The floor was soaked in water for an hour, and there was a leak downstairs

If the floor is soaked in water for an hour, it may cause water leakage downstairs. This is because soaking in water on the floor causes the waterproofing layer under the floor to expand, which makes the waterproofing layer ineffective and the water can penetrate downstairs.

In this case, you need to take the following measures:

1.Immediately stop the water source and remove water from the floor.

2.Explore the cause of the leak and inspect all pipes in or downstairs for cracks or signs of water leakage.

3.If the cause of the leak is found, the damaged pipe parts should be repaired or replaced immediately.

4.If the leak is more severe, the water source needs to be eliminated as soon as possible and the accumulation of water can be reduced. This may require the use of a water suction or other device to reduce the amount of time it takes to hold water on the floor.

5.Do a good job of drying. Once the water has been removed from the floor as much as possible, it needs to be dried. An air conditioner or fan can be used to improve air flow and reduce humidity. The less water is left on the floor, the easier it will be to handle and dry.

6.If the use of the floor has been severely affected, you may need to re-lay the floor. After inspecting the entire flooded area, you can discuss with a professional how best to reconstruct the floor. It is important to consider not only aesthetics, but also moisture resistance.

In conclusion, soaking in water on the floor may cause water leakage downstairs. In this case, you need to take timely measures, including stopping the water source, checking the cause of the leak, eliminating the water source, doing a good job of drying, and rebuilding the damaged floor.

It means that there is a leakage on your ground, did you do a water storage test after doing the waterproofing at that time? After the waterproofing is completed, the water storage test must be done to see if there is any leakage. Another is that cement does not play a waterproof role.

In your case, it is recommended that you use the following methods for repairs:

1. The most likely leakage and the best maintenance part is the root part, which is the focus of waterproof leakage. You smashed all the pipe roots and re-waterproofed, it is recommended to buy a leak plugging devotional. After the pipe root is repaired, the surrounding water test is done at the pipe root site.

It is to use cement to surround the pipe root, store water for 24 hours, and go downstairs to see if the pipe root is leaking. It's OK if you don't leak.

2. After the pipe root is repaired, the whole ground is re-stored for 24 hours to see if there is still leakage downstairs, if it is not leaking, if it is leaking, you can only re-do waterproof all the ground. It is recommended that polyurethane and pipe roots should be treated emphatically. Do a good job of water storage test.

Another important point is that the waterproofing must be done as a whole, and the thickness must be the same. Don't do what you think is important, do more.

Legal analysis: If the property comes forward to coordinate, it can request timely maintenance and compensate for economic losses according to the maintenance costs. Make a damage assessment, clarify the responsibility, and the upstairs should bear the losses caused by flooding downstairs, and then do the later legal work.

If there is evidence that the water leak was caused by the fault of the upstairs, then direct financial compensation can be claimed according to the actual loss.

Legal basis: Article 1182 of the Civil Code of the People's Republic of China: Where property losses are caused by infringement of the personal rights and interests of others, compensation shall be made in accordance with the losses suffered by the infringed party or the benefits obtained by the infringer; Where it is difficult to determine the losses suffered by the infringed party and the benefits obtained by the infringer as a result, and the infringed party and the infringer disagree on the amount of compensation and file a lawsuit with the people's court, the people's court shall determine the amount of compensation based on the actual circumstances.

The leaky floor at home is blistered, and the solution:

1. Soak in a small amount.

Whether it is solid wood flooring or laminate flooring, it is generally sufficient to clean the surface of the floor with water. The method is simple, vacuum the water dry, or use a hair dryer to blow it down, but do not use hot air because it will deform the floor.

2. Local soaking.

For example, if the window is not closed on a rainy day, the floor is blistered, this situation is usually not very serious, it is recommended to clean the water on the surface of the ground first, remove the baseboard and the door pressure strip, and use the method of opening the window to ventilate the water on the surface of the floor, if not, then you can only use a vacuum cleaner to absorb the water. Usually a good solid wood floor can be automatically restored even if it is deformed.

However, laminate flooring is not easy to say, it is very likely that it will not be restored if it is deformed, so it can only be replaced with a new floor.

3. Large-area soaking.

If the floor has been blistered in a large area, usually the floor will be scrapped soon, whether it is a good floor or a bad floor, whether it is a solid wood floor or a laminate floor, especially if it is soaked for a long time, even if the water is absorbed, the surface of the floor looks out of water, but after a period of time the floor will be deformed, there is no good way to deal with this situation, and the floor can only be replaced.

Precautions for floor maintenance at home.

1. Keep dry.

We have been accustomed to mopping the floor with a mop, it is better in summer, and it is easy to cause erosion of the floor when the water is not easy to evaporate in winter, usually you can use a vacuum cleaner or broom to sweep the surface dust, and then wipe the surface of the floor with a rag or mop that is wrung out after wetting until it does not drip. Open doors and windows after mopping to allow air to circulate and dry the floor as soon as possible.

2. Do not clean alkaline water.

When cleaning the floor, it is necessary to pay attention not to wet the mop with water or scrub with alkaline water and soapy water, so as not to destroy the brightness of the paint and damage the paint film.

3. Wax regularly.

The surface of the wooden floor looks better when it is smooth and clean, so it needs to be waxed every once in a while, and the general waxing is recommended to accompany you, depending on the finish of the floor, the method is to wipe the floor with a semi-dry rag and wax, the floor wax should be evenly applied to the surface of the floor, and then wipe it back and forth on the floor with a dry soft cloth after a little drying, until it is smooth and translucent.

When the wooden floor is blistered, many people don't know how to do it. What to do with household foam waters? Recommend some good ways for you to soak the bottom of the water will restore the laminate floor, without solid wood flooring, if partially immersed, it should occupy the floor floor in the shortest possible time.

In the case of small measuring water, it is recommended not to dry the floor, so it is easy to cause refractory material to the laminate floor, which can lead to serious consequences that cannot be recovered.

It is best to quickly come off the floor of the floor, exposing expansion joints, which, depending on the amount of water in the water, emit water vapor, which usually takes about a few days. It is also possible to use a vacuum cleaner in the splice gap under the immersion water, or to dry it with a hair dryer, but not with hot air, preventing the surface from deforming due to thermal drying. If it's a large area, you'll have to contact flooring customer service.

When laminate flooring is in progress, the water is first treated clean, the water under the floor is not allowed to take it, and the most important thing is to keep it ventilated to dry it naturally, not to blow dry the electric hair.

If removed, the floor is deformed, in order to make the floor drive as soon as possible, you can remove the kicking cord so that the moisture evaporates as soon as possible. If you find a place where you can press the weight to press the weight etc and then take it down, you have to be patient. If the solid wood floor is largely foam, the wood flooring service should be notified in time, carefully pick up the wood floor, and remove the water from the surface of the floor as soon as possible, then press the stack, and use the stacking weight to prevent deformation when placing carefully.

The floor is facing up, preventing the surface from drying quickly and while paying attention to the sun, it should be placed in a ventilated place, and it will recover from one to two weeks. Decide if you can use it again. If the floor is extensive foam, then for a short time.

In addition to the above methods, you can also consider pumping out your air conditioner. Carefully close doors and windows, close the space, and turn on the air conditioner to the lowest temperature. In general, the method is usually thorough and thorough.

This method of dealing with it is easy to learn.

Generally speaking, as long as the wooden floor is treated in time after soaking in water, there is no problem, and it can still be used.

Answer: Compared with ceramic tiles, wood flooring, as a commonly used laying material for the ground, is most afraid of soaking in water. If it is only partially soaked in water, it can be air-dried with a vacuum cleaner or hair dryer; If the soaking area is too large, it needs to be treated separately for the boards of different materials, and the solid wood floor needs to be stacked in the shape of a well. Laminate flooring cannot be pried open, and can only be patiently allowed to dry naturally after simple treatment. 1. Local soaking 1. First of all, the furniture and items placed on the soaked floor should be removed, and then the surface water on the wooden floor should be blotted dry with a dry towel or mop in the shortest possible time.

2. The moisture in the joints of the floor needs to be treated with a vacuum cleaner and a hair dryer. Vacuum most of the moisture first, then blow with a hair dryer on the wooden floor splicing seams until dry. Here, it is important not to use hot air to prevent the surface from drying out due to heat and drying.

3. Turn on the air conditioner and turn on the dehumidification mode to keep the indoor air dry. If the immersion time is relatively short, as long as the doors and windows are closed, and the air conditioner is turned on to the lowest, it can be restored in one day. 2. Large-scale soaking If the wood floor is soaked in water in a large area due to pipe rupture and other reasons, it needs to be treated differently according to the different materials of the floor.

The specific methods are as follows: 1. Solid wood flooring Solid wood flooring is the most squeamish among many floors, because it is actually natural wood, so it is easy to deform and mold after soaking in water. After a large area of solid wood flooring soaked in water, you can only choose to dry it after all of it is cocked.

Method: Remove the baseboard first and carefully pry the floor up; Then wipe it off with an absorbent cloth and place it on top of each other in the shape of a "well", using the weight generated by the stacking to prevent the floor from deforming. When placing the floor, pay attention to the reverse side of the floor facing up, remember to raise the air below, and then put the floor in a ventilated place to dry.

Remember not to expose yourself directly to the sun. Generally speaking, the best solid wood flooring can be paved again after drying.

Question: The house was closed and suppressed, and it was found that the water pipes were broken, the walls of the house were peeled, and the wooden floors were also peeled, and the wooden floors needed to be replaced.

Question: How to communicate with the logistics to let him replace all of them, I haven't received the house, how to communicate with the property to let him replace all of them, I haven't received the house yet, if the delivery is delayed, how should I protect my rights and interests.

I can use it, but it's definitely not good. He's going to be warped. Therefore, after being blistered, you can press it with a heavy object.

After the wooden floor is blistered, it cannot be used continuously, which will cause wood corrosion, so the function will also be reduced, and there will be a lot of small insects on it.

It can be used, the wooden floor is not afraid of blisters at all, and if the quality of the wooden floor you choose is particularly good, you can continue to use it.

The upstairs floor was soaked in water for several hours, and the water seeped into the downstairs in serious condition. This behavior will cause water to seep into the ceiling of the house downstairs and cause losses to the residents downstairs. According to Article 1182 of the Civil Code of the People's Republic of China, where property losses are caused by infringement of the personal rights and interests of others, compensation shall be made in accordance with the losses suffered by the infringed party or the fierce benefits obtained by the infringer.

Where it is difficult to determine the losses suffered by the infringed party and the benefits obtained by the infringer as a result, and the infringed party and the infringer disagree on the amount of compensation and file a lawsuit with the people's court, the people's court shall determine the compensation based on the actual situation.

Of course, it is to find out what the homeowner claims. Find the property first, and the property will come forward to solve the problem, if it doesn't work, you can find the court to sue.

What to do if the house leaks to the downstairs floor, in the process of people's home decoration, the waterproof layer treatment of the ground is very important, if you accidentally touch the water leakage, it is a very troublesome thing, let's understand what to do if the house leaks to the downstairs floor.

The owner of the upstairs shall be responsible for repairs until there is no leakage, and shall compensate the property damage and lost time costs downstairs, the specific amount of compensation shall be determined by the parties through negotiation. If the negotiation fails, the judicial procedure may be followed, and the court judgment shall prevail.

What are the precautions for ground waterproofing?

1. Demolition of walls and floors

The bathroom is the place with the largest water consumption in the home, so the removal of the wall and the floor is very important, which will directly affect whether the waterproofing of the bathroom can be done at one time.

Demolition requirements: When the wall is removed, it must be removed to the ground floor, and the ground must be removed to the floor layer. The connection between the wall, the ground, and the wall and the ground can not be left with the acute angle of concrete, the steel head, and there can be no unevenness.

2. Make a protective layer

When making the waterproof layer, the upper and lower protective layers should be done, which is to be able to protect the waterproof layer.

3. The importance of closed water test

After the protective layer on the waterproof coating is dry, the closed water test must be carried out in accordance with the relevant regulations, and it must not be sloppy.

4. Brush waterproof paint

The use of waterproof paint tools must use a brush, can not use a roller, in the construction, must be a brush next to a brush, there must be no omission, and should wait until the last waterproof cool dry and then brush the next time, in the brush, should be brushed vertically and horizontally alternately, to ensure that every corner is brushed in place.

5. The waterproof coating used must be a qualified product that meets the national requirements.

1. Understand the water leakage.

When there is a leak upstairs, we will take the initiative to communicate with the residents upstairs, and the owners of the downstairs can ask the quality inspection department of the house to find out the cause of the leak and how to repair it. If the house is still under warranty (5 years for waterproofing and 2 years for water pipes), the developer can be held responsible.

2. Upstairs treatment method.

After the responsible party has been identified, the owner of the downstairs may, according to his own circumstances, make a request for repairs upstairs and compensate for the damage caused to him during the repairs, which must be a reasonable amount agreed upon by both parties. We will resolve the matter satisfactorily through friendly consultations.

3. The determination of responsibility shall be submitted to the court for handling.

If there is a dispute, the proposal is submitted to the court to protect their rights and interests, if the upstairs ignores the court's decision, the downstairs owner can ask the construction team to repair it, pay the cost in accordance with the relevant laws and regulations, and then claim compensation from the upstairs neighbors through the court.