How to make a suspended ceiling? What should I pay attention to?

How to make a suspended ceiling: go to the market to choose raw materials, woodworking board or gypsum board. Plank these.

Accurate measurement, pay-off, according to the design plan to do a good job of preparation before the construction of the project. Assemble the trim strips. Crop according to size.

Punching, punching holes where exactly what is measured. Never drill through the concrete floor slab. Punch in the wedge, and the plank is nailed to the wedge.

Be sure to nail it thoroughly. Nail the main keel. Hit multiple nails.

In this way, assemble all the tops. The assembly of the main keel is carried out.

The assembly of the main keel is carried out, and anti-corrosion and fireproof materials should be brushed. This is a process that many construction units ignore. Assemble it on the control panel and assemble it at the corners.

Be sure to add screws to tighten tightening. If you don't assemble the control panel, but a decorative ceiling of woodworking board or gypsum board, you must batch putty. The final renovation of the ceiling was carried out.

Unique. It's complicated and complicated, but it's simple to say. The key is whether you take those items seriously.

There are many kinds of materials for decoration ceilings, and the one that is more used on the market at this stage is the integrated gusset, which is the key to the toilet and restaurant kitchen at home.

Precautions: special screws should be used when assembling: there are many homes where the nail hole is exposed after the decoration ceiling is not long, which is also caused by the fact that the nail hole is not coated with anticorrosive paint, and the rust stains are caused by the return of moisture.

The use of special anti-rust treatment screws, coupled with anti-corrosion paint solutions, will give home furniture decoration ceilings a more reliable guarantee. Solve the interface: the appropriate gypsum line joint solution plays a key role in preventing the cracking of the decoration ceiling.

As a result, it is recommended to apply special seam tape and gypsum line-specific caulking paste. Traditional old processing techniques, such as the application of wrapping paper, transmission belts, and double flying powder, are unreliable and unenergy-saving and environmentally friendly.

Do a good job in the solution of the yang angle line: the straightening and smoothness of the yang angle line immediately affect the beauty and generosity of the decoration ceiling, therefore, it is best to choose a special type of seam tape to cooperate with each other and apply a special type of caulking paste to solve the yin angle line. Use metal material corner protection strips to cooperate with each other and apply special caulking paste to solve the yin and yang angles, which not only straightens the yin and yang angles, but also has good maintenance for the yin and yang angles, so that the decoration ceiling is also excellent in small details.

When making a suspended ceiling, it is necessary to choose according to the overall decoration style and lighting; It should be noted that when installing the ceiling, it is necessary to choose different materials according to the moisture resistance of the room, you can choose gypsum material or keel material.

You need to find some light wiring first, and then fix it with drywall, and then you can drill the hole. Pay attention to the way of layout, but also pay attention to the pattern, pay attention to the space, but also pay attention to the height, but also pay attention to the mode of design.

If you want to make a ceiling, then I think you still have to find a professional master, after all, interlacing is like a mountain, so you must explain your requirements to others when making a ceiling.

It is necessary to decorate the ceiling, it can make up for the defects of the interior roof, and cover the interior decoration base more beautifully. Let's take a look at your own ceiling method, what do you have to do to make a ceiling?

Self ceiling method 1Preparation for construction.

1. Construction preparation.

Before the ceiling, it is necessary to install various pipelines and equipment in the ceiling, and determine the position of the lamp position and hole position of the indoor top lighting, as well as the location of the vent, and then the roof construction operation frame is built.

Self-suspended ceiling method 2Preparation of materials and tools.

The materials and tools must be prepared for the ceiling, the main materials are aluminum alloy ceilings, keels, booms, etc., and the tools are more than Hu keys, including broken lines, ink fountains, hammers, levels, angle rulers, hanging wire hammers, nail guns, planers, screwdrivers, impact drills, toothless saws, hacksaws, etc.

Self-suspended ceiling method 3Installation process.

a. Spring line. Use elastic line techniques to mark each position, especially mark the horizontal line, height, and center point of the room, and draw the keel binning position line at the center point of the room.

b. Install the main keel boom.

After playing all kinds of lines, according to the elevation of the lower end of the boom, install the boom with a diameter of 8 round steel, fix it on the ceiling with a diameter of 8 expansion bolts, and the spacing of the boom is controlled within the range of 1200mm.

c. Install the main keel.

C38 light steel keel or wooden strips are selected, the spacing of the main keel should be within the range of 1200mm, and the installation only needs to connect the hanging parts of the main keel with the boom.

d. Install edge trimmers.

Then you can fix the edge strip with cement nails around the wall, and the spacing of cement nails is not more than 300mm.

e. Install the secondary keel.

Install the secondary keel that is matched with the plate, the secondary keel is hung on the main keel by the hanging piece, if the length of the secondary keel needs to be extended by more than one root, the secondary keel connector is used to connect the relative end, and is straightened and then fixed.

f. Install metal plates.

Pull a reference line in the direction of the vertical secondary keel in the middle of the assembly area, align the baseline line to install the metal plate on both sides, handle it gently when installing, press the two sides of the square plate lightly along the order of the flanging part, and then push it tightly after being stuck into the keel.

g. Cleanup. Then wipe the surface of the board with a cloth, and there should be no dirt and handprints.

h. Acceptance. If you have your own ceiling, then you can accept it or not, provided that the quality is ***.

Suggestions from designers of Grad ceilings:

Modern people are more and more interested in the decoration of the ceiling, so the ceiling design is becoming more and more exciting, each of which can create different decorative effects. Here are a few tips for ceiling design for your reference. 1. In order to make all this shrouded in bright light, the designer specially reserved space on the ceiling to install lamps and lanterns to make the lighting of the restaurant brighter.

2. The ceiling shape of the light wood color in the unified style is to match the laminate parquet design of the ground and coordinate with the cabinets. However, the designer hollowed out the original cement ceiling, and then inlaid wooden planks and installed lamps, and the whole ceiling shape looked lively and generous. 3. The layers are clearly around the irregular ceiling, surrounded by blue sandblasted glass light troughs, which adds a layer of liveliness to the original highly varied ceiling.

4. Straight and curved designers use calcium silicate boards and decorative panels to make the ceiling shape sound and colorful. The contrast between white and wood, the echo of straight lines and curves, presents a variety of facets in the space. 5. The white ceiling is decorated with classical gypsum board and the intricate chandelier to enrich the originally empty ceiling.

6. Herringbone roofSome houses will have a traditional herringbone roof, which is wrapped with wooden boards like this and designed in the style of ancient eaves, which can bring a strong sense of simplicity to the space. In fact, the designer just used a veneer with wood grain, which is not only lower, but also fireproof. 7. The circular ceiling is inlaid with fluorescent tubes in the glass ceiling, and the circular shape is matched with the spiral staircase, which is unique.

If you buy a suspended ceiling, I personally think that it is still good for Grad, and the country is ranked among the top brands. The ceiling must be bought well.

With the improvement of the quality of life, people's requirements for home decoration are getting higher and higher. We all know that a good ceiling design can not only ensure beauty, but also make full use of space, which can make the home space more spacious. So, how to do the design and decoration of the ceiling to achieve such an effect?

a) Suspended ceilings. About how to suspend the ceiling, the ceiling installation of different materials and different spaces is different, but everything is the same, here is a list of several key points to pay attention to in the installation of the ceiling:

2) Preparation before installation.

Before the installation of the ceiling begins, it is necessary to check again to confirm whether the structural dimensions are consistent with the design drawings; Whether the pipelines that need to be hidden have been installed and passed the inspection.

Check these matters well, check the roof appearance, do not meet the construction requirements, to take remedial measures in time before the installation of the ceiling.

3) Spring-line positioning.

The elastic line positioning mainly includes the elastic ceiling elevation line and keel layout grid positioning, which is a basic work for ceiling installation. The elevation line can be marked with the water column method to mark the position of the ceiling plane, and then the elevation line is popped up according to the position; The positioning of the keel grid needs to be determined according to the size of the veneer and the arrangement of the keel grid. In order to facilitate the installation of the two keels, the spacing size of the centerline is generally about 2mm larger than the size of the veneer.

The layout of the keel grid should be as smooth as possible to ensure the uniformity and integrity of the keel grid to ensure that the ceiling has a regular decorative effect. First draw the ceiling area on the paper according to the proportion, and then arrange the ceiling keel on the paper according to the principle of keel arrangement. Once you have decided on the location, draw the location on the wall.

4) Fixed boom.

The boom is used to hang the keel, and the angle steel block must be fixed with expansion screws or nails. There is a hole for the rotor to fix the hanger on the angle steel block, through which the galvanized iron wire is tied to the hanger for hanging the keel.

There are also keel hangings without wire telescopic booms, telescopic boom types are abundant, but at present, the No. 8 lead wire is commonly used to straighten. It is mainly to connect the two lead wires with a spring steel sheet with holes, and the adjustment and fixing mainly rely on this spring steel sheet.

5) Keel installation.

The keel is divided into the main keel and the secondary keel, and the correct order is to lift each main keel first, find the elevation line, and fix it at a position slightly higher than the elevation line. Some spaces require a large area of the ceiling, which can be divided into several parts and hoisted in turn. After the main keel is installed, install the secondary keel between the main keel.

Before installing the secondary keel, the length should be measured, and in order to ensure the accuracy of the data, it is best to use a die gauge to measure. When installing, use a mold gauge to determine the spacing between keels.

On how to best decorate the ceiling, this article summarizes 5 points, one is the choice of the ceiling, according to the home space and style to choose, the second is the preparation before installation, to check and confirm whether the structure size and the design drawing are consistent, the third is the elastic line positioning, to determine the size of the lamp veneer and the layout of the keel grid, the fourth is to fix the boom, to use the No. 8 lead wire straightening, the fifth is the keel installation, to measure the length first, and then install.

Ceiling decoration is a very important part of interior decoration, which can not only beautify the indoor space, but also hide pipelines and wires to improve the overall decoration effect. So, how to carry out ceiling decoration?

The specific decoration of the house** can be counted here, just enter the area + city, calculate the decoration in 3 seconds**, know the real ** in advance, and easily grasp the decoration company: [Click here, free decoration**].

First of all, it is very important to choose the right ceiling material. Common ceiling materials include gypsum board, aluminum gusset board, PVC board, etc. Gypsum board is the most common ceiling material, which is relatively low and suitable for general home renovation.

The aluminum gusset has the characteristics of fireproof, moisture-proof, anti-corrosion, etc., and is suitable for humid environments such as kitchens and bathrooms. PVC board has the characteristics of waterproof, moisture-proof, fireproof, etc., and is suitable for humid environments such as toilets and bathrooms.

Secondly, choose the right ceiling shape according to your needs. The ceiling shape includes flat ceiling, ceiling keel, ceiling line, etc. Flat ceilings are the most common ceiling shape and are suitable for most indoor spaces.

The ceiling keel can add a sense of hierarchy to the whole and is suitable for large spaces such as living rooms and dining rooms. Ceiling lines can add to the overall decorative effect and are suitable for intimate spaces such as bedrooms and dens.

Finally, budget based on local market prices. The ceiling decoration varies from region to region, generally speaking, gypsum board is 50-100 yuan square meters, aluminum gusset is 100-200 yuan square meters, and PVC board is 150-300 yuan square meters. In addition, you need to consider the cost of installing ceiling materials and other Qi Burn or auxiliary materials.

To sum up, ceiling decoration is a non-negligible part of interior decoration. Choosing the right ceiling material and shape, and budgeting according to the local market price, can help you achieve the ideal ceiling decoration effect.

Finally, it is recommended to recommend our "Tuba Rabbit", Tuba Rabbit has 110,000 decoration companies and first-class businessmen in his hands, and the direct sales of building materials are affordable. Tuba Rabbit is selected for decoration, and Tuba Rabbit can accompany the signing of the contract for free, "decorate first and then make payment", reducing the worries of the owners. For more decoration information, welcome to visit:

Click to enter, professional customer service free consultation good company].

1. What are the precautions for decorating the ceiling?

1. It is best to choose light steel keel installation in the case of both wooden keel and light steel keel, because the expansion and contraction range of wooden keel is relatively large, which will make the overall structure easy to deform, and the expansion joint should be paid great attention to during design and construction.

2. Each joint of the keel should be left with an expansion joint, and the seam should be poured into a 45-degree angle, whether it is the installation of light steel keel or wood keel installation, their spacing must be standardized, to ensure that the bearing capacity of each self-tapping nail is close, otherwise it is easy to have a side lock reaction to make the structure lose stability.

3. If the space of the house is wide and the floor height is relatively high, then there can be many types of ceilings to choose from, such as gypsum sound-absorbing panel ceilings, fiberglass wool ceilings, plywood ceilings, etc., which are very suitable for both good decorative effects and sound-absorbing functions.