Why does the back of the newly bought tile look dirty?

So, for the tile dirty, how do we clean it? Here are a few tips for you, so that you can easily clean your home, friends come to your house, and think you have changed the new tiles.

First of all, let's talk about the most difficult tile to clean in the home, that is, the kitchen tile.

The cleaning of kitchen tiles must have stumped many housewives, in fact, there is a very simple way to clean it, that is, to use soapy water.

First prepare a bowl of warm water, then put the soap head or soap foam in it, and when it is dissolved, pour in a spoonful of flour, stir well until the water becomes a little viscous, then use a brush to dip this homemade detergent to wipe the tiles full of grease, many of which can be wiped clean, better than using dish soap.

Then there are the gaps in the tiles. Do not use a brush to brush the gaps in the tiles, otherwise it is easy to damage the wall soil and cause a deep gap in the tile joint. We can apply a little baking soda powder to the gaps, and then prepare a bowl of white vinegar water, put it in a watering can and spray it on the gaps, be sure to spray it all, and then wait for a minute or two, and wait for a minute or two after the foam after the reaction between baking soda and white vinegar water, and then wipe it with a rag, and soon the dirt will be gone.

Let's talk about bathroom tiles, bathroom tiles are undoubtedly highlights: moldy and yellow. We can use the Multi-Purpose Cleaning Paste to help.

This decontamination paste has the advantages of non-toxic, environmental protection, no peculiar smell, strong detergency, sterilization and disinfection, etc., if the tiles at home are yellow, you can use a toothbrush dipped in multi-functional cleaning paste to wipe, and at the same time, if you want to clean more quickly, you can add some white vinegar to help, and then brush it with caulk after decontamination, which can not only prevent water seepage but also prevent mold growth.

If the tiles on the side of the kitchen stove are not wiped for a long time, there will be a lot of grease on it, which is particularly difficult to clean, so in order to facilitate everyone to better clean the kitchen tiles in the future, you can try this kind of grease baffle, install it on the stove, and clean the baffle directly next time.

If you think the baffle is not very easy to use, then stick a piece of this oil-proof sticker on the wall, high temperature resistance, non-toxic and environmentally friendly design, it is very safe to use, and it can be pasted on the wall, it can play a good role in oil and dirt separation.

Whether it is a kitchen tile or a bathroom tile, after cleaning the tile joint, we must use this beauty joint to fill it in time to avoid mold in the tile gap. This beauty sewing agent is made of a non-toxic and environmentally friendly formula, which is not only convenient for construction, but also more anti-fouling and wear-resistant, and can achieve the effect of being as hard as porcelain after molding, which is very beautiful.

Newly bought tiles shouldn't be dirty!

You have to ask the seller, what the hell is going on?

I'm afraid of encountering something ...... catty

Nowadays, porcelain bricks are also widely used in people's lives, but in daily use, people will find that porcelain bricks seem to be easy to get dirty, why is this? Next, let's introduce it to you.

Porcelain throwing bricks basically belong to the whole body bricks, and the green body belongs to the porcelain body, and the density is quite high. It stands to reason that porcelain tiles are not easy to get dirty, but because of the different quality of the tiles, there may be many fine holes on the surface of the tiles. These pores are stained and infiltrate the dirty water of the spring car, causing the porcelain bricks to become dirty.

In addition, it is also determined that it is generally difficult to use tiles in places where there is often water and large oil stains.

There is also the low hardness of the porcelain brick and the glaze is very weak, resulting in the porcelain brick is easy to be scratched and damaged, the tile is scratched and damaged, resulting in the decline of its aesthetics, and it is also easier to hide dirt and dirt, and it is difficult to clean.

Kiss, <>

We're glad to answer your questions! Tiles look dirty and can't wipe off the stains on the floor tiles can be cleaned with dish soap, limescale can be tried with white vinegar, white vinegar has the effect of sterilization and disinfection. It is not recommended to use sandpaper, steel wool balls, etc. to wipe the potato, because if the surface of the tile becomes rough, it will be easier to scale and expand the information There are several situations:

One is that the quality of the tiles is poor, and the surface enamel is damaged. Second, there may be some special stains that are not easy to clean. The third can be that the cleaning method is wrong.

If the oil stain is too heavy, you can try it with green detergent, and the effect should be good. 1. If the surface of the tile is dirty, but it can't be wiped off, the important thing is that we didn't choose the right tools, including scrubbing tools, and some cleaning agents. Prepare a watering can, add white vinegar, baking soda and an appropriate amount of toothpaste, add clean water, stir well, and spray directly on the dirty tile surface.

2. Use a brush to scrub and easily scrub the surface stains clean. The baking soda is an alkaline substance, which can remove oil, especially stubborn stains, as long as it is mixed with water. The white vinegar has the effect of softening the dirt and can also play a sterilizing effect, so the combination of these kinds can wipe the dirty tiles clean.

3. If you are afraid of trouble and don't want to make your own, go directly to the supermarket to buy a tile cleaner. It is a detergent specially for tile cleaning, as long as you spray it, and then wipe it with a rag, you can answer that the person can see the effect immediately. Hope mine can help you!

1. For glazed bricks, the glaze layer of the brick surface is a very dense substance, colored liquid or dirty things will not penetrate into the brick body, the pollutants of the brick surface can be removed by wiping the brick surface with a rag or adding some washing spirit, if it is a tile with a strong sense of concave and convex, the uneven gap squeezes a lot of dust, use a brush brush, and then rinse with clean water to remove the dirt on the brick surface.

2. Dirt cleaning method of vitrified bricks:

For vitrified tiles, the following corresponding cleaning agents can be used to clean up the contaminants commonly used in the household:

1) Pollution type: daily cleaning.

Cleaning method: You can use a cloth, and then use dish soap and soapy water to clean it.

2) Pollution type: tea, ice cream, grease, beer.

Cleaning method: You can use soda ash solution to clean it.

3) Pollution type: sediment, rust, mortar.

Cleaning method: Use sulfuric acid or hydrochloric acid solution. Drop it on the brick surface, let it stand for a few minutes and then wipe it, taking care to protect your hands.

Amway has a special tile cleaner that works quite well! If lime, putty powder, and white latex drip off the brick surface, use a blade to carefully scrape off.

4) Pollution type: paint, drawing pen.

Cleaning method: You can use turpentine, acetone to wipe, and the toothpaste used at home also has a good stain removal effect.

5) Pollution type: soy sauce, vinegar, carbon powder.

Cleaning method: The effect of using toilet cleaner is better.

6) Contamination Type: Ink.

Cleaning method: You can use Amway tile cleaner or toothpaste.

7) Pollution type: sediment, rust, mortar.

Cleaning method: Use sulfuric acid or hydrochloric acid solution. Drop it on the brick surface, let it stand for a few minutes and then wipe it, taking care to protect your hands.

Amway has a special tile cleaner that works quite well! If it is lime or dripping brick surface, use a blade to carefully scrape off.

Is there a stain on the surface of the floor tiles? Then use 84, if not, wipe the steel wool lightly.

The quality is not good, and the bricks with poor stain resistance are like this.