage inside. As for whether to repair it or not, it still depends on the individual's wishes, even if it is not repaired, it does not matter.

2. How to repair the tiles

Tiles are generally pasted as a whole, and if there is a single crack, it is not recommended to replace the whole piece. In the process of picking out tiles, it may cause problems with other tiles as well. If you want to repair it, we can use some professional glue and apply it to the crack.

Now there is a special seam glue that can fill the cracks, although it still looks like there will be flaws, but there is no need to worry about water leakage. If you feel that the fine seam glue is too troublesome, then we can also use toothpaste instead, and a few more applications can make the cracks in the tiles disappear.

3. Why do tiles crack?

There are many reasons for the cracks in ceramic tiles, such as tile quality problems, tiles not soaked in water, unqualified adhesives, etc. Most of the reasons are when decorating without careful observation. Of course, it is also possible that the wall is cracked, this phenomenon is relatively rare, if this is the case, then it will also have an impact on the waterproof layer.

It is necessary to find a professional construction personnel to re-repair it.

If there are cracks in the tile, it will definitely lead to water leakage, in this case it must be repaired, and it will not leak after repair, in case of future troubles.

The cracks in the tiles of the bathroom are not particularly serious, and it will not lead to water leakage, if there is no leakage, there is no need to repair it, and if it leaks, it must be repaired.

If the waterproofing is not done well, it will still leak, but use waterproof glue to glue it or repair it.

If it is a place where water can be drenched, it must be repaired. Because after a long time, there will be water penetration, waterproofing is not effective, it is best to replace the tiles with cracks, or brush a layer of glue and then brush the waterproofing agent.

If it is a place where the water does not flow, it can be repaired first, and the possibility of water leakage is not very likely.

I hope it can help you, and if you still have questions, click on the avatar and wait for you to tease

The general floor drain and the anti-odor floor drain may not be a uniform size, if the size of the odor-proof floor drain is small, after removing the general floor drain, as long as the extra space is filled with yellow sand cement slurry (before filling the yellow sand cement slurry, the diameter is slightly smaller than the inner diameter of the sewer pipe, plug the sewer pipe, fill the yellow sand cement slurry and then install the anti-odor floor drain, the top end of the wooden stick is about 20 cm above the ground, and the wooden stick is taken out after the cement slurry is slightly dry) If the size of the odor-proof floor drain is larger, just expand the floor drain hole, Careful construction will not damage the floor tiles.

Do you want to knock on the tiles for the replacement of the floor drain of the old house?

From time to time, some people ask, what to do if the floor drain installed in the past is not odor-proof, whether you can replace the floor drain yourself, and whether you want to warp the floor tiles. In fact, if you don't use it, it's not troublesome, and you can change it yourself if you have the ability to do it yourself.

1. Determine the shape and size.

Floor drains are mostly square, but there are also some round styles. If your home is not decorated, it is recommended to choose a square one, which is easier to construct.

The size of the floor drain panel is now the most commonly used is 10*10 cm, and there are also 12 cm and other sizes. If you want to replace the drain, you need to purchase the same shape and size as the original drain.

2. Pay attention to the depth of the sewer pipe.

The mainstream floor drain has two inner cores: T-type floor drain and deep-water sealed floor drain, T-type is relatively short, and deep-water seal is relatively long, you can take a small stick and stick it into the sewer pipe to test the depth. For example, the T-shaped floor drain and deep-water sealed floor drain of Songye's Yejia ** store require an installation depth of 6 cm and 12 cm respectively.

Deep-water sealed floor drain: complete odor prevention, uniform drainage, long life, suitable for toilets and showers;

T-type floor drain: when the water flow is concentrated, the inner core opens and drains quickly, on the contrary, the water flow is slow if the water flow is not concentrated, which can prevent odor, but can not be 100%, suitable for centralized drainage such as washing machine floor drain.

3. Change the floor drain steps.

Use a flathead screwdriver or similar tool to remove cement from the joints of floor drains and tiles, which can be used with a hammer. Gently tap the floor drain to separate the floor drain from the cement.

After the floor drain is taken out, plug the sewer pipe mouth with a plastic bag or cloth to prevent debris from falling, and then clean the cement around the floor drain pit.

After cleaning, re-apply cement putty around the perimeter, and at the same time put the back of the new floor drain on it, and then install the floor drain to clean up the excess cement putty. (The adhesive used for the floor drain varies from place to place, and there are white cement, caulk, glass glue, and some will be mixed with some glue or waterproof coating).

Take a cutting machine and cut a small hole along the brick joint, and then get the waterproof material inside, if it still doesn't work, you can only remove the brick and redo the waterproofing and paving the brick.

This should be waterproof is not done, if the decoration company to the whole, you can find them to deal with, if you install it yourself, you can only take some liquid leak-proof paint to get down, if there is no effect on the bricks can be repaired.

Waterproof paint can be brushed directly. --Water repellent agent.

The first is to renovate the treatment, planing the original tile to the original base layer, repairing the waterproof slurry with waterproof slurry to re-do the waterproof layer, and paving the tile after passing the closed water test. The advantage is that the leakage can be effectively solved, but the disadvantage is that it is expensive and time-consuming.

The second is to cut the floor tiles along the brick joints, and after caulking with flexible primer, you can spray Degaotonic Bike transparent waterproofing agent. The advantage is low cost and short maintenance time. The disadvantage is that depending on the structure and the cause of the water leakage, it may not be able to solve the problem effectively.

1.Find the leakage point and use an instantaneous plugging agent: the common part that is easy to leak is around the pipe mouth, if it is determined that the leakage occurs around the pipe mouth, you can use waterproof materials such as water leakage to plug the leak to solve the problem.

2.Another situation is the leakage of the mortar layer, and the treatment method is: (1) Grouting waterproofing from downstairs to the ceiling

Use the grouting machine to drive the grouting waterproof material into the concrete inside to expand and stop water, fill the concrete void to achieve the purpose of waterproofing, this method can be solved from downstairs without destroying the tile, but the ceiling of the downstairs ceiling needs to be removed, and the building must be a concrete pouring structure.

2) Use the kitchen and bathroom without smashing the brick waterproof agent for waterproof plugging construction: clean up the gaps of the tile, and then use the kitchen and bathroom without smashing the brick waterproofing agent for waterproof plugging construction, because the tile itself has a very low permeability, if the surface of the glazed tile will not be permeable, the general water seepage is infiltrated from the tile gap, through the gap of the mortar layer to produce leakage, the kitchen and bathroom do not smash the brick waterproofing agent can react in the mortar layer to form a colloid or crystal, play a thorough waterproof and plugging role.

Buying a small bag of waterproofing agent is actually high-grade cement pre-mixed with very fine quartz sand. About 1 kilogram, 15 yuan. If the color of the cement is dark and affects the overall appearance of the bathroom, there is also a white tile caulk, which looks the same as white ash, and is produced in Tianjin, a small bag of 10 yuan a kilogram.

Both are similar in terms of usage: mix them with water to form a sticky paste and rub them over the gaps. Finally, use your index finger to wipe it, and then stick it to the tile next to it and wipe it off with a dry rag after it dries slightly.

After a little waiting, the water gradually decreases and there is no need to repair it. The trend is not reduced, and it needs to be repaired, but don't be so blind when repairing, carefully suppress and test the water, and only after determining can the wall or ground be restored.

Bathroom leakage is a big problem, mainly affecting the life of your downstairs neighbors, at present, the best way is to find a professional waterproofing to knock the floor open, do a new waterproofing, don't look for guerrillas, which is to fool people, find friends to introduce it.

The solution: if the sewer pipe is cracked, replace it, if it is a crack in the floor tile, you can apply silicone, so that you don't have to smash the floor, but applying silicone is not a long-term solution.

You can remove the tiles in the waterproof part of the door (you can extend inward to remove a few more pieces) and redo the waterproofing. Then do a 24-hour water storage test, the water storage height is the highest 20 30mm, if the inspection is qualified to carry out the laying of tiles, pay attention to the new waterproof layer must be protected in the paving process, so that we can avoid the second water storage test. However, if the water storage test shows that the waterproof layer is still leaking, then there is no way you have to remove all the bathroom floors and re-waterproof.

Thorough method: remove the floor tiles and the bottom layer of wall tiles, remove the floor tiles to expose the original ground, do it with two-component waterproof mortar, and then do a 24-hour closed water test after doing it well, check whether there is water leakage downstairs, and continue to do it until there is no leakage.

How to deal with water leakage:

1.Cleaning: All clean, no obvious floating ash, oil stains, etc., it is required to be clean, tidy and dry!

2.Filling: Use cement mortar, or grout, or plugging agent, put all the pipes, around the floor drain, focus on cleaning, and then fill. The four sides connecting the wall with the ground should also be filled, which is required to be flat, smooth and dense!

3.Splashing: Splash the anti-seepage patch agent on the ground, and then scrape it around with a brush, or wooden board, or scraper, and require the anti-seepage patch to reach and cover every part of the terrace, absorb evenly, saturate, and no omission!

4.Wipe dry: After 30 minutes or 1 hour, wipe off any excess anti-seepage refiller that remains on the surface!

5.Curing: Within 12 hours, it is required to rinse and soak without open water! After 36 hours, you can test the water!

The main features of anti-seepage fillers:

1.No smashing bricks, no planing bricks, no change in appearance: anti-seepage filler is completely colorless, odorless, volatile-free, environmentally friendly, completely non-destructive construction, and there is no change in the appearance after construction and before construction!

2.Reliable leak repair and waterproof effect: 100% leak filling, 100% waterproof, the effect is immediate, and the waterproof life can reach 20 years!

3.The construction is simple, labor-saving, labor-saving, and money-saving: the material cost is low, the construction cost is low, and the comprehensive cost is a few tenths of other ways and methods.

Either don't drench it anymore, or remodel: dismantle, redo, restick. There's no other way.

First of all, you have to know where the water is leaking, generally the water leakage is at the interface of the upper and lower water pipes, because the raw material belt or hot melt is less or the pipe hoop is not tightened. After figuring out that part is leaking, you can only smash one or two tiles from this part, and then paste the tiles after repairing the pipe.

Bathroom leakage should be a relatively complex problem in household water leakage. There are three sources of leakage in the bathroom, one is inlet water leakage, one is sewer leakage, and one is base surface water seepage.

If it is a problem of water ingress and sewer leakage, it is generally more likely to be excavated. If it is water seepage on the substrate, then it should be solved by doing some professional treatment, and there is no big impact on the appearance.

At the same time, since the water has leaked downstairs, the waterproof layer of your home is no longer reliable. Knowing this, you should be cautious in your repairs.