Steps to reinstall the system on an ASUS desktop computer USB flash drive

Hello. ASUS computers are very good in terms of quality and reputation, now there are a lot of users who use ASUS computers, we know that there are often some system failures in the process of using computers, and even the problem of not being able to turn on, at this time, if you want to reinstall the system, you need to use a USB disk, in view of the fact that many users do not know how to use ASUS to reinstall the system with a USB disk, here I will teach you the steps and tutorials of ASUS computers to reinstall the system.

ASUS desktop computer pre-installed win8 to win7 steps.

1. Reload and prepare.

1. ASUS laptop or desktop.

2. Make a backup of the C drive and desktop files.

A G size U disk to make a U disk PE boot disk.

Part 2: The tutorial for reinstalling the USB flash drive of an ASUS computer is as follows.

1. First make the U disk into a PE boot disk, and then use the decompression software to extract the GHO file in the system image to the GHO directory of the U disk;

2. Insert a USB flash drive into an ASUS computer, press ESC (notebook) or F8 (desktop) to bring up the boot menu during the reboot process, select the recognized USB flash drive name, and press the enter key;

3. Start from the U disk and select Run PE System in the main menu;

4. Open the PE one-click installation in the PE system, keep the default settings, and then select the location C disk to be installed, and click OK;

5. Go to this interface and perform the decompression operation of the system;

6. Then the computer will automatically restart and start the system reinstallation operation;

7. The next steps are all automatic, just wait for the reinstallation to be completed.

The above is the tutorial of how to reinstall the system with a USB flash drive for an ASUS computer, if you encounter the problem of ASUS system crash, you can use the above methods to reinstall.

Good luck.

You can take a look at the USB flash drive reinstallation system.

ASUS motherboards can be set up to boot the system by following the following steps:

1. When you see the boot screen, press the "DEL" button continuously to enter the BIOS setting interface. As shown in the figure below:

2. At this time, we press the "F8" key, and we will enter the startup menu selection window, as shown in the figure below

Through the above steps, you can select a USB flash drive to start the installation system.

The USB flash drive mounting system is one of the easiest installation methods. So how do you use a USB flash drive to reinstall an ASUS computer? In the following, I have shared the ASUS computer USB flash drive reinstallation system'method, I hope it will be helpful to everyone.

1. First of all, make the U disk into a U depth U disk boot disk, then go to the relevant **** win7 system and save it to the U disk startup disk, restart the computer and wait for the boot screen to appear, press the startup shortcut key, select the U disk to start into the U depth main menu, select the "U depth win8 PE standard version (new machine)" option, press the enter positive punch key to confirm, as shown in the following figure:

2. Enter the win8pe system, the installation tool will pop up by itself, click "browse" to select the win7 system image file saved in the u disk, as shown in the figure below:

3. Wait for the U deep PE installation tool to automatically load the win7 system image package installation file, just select the installation disk location, and then click the "OK" button after the bridge is cracked, as shown in the following figure:

4. At this time, click the "OK" button directly in the pop-up prompt window, as shown in the following figure

5. Then the installation tool starts to work, we need to wait patiently for a few minutes, as shown in the figure below

6. After completion, a prompt will pop up to restart the computer, click the "Yes (Y)" button, as shown in the following figure

You need to bring your own win10 installation disk (U disk).

Reboot, when the boot logo appears, you can continuously click ESC to select the startup item (the product line is different, the entry shortcut key of the startup item is different, ASUS notebook is pressed ESC, desktop or motherboard is pressed F8).

Windows 10, like Windows 8, supports UEFI or non-UEFI boot (Windows 7 does not support UEFI boot).

For this installation of Windows10, we recommend choosing UEFI mode boot, so that the subsequent division is a more advanced GPT format, if you choose non-UEFI mode boot (the fourth item in the figure below), the subsequent partition format is MBR, and up to 4 primary partitions will be created.

Install the system. After selecting Start USB flash drive in the startup item, the boot image begins.

Once you've selected settings such as language, keyboard, etc., select Next

Click "Install Now".

The installer is starting.

In the stage of verifying the key, you can enter the key directly, or you can choose to skip it temporarily.

Agree to the license terms.

Select Custom

Next, partition, [Windows 7 needs to click "Drive Options (Advanced)"].

Click New to allocate the size of the C disk, here 1GB=1024M, and allocate the size according to your needs.

If you need to allocate 100GB for the C drive, then it is 100 1024=102400, and in order to prevent it from becoming, you can add 5-10MB more

Here divide the 127GB hard drive into a partition, click New and click Apply.

Windows will automatically create a boot partition, select OK here.

After the C drive is created, the system retains the disk in the middle of the system in the early vertical mode, so you don't have to worry about it. This partition will be automatically hidden after the system is done, then select the path of system C installation, and click Next.

If you have a lot of areas, don't choose the wrong installation path.

Files are being copied and prepared, and most of the next stages are automated.

The following diagram is a step that is completed automatically, and the receiver will automatically restart when he comes down.

Windows will restart automatically, and the USB flash drive can be unplugged at this time.

Windows still loads the process automatically after restarting. During this period, it will be restarted several times, and the setup is being prepared.

When it is ready, it will restart, and it is time to verify the product key, and you can enter it directly if you have a key, or you can temporarily choose to talk about it later.

Quick to get started interface, choose to use Quick Settings.

Wait a moment. <>

At this point, the system is almost installed, create an account and password for this computer, and leave the password blank means that you have not set a password.

Next, the Windows settings are applied and wait for the final configuration to be prepared.

Windows is installed, so please enjoy it.

Automatically jump to the desktop.