How is the ceiling installed? What should I pay attention to?

It is believed that many new house decoration involves the process of the ceiling, and the materials used in the ceiling are keel and gypsum line, which are indispensable. And how is the house ceiling installed? In fact, it is to deal with the base layer first, then locate the pay-off, then install the main keel, and finally install the gypsum line.

In the process of installation, we must pay attention to the process problem, and at the same time pay attention not to buy fake and shoddy products, otherwise the installation effect is very poor.

First, the installation method of the ceiling.

In fact, ceiling construction is the simplest of all housing construction, first of all, we have to clean the base of the ceiling, remember not to get wet, and then we have to position the line, the purpose of this is to make the ceiling construction more beautiful, but also to know the size, so that it is convenient to install, the positioning of the line after the installation of the keel, and the keel is to set off the gypsum line, so the keel must be installed, and adhere to the reliable, the last step is that we install the gypsum line, In the installation of the gypsum line, we must install the whole piece, so that the installation effect is the best. <>

Second, the ceiling construction should pay attention to material problems and process problems.

In the construction process of the house ceiling, the materials we use must hold a certificate of conformity and other certificates, especially the keel and gypsum board these two materials must be purchased in a regular store, if you buy fake and shoddy products, then the quality effect is not very good. Also pay attention to the problem is the process problem, we must remember to clean the base layer of the ceiling before continuing the next process construction, remember not to do the process in reverse, otherwise you will not be able to install the gypsum line. <>

3. Summary. In general, the construction of the house ceiling is actually very simple, to install a good-looking and practical ceiling, then we must consider many aspects in the selection of materials, you can choose those gypsum lines without patterns, so that the installation effect is very good. For house decoration is a major event in life, so in the decoration process must go to see more, at the same time, you can also learn from other people's decoration style, and then appropriate modification is also very good.

The house needs to be fixed first, and then the panels need to be fixed so that the ceiling can be installed. It is necessary to pay attention to the protection of the wall, the way of fixing, the firmness of fixing, and the protection of the installer.

The ceiling is generally built in the room, the height and width of the ceiling are measured, and the frame is built after the specific value is obtained, and then the ceiling is cut into a certain shape and laid. It is necessary to pay attention to the selection of appropriate materials in this process, and to do a good job of moisture and waterproof.

Inspect the roof surface, if the inspection is qualified, the elastic line should be positioned, and then the boom should be fixed, and the keel should be installed in the last step; It should be noted that the keel is divided into the main keel and the secondary keel, and the main keel should be pressed first when installing, and preparations must be made before the construction of the ceiling to ensure that the ceiling can be carried out smoothly.

I believe that many new houses will encounter such a problem when decorating, that is, how to be simple and practical when the ceiling of the house is suspended? The material required for the installation of the ceiling is nothing more than the gypsum line, as long as the gypsum line used in the decoration is selected, and this gypsum line we can choose the kind of relatively simple, straight lines, so that the effect of the installation is simple and practical, and it is also very good-looking, but in the installation process, we must pay attention to the process of the material problem.

First, it is very important to choose a good gypsum line.

If you want to decorate your own house ceiling is simple and practical, then we should pay great attention to the selection of materials, and the material applicable to the ceiling is nothing more than gypsum line, we choose the gypsum line can choose the kind of no pattern, so that the installation is convenient, and the effect of installation is also very good, compared with those gypsum lines with patterns, this kind of gypsum line installation is not so good-looking, and the practicality is not strong. <>

Second, pay attention to material problems and decoration problems.

Now many gypsum lines on the market are inferior products, so we must buy materials in regular merchants, so that our gypsum line can be used longer, and the strength and hardness are up to standard, there will be no gypsum line due to quality problems in the process of the house ceiling, there is a problem is very important, that is, the process problem, we must remove the surface of the base layer when we hang the ceiling, and the gypsum line must not be wet. So that we can install it later. <>

3. Summary. In fact, the ceiling is a very simple decoration process, as long as you choose the right materials, do the right tools, I believe that the ceiling you install is simple and good-looking, after all, decoration is a big thing in life, so the owners and friends must put more thought and effort into the decoration of the house, so that we will install the house will be more beautiful, people will live in it will be more comfortable. <>

To make sure that there is no water leakage in the installation place, to ensure the smoothness of the infrastructure, and to check the strength of the installation place, to consider whether your house is suitable for the installation of the ceiling, if the house is relatively low, it is not recommended to install the ceiling, because this will cause people to feel nervous and depressed.

When installing a suspended ceiling, you need to decide according to the space in your home. Pay attention to the way of installation, but also pay attention to the distance of installation. Also pay attention to the style of the home, but also pay attention to the size of the space, but also pay attention to the effect after installation.

Gypsum strip ceilings can be installed. It should be noted that the height of the ceiling should not be too high, and it should be installed firmly, otherwise it will be more dangerous.

1. Corner line installation.

The first step in the installation of the ceiling is the installation of the corner line. The installation of the corner line is to determine the installation height and installation level of the ceiling, and also to pave the way for the next keel installation to facilitate the follow-up work. Therefore, you must be careful when installing the corner line, if the corner line is tilted, then the entire ceiling will be tilted.

2. Screw installation.

After determining the installation height and installation level of the ceiling, we need to install the screws. In the installation of the ceiling, there are six screws that will carry the weight of the entire ceiling. When installing the screw, we should pay attention to whether the installer is making a hole without affecting the installation of the electrical appliance.

3. Keel installation.

Keel installation can be said to be the most important part of ceiling installation. Because the keel is the load-bearing object of the entire ceiling gusset, it is also the key to modeling. Popular science about the installation of keel:

Generally, the distance between the booms is 300-1200mm, and the arch is arched according to the short span of the room 1%-3%; The distance between the main keels is 600-900mm; The distance between the auxiliary keels is not more than 600mm. So when installing the keel, be sure to check whether the keel installation meets the standard.

4. Install the gusset.

The gusset is the part of the ceiling that we can see when we look up. After the gusset is installed in the keel and the electrical port is reserved, it can be installed with reeds. When installing the gusset, the installer will install it in the direction of the arrows on the membrane on the four sides of the gusset.

Generally speaking, the gusset of the first row will be cut with a utility knife so that it will be both beautiful and stacked. The cut will also be made against the wall and will not be exposed.

5. Electrical installation.

The ceiling is basically installed, and it is time to install the appliances. Electrical appliances are generally heavier than gussets, so they need to be fixed with screws to prevent them from falling. Before installing the electrical appliances, tell the installer to reserve the height required by the electrical appliances to facilitate future use.

After installation, it is also necessary to check whether the gusset is flat and whether the electrical appliances can be used normally. After doing this, the integrated ceiling is successfully installed.

What material is good for suspended ceilings? 1. Balcony ceiling, closed balcony can be made of plastic steel plate, can also be used light steel keel gypsum board, and unclosed balcony can use sauna board.

2. The ceiling of the living room, the villa must be made of light steel keel gypsum board, and the wooden keel gypsum board ceiling is used for neutral or small living rooms.

3. The kitchen ceiling can be made of plastic gusset, which is convenient and simple to clean.

Nowadays, many people generally choose to install suspended ceilings for home renovation. What are the installation steps of the suspended ceiling? Let's take you to understand the lack of bars.

1. Determine the size.

Before the installation of the ceiling in the living room, you need to draw the dimensions of the ceiling, then fix the position on the roof, then use a percussion drill to punch holes, and finally fix the large keel with expansion screws.

2. Make a good skeleton.

Next, the skeleton on the ground is supported on the ceiling, the square bar is used as a fixed column, and the horizontal and vertical lines are played to fix the skeleton, and the excess skeleton is sawed off according to the size of the drawing.

3. Fix the gypsum board.

The next step is to fix the gypsum board, it is recommended to use a cross to support the gypsum board on the ceiling, fix it with screws, and the excess gypsum board needs to be removed, so that the ceiling is almost ready to be next to it.

4. Beautify the ceiling.

After the plasterboard is fixed, it can be carried out for beautification. For example, paste gauze on the gaps of the gypsum board to avoid shrinkage and cracks, fix decorative lines on the edge of the ceiling, and finally apply putty powder or other decorative materials. The result is a fabulous suspended ceiling.

The ceiling is nothing more than a few major items, the edge bar must be fixed to prevent cracking, the suspension bar must be hung after the appropriate amount of heavy object test, to ensure the quality, anti-corrosion paint is very important, the ceiling plate should pay attention to the selection of regular products, there are quality problems to maintain trouble, the seam treatment after the ceiling must be fixed with a bandage, otherwise the seam will be cracked.

In the ceiling ceiling decoration, the vast majority of them are using the suspended ceiling, this ceiling decoration scheme should first pay attention to the selection of materials, and at the same time strictly operate in accordance with the construction specifications, the installation must be in the correct position, and the connection is firm.

The choice of materials, and anti-corrosion requires special attention.

"The installation of the ceiling adds bricks and tiles to the top of the home, and the ceiling materials commonly used in the living room are wooden plywood, paper plasterboard, decorative gypsum board, plastic gusset, aluminum gusset and plastic organic light transmission board.

Craft practice The general living room is directly decorated on the floor, so many decorative means of the wall are suitable for the ceiling. In order to achieve decorative effects and set off the atmosphere, some families need to make suspended ceilings in the living room in order to insulate and cool down, or to cover up the shortcomings of the original roof. In order to prevent steam from invading the ceiling, reduce the space, facilitate heat preservation, and conceal the upper and lower water pipes, the bathroom must be treated with moisture.

Acceptance method 1, the variety, specification, color and base structure and fixing method of the materials used in the ceiling project should be in accordance with the design, household requirements, and in line with the current standards.

2. The ceiling keel shall not be twisted or deformed, and the installed ceiling keel shall be firm and reliable, and the allowable deviation of the surrounding level shall be 5mm.

3. Light lamps and lanterns can be hung on the main keel, and lamps or ceiling fans weighing more than 3kg shall not be connected with the ceiling keel, and should be hooked separately.

4. The ceiling cover panel and the keel should be tightly connected, the surface should be smooth, and there should be no defects such as pollution, cracking, missing edges, falling corners, hammer wounds, etc., the joints should be consistent, the pressure strip should be straight, no warping, and the junction between the cover panel and the wall, curtain box, lamps and lanterns should be tight.

5. The gypsum panel on the paper surface is generally fixed on the keel with galvanized screws, and the nail head should be coated with anti-rust paint. The pasted cover shall not be delaminated, and the shelved cover panel shall not be leaking, penetrating or warping. "

The screw of the ceiling has 6 mm and 8 mm, it is nothing more than these two, usually, it is the use of impact drill and ceiling screws for drilling, and then after installing the expansion bolt on the ceiling screw, the installed expansion bolt is penetrated from the hole of the ceiling bolt, and finally the expansion bolt can be tightened.

The boom is on the top, connected to the light steel keel, stuck on the auxiliary bone, and then used the self-tapping screw to adjust the top.

What do you say about installing suspended ceilings?