What are the issues that need to be paid attention to when installing waveguides?

Waveguide, lace or edge line refers to the pressure line at the boundary of the tile mosaic in the dining room and living room, or the decorative line around the floor wall such as porch and walkway. In general, people don't pay attention to it. Some people often think that it doesn't matter or even necessary.

However, this is not the case. If the edges are done well, they tend to bring different effects to the decoration of the room, making the whole room flexible. If we decorate the floor of the room with a type of tile, we don't want to add too complicated paving and mosaic effects.

If we add a flexible waveguide, the floor of the room will be more vivid.

If the baseboard is installed first, the floor tiles, wavy lines and door stones will be surrounded by the baseboard and a single joint will be exposed. Dark, monochrome waveguides can be used to enclose the edges of spaces with uneven edges. To enhance the sense of cohesion in the space, fancy lines or monochrome waveguides can be used to form squares and leave the surrounding space blank.

If possible, the middle should be a complete floor tile as much as possible. If you want to create a certain sense of direction, you can alternate between waveguide wires and plain square floor tiles. Furniture is placed in the home.

If furniture such as sofas and TV cabinets occupy a special location, we must pay attention to their footprint. If the footprint is too large, it is not recommended to use a waveguide wire as it does not make sense.

Some people make waveguide wires in the living room so that the floor of the whole living room does not look very monotonous. With the decorative function of waveguides, the living room will look even more beautiful. Divide the space.

In addition, the waveguide also serves as a partition between the space, the corridor and the living room, etc. Through the waveguide, you can feel that these are two different spaces.

It can save tiles to a certain extent, and installing waveguide wires can save tiles comparatively. The width of the waveguide wire is controlled at 10-20 cm, which is the most beautiful. Depending on the actual situation, it can be appropriately relaxed, but the maximum should not exceed 25 cm.

The design is located on the ground level**. This method usually lays a large area of tiles around the corners of the wall, from the outside to the location of the waveguide, then follows the design drawing, and then continues to lay tiles in the remaining places.

It is necessary to cut and splice the tiles, and then pave them, and then you need to sprinkle the grout on them, and then you need to make adjustments.

It is necessary to pay attention to the embellishment of the level, the installation of the corner, the way of installation, the details of all aspects, the operation process of the installation, and the preparation of the tools that need to be used.

We must pay attention to the problem of length, pay attention to the treatment of details, we must pay attention to the cleaning of these garbage, we must pay attention to the degree of firmness, and we must pay attention to the treatment of gaps.

1. What is a waveguide line? The waveguide wire is a bit similar to the ceramic tile, and it is also a product in the tile, and the waveguide wire is generally darker in color. There are two kinds of waveguide plane plating and microcrystalline, especially the general shape of the waveguide wire is a masonry product that can be used to lay floors and walls, the difference is obvious, the waveguide wire is mainly used to divide the functional area, but also to strengthen the role of visual hierarchy.

Second, the role of the waveguide. The role of waveguide wire in interior decoration enhances the role of ground decoration. Some lines that make the living room at home look particularly artistic, waveguide wires can make the living room floor more varied and beautiful.

The corrugated wire is like the kicking line on the wall to bring beauty to the home, and we all know that the kicking line can bring beauty to the wall, so the waveguide wire is to bring beauty to the ground. The corrugated lines are mainly to make the living room floor more varied and look particularly artistic.

Third, whether to install waveguide wires in the decoration living room. In fact, the focus is on the overall layout of the living room. If the space of the commercial house is not large, the installation of the waveguide wire feels more occupied space, it is not recommended to do the waveguide, the requirements of the waveguide wire are 800x800 tiles for the circle, and the living room is small It is recommended not to install it.

Especially in the sofa area and the TV cabinet area, if it takes up more space in these two places, it may cover the wave line, and it is also white. There is no point in installing it, and when installing the wave line, you must think about the overall effect of the furniture in the later stage.

If the living room space at home is particularly large, the living room with wave guide wire is more accessible. You can take a suitable position in the middle of the living room to make a simple geometric parquet for it, in fact, it is not difficult to spread a blanket under the coffee table, and change it at will after a long time.

It seems to be an inconspicuous waveguide, but when used well, the effect will be very unusual, and it can add a lot of beauty to the ground effect. So it is necessary to install.

Whether the living room decoration should be pasted with waveguide wires depends on the layout of the living room. If the sofa and TV cabinet occupy a lot of space, there is no need to put the wave line if you cover most of it, and there is no point.

Speaking of waveguides, they are often not valued in home decoration, and even many people think that their existence is dispensable. In fact, it is still necessary to use the seemingly inconspicuous waveguide wire, if used well, to add a lot of beauty to the ground effect.

I don't think it's necessary, but everyone has different ideas, so you can design it according to the overall style of your living room.

The main thing is to look at the area and layout of the living room, the area is small, and the layout is small, so you don't have to do waveguides.

There are two types of waveguide planes: gold plating and microcrystalline, especially the general shape of the waveguide is a masonry product that can be used to lay floors and walls, and the difference is obvious.

It still depends on the layout of your room, if you have too many things, the waveguide wires are covered, then it doesn't make much sense.

The installation of the waveguide wire plays a certain decorative role in the home decoration, and can also clearly divide the different areas of the same space, which can be said to play a great role in the decoration. For a house with a large decoration, the spacious and bright design often needs to add some layers of embellishment to highlight its style. Therefore, there are many people who choose to use waveguide cords to decorate when laying tiles in the living room.

So what details need to be paid attention to in the installation process of waveguide?

What is a waveguide.

Waveguide wire is also known as wave line, but some people also call it lace or edge line, etc., mainly used around the ground or in areas such as entrances. Waveguide is a kind of ceramic tile material, which plays a decorative role in home decoration, which can make the overall space effect appear more artistic.

1. It is decorative.

In home decoration, there are many places that may be the same as the ground, and there is basically no change, which makes people look at the overall feeling of monotony, boring and empty. Therefore, many people will use waveguide wires to decorate, so that the visual play a role in conflict, and it seems that the ground is more layered, more artistic, and more beautiful.

2. It has the function of separating areas.

In addition to lights and partitions in home decoration, waveguides can also play a role in separating areas. When decorating, many people will make waveguide wires between the dining room and the living room, or in the corridor entrance, which can play a role in dividing the area and enhancing the sense of space. <>

In order to achieve a better effect in the installation process, the waveguide wire needs to be cut cautiously and carefully, and there can be no unnecessary errors.

Because the installation of the waveguide wire is not feasible when the tile is installed, it is not feasible to pave it directly, and it is necessary to cut and splice the tiles with the shape of the waveguide, and then pave it.

In the process of paving, the tiles should be compacted and adjusted, and after the paving is completed, the grout should be sprinkled to facilitate leveling and spacing, and then make appropriate adjustments.

Details determine success or failure, no matter how good the effect decoration is without attention to detail, then the final effect is likely to be unsatisfactory, so don't let the neglect of details lead to the end result of the opposite.

In the current decoration process, many people's living rooms will be paved with floor tiles, and at the same time as paving floor tiles, many people will use corrugated linesThe material of the corrugated line is the same as the material of the floor tile, usually the color is darker, and the main function is to play the role of segmentation and increase the effect of visual layering.

The width of the waveguide wire is generally 150 mm and 100 mm, in many places we can see the shadow of the waveguide, such as hotels, shopping malls, office areas, etc., then many owners have questions, my home decoration, is it suitable to use the waveguide wire? In fact, the answer to this question cannot be generalized, and it still needs to be analyzed on a case-by-case basis.

1. Look at the decoration styleIf you are doing European style, European style will be more fancy than the simple style, according to the actual situation of the appropriate use of waveguide, which will increase the grade of the ground, but if you do the simple style, or the decoration color of the home is a unified color, then it is recommended not to use the waveguide, direct tile overall paving, so that it is more neat and spacious.

2. Look at the size of the spaceIf your living room is small, it is recommended not to use the corrugated line, which will make the ground more cluttered, and the space will be more crowded.

3. Look at the furniture matchingWhen we install the corrugated line, we often do modeling along the corner of the wall, so there is a problem to consider, such as being blocked by furniture, maybe the furniture has not moved in, it is very beautiful to do some modeling, but once the sofa TV cabinet is moved in, you will find that the modeling is blocked, that is actually a waste of money, and exposing a little bit of the corrugated line feels nondescript and affects the appearance.

However, some houses may need to use corrugated lines to adjust the floor tiles when laying floor tiles to achieve a better paving effect.

Is it necessary to install a waveguide? In fact, it still depends on the overall layout of the living room, if the space in the living room is not large, and the waveguide is installed, it feels like it will take up more space, so it is still subject to the area of the living room.

There is no need to install waveguide wires in the living room, because you only need to place a simple TV and other sofa air conditioners in the living room, and there is no need to put waveguide cables.

In fact, the living room does not have to install a waveguide, if the TV signal in the living room is not good, you can install the signal, if it is particularly good, you don't need to install it.

If the room is wide enough to install the waveguide is very three-dimensional and hierarchical, if the place is small or not to do the waveguide is better, so wide.

Wave wire, also known as wave guide wire, also known as lace or edge line, etc., is mainly used around the ground or in the aisle entrance and other places. Generally, it is a decorative line made around the wall side of the block building (ground); Widths vary. Floors are built with lines that are different from the overall floor color to add to the design effect.

It is mainly processed with some ceramic tiles that have some distinctions from the main color of the floor tiles, and is generally processed mainly with dark tiles.

In the garden, the edge of the stone is generally closed, which is called the corrugated line.

In the process of interior decoration, the corrugated line mainly plays the role of further decorating the ground, making the living room floor more varied, and looks like some lines with special artistic charm, which is full of beauty.

The corrugated line is the equivalent of a baseboard on the wall, except that the wall is lowered to the ground. The corrugated lines are mainly to make the living room floor more varied and look artistic.

The waveguide wire has a wide range of applications, such as living room, dining room, corridor, wall, and floor, and the cost is relatively economical, which is mainly reflected in the three major benefits.

One is aesthetics, the purpose of decoration in addition to practicality is ornamental, plus the wave guide line of the room can be easily doubled in appearance, is the decoration effect will not present a monotonous and boring feeling.

The second is the division of the area that is often talked about, and now most of the house structures are connected to the living room, and the increase of the waveguide line can make it obvious that these are two different spaces, and can also add a sense of visual hierarchy to the original decoration.

The third is the cost demand, the increase of the waveguide line can adjust the specifications of floor tiles and wall tiles to a certain extent, to avoid excessive waste caused by tiles in the paving process, so that the cost is naturally slowed down to a certain extent, and the difficulty of construction is also reduced.

Note: The waveguide wire is not suitable for all home decoration, in fact, it is necessary to analyze it according to the specific situation, otherwise it may be a snake in the decoration effect.

Nowadays, many people will lay tiles on the ground when they decorate the house, but we can find that many owners will also design waveguide wires on the tile floor, is it necessary to do waveguide wires? Next, let pchouse answer for you.

1. Look at the size of the area.

As for whether to install the waveguide, this depends on the size of the paving position, if the area is small, it is recommended that you do not need to install the waveguide, otherwise the furniture will be placed in the later stage, not only the pattern of the waveguide wire will be covered, but the whole space looks smaller.

2. Look at whether to use carpets.

If you have the habit of using carpets at home, then this must not be said, and the installation of wave guide wires will also be blocked, and it will not play a role.

3. Installing waveguide wire can save bricks.

Now buy tiles, many salespeople will say that if the home is installed with a waveguide can save the amount of porcelain mountain or messy bricks, in fact, this statement is wrong, experienced masonry masters know that the general tiles are pasted by a corner, only need to cut the bricks on both sides of the wall, but if the group is installed with waveguides, it is equivalent to dividing a compass in a small space and a more small space, so that more tiles need to be cut, not only fragmented bricks, but also a waste of time and money.