What color tiles are easier to spot stains? 50

There are three common tile colors: gray, white, and light yellow.

1. The gray color is low-key and natural, because the light gray of low brightness is relatively similar to the color of the dust itself, so the gray floor tiles.

Relatively resistant to dirt. However, dirt resistance is different from gray resistance, light gray is gray resistant, and dark colors are more dirt resistant. For families who clean their floors several times a week, choosing dark tiles is more resistant to dirt, because the interior is basically dust-based, especially if you choose a shiny and dark tile with dust, but dark tiles are not easy to match with furniture.

2. White.

White tiles will give people a very fashionable and neat texture, but it should be noted that if you lay white tiles in the living room, the footprints will be particularly obvious, and the hair will fall out is also particularly obvious.

3. Light yellow color.

The light yellow floor is more resistant to dirt, and footprints and dust are not easy to see. If you choose decorative wood tiles or tiles with other patterns, it is easier to hide small stains. Light-colored, wood-colored, matte-finished flooring is more resistant to dirt and looks more ordinary, but it is easy to match with various styles.

However, you can choose tiles with patterns to create a unique style.

1. Light gray.

Gray is close to white, which can give people a clean and neat feeling. In addition, gray is not as monotonous as white, and it has an extra layer of luxury, which also has an advantage in terms of decoration. Gray is also relatively resistant to dirt, so it is suitable for use in the kitchen and bathroom.

2. Black and white checkered.

Black and white lattice tiles, can create a Nordic style atmosphere, simple, but very exquisite, the choice of this black and white small lattice tiles, the sense of literature and art is super strong.

3. Retro color.

If you want your home to present a different style, you can choose retro-colored tiles and solid wood cabinets, and the quality of the home will come out, a proper American retro style.

4. Warm yellow.

Many people decorate a new house and pay attention to the warm atmosphere, so warm yellow tiles are a good choice.

Why are floor tiles easy to get dirty?

Floor tiles are easy to get dirty, mainly caused by the following reasons:

First, the home is prone to pollution sources, so that the freshly cleaned tiles soon show traces of dirt.

Second, the tile is used for too long, so that there are slight marks on the surface of the tile, which is easy to hide dirt and dirt.

Third, the tile itself is not resistant to dirt, the color is too light, and the slightest water stain will be obvious.

Of course, this is that light-colored tiles are easier to find stains, and dark-colored tiles are not easy to find stains, that is to say, light-colored tiles are not resistant to dirt, and dark-colored tiles are more resistant to dirt.

The lighter the color of the floor tiles, the easier it is to spot the stains on the floor tiles. Faultless. The slightest flaw will be visible. Hope.

It must be a white tile, once there is a stain, it is very noticeable.

It's some lighter colors, such as white, milky white, or something.

White Light-colored tiles are difficult to wipe clean once they are stained.

Cleanup Tips:

1. Daily cleaning of ceramic tiles can be carried out with dish soap, soap, etc.

2. Clean the tiles with a mixture of soap and a little ammonia and turpentine, which can make the tiles more shiny.

3. The polished tile should be waxed regularly, and the time interval should be 2-3 months.

4. If there are scratches on the brick surface, you can apply toothpaste to the scratches and wipe them with a dry cloth to repair them.

5. The crevices of brick B can be removed from time to time with detergent, and then a layer of waterproof agent can be brushed on the gaps to prevent the growth of mold.

6. Sodium hydroxide or potassium bicarbonate solution can be used to remove pollutants such as tea, coffee, beer, ice cream, grease and so on.

7. Hydrochloric acid, nitric acid and other diluted solutions can be used to remove ink, cement and other pollutants.

8. Special cleaners can be used to remove paints, coatings and other pollutants.

9. To remove rust, it can be washed with 2% oxalic acid solution, and then wiped with water. If it is rust stains, you can use 10% oxalic acid, citric acid and water mixture to soak the rust area, and then wipe it with concentrated salt water.

Living room tile construction strategy.

1. Determine the style and consider the individual needs.

When purchasing floor tiles, we must first consider our overall style, determine the approximate color tone of the tiles, so as to coordinate with the overall style of the living room, and pay attention to consider some of their own individual needs.

2. How to determine the specifications of floor tiles.

When considering the specifications of floor tiles, we should pay attention to the following two aspects: one is the size of the living room, do not blindly pursue large-size floor tiles.

A1One is the use of toothpaste; First, squeeze some toothpaste on the stained area of the floor tile, then scrub it with an unused toothbrush or other brush, and then wipe it with a dry rag. 2.

the second is to use white vinegar and laundry detergent; First pour an appropriate amount of white vinegar into the water, then pour in a little laundry detergent, and stir well, then sprinkle the stirred water on the tiles, sprinkle more where there are stains, and finally use a mop to drag back and forth on the floor a few times.

I've used dish soap before and it's useless.

There is also a question about water responsibility.

Then you buy a white cat, bleach, and a brush mixed with water.

Wash the stubborn stains of the tiles as follows:

1. When the tile is cleaned, you can use the soapy water commonly used at home to wipe it simply.

2. If you want the tile to have a brighter and cleaner effect, you can add a little ammonia and turpentine to the soapy water, with the addition of these two liquids, it will make the wiped tile brighter.

3. Drink some coffee at home and eat some ice cream, which is always easy to fall on the surface of the tile and leave stains, which can be better if treated in time, but some stains are more stubborn and difficult to wipe clean, which can be cleaned with sodium hydroxide. If your child drops ink on the tile, you can wipe it off with a solution diluted with hydrochloric acid or nitric acid.

4. If there are scratches on the surface of the tile, you can first apply toothpaste and then wipe it clean with a soft cloth. Rotten Nassin.

5. If you want the tile to be bright, you have to do waxing treatment regularly, generally about 2 months to wax on the line, and the gaps between the bricks should be decontaminated and cleaned from time to time, which can keep them bright and prevent the growth of mold.

One: Use toilet paper to "apply" the tiles

Stick toilet paper or paper towels on the tiles, spray detergent on them and leave them for a while, just like a feminine compress, not only will the detergent not drip everywhere, but the grease will all stick up. Just tear off the toilet paper and wipe it with a clean rag dipped in water 1 or 2 times, and the tiles will look brand new. For tile tiles with heavy oil stains, you can stick toilet paper or paper towels on the tiles overnight, or replace toilet paper with cotton cloth, and wait for the oil stains to be fully absorbed by the paper towel, and then wipe them with a damp rag.

This method can also be used for ventilation fans on the inside of the range hood.

Two: Clean the tiles with a toothbrush

In fact, insisting on simple oil control cleaning every day can reduce the workload and reduce the difficulty of the work. Because, in this way, the oil stain area is relatively small, and the degree is shallow, which is easier to clean. In the daily small area of oil stains, you can skillfully use an old toothbrush to clean up, which is not only clean, but also labor-saving.

In addition, if you are in a difficult place to clean, such as tile joints, you can also use an old toothbrush, because the toothbrush has relatively small teeth, so you can go deep into the crevices for deep cleaning.

Three: Shovel steel wool ball cleaning

If the oil stain on the tile or the gap is really thick, first use a shovel to shovel it, or use a steel wool ball to clean it first, and after thinning, you can use acidic or dissolved detergents to clean.

Four: Candle to clean the joints of the tiles

Gently apply the candle to the joints of the tiles, first vertically, so that the candles can be evenly applied to the joints; Then apply it horizontally, so that the thickness of the tile is equal to the thickness of the candle. The purpose of applying candles is because the surface of the candle is smooth, and even if it is stained with oil, it will be clean with a light wipe of the candle.

To clean up the dirt on ceramic tiles, it is necessary to understand the types of tiles and the nature of contaminants.

1. Pollution cleaning method of glazed bricks:

For glazed bricks, the glaze layer of the brick surface is a very dense substance, colored liquid or dirty things will not penetrate into the brick body, the pollutants of the brick surface can be removed by using a rag dipped in water or adding some washing spirit to wipe the brick surface, if it is a tile with a strong sense of concave and convex, if there is a lot of dust squeezed in the uneven gaps, use a brush brush, and then rinse with clean water to remove the dirt on the brick surface.

2. Dirt cleaning method of vitrified bricks:

For vitrified tiles, the following corresponding cleaning agents can be used to clean up the contaminants commonly used in the household:

1) Pollution type: daily cleaning.

Cleaning method: You can use a cloth, and then use dish soap and soapy water to clean it.

2) Pollution type: tea, ice cream, grease, beer.

Cleaning method: You can use soda ash solution to clean it.

3) Pollution type: sediment, rust, mortar.

Cleaning method: Use sulfuric acid or hydrochloric acid solution. Drop it on the brick surface, let it stand for a few minutes and then wipe it, taking care to protect your hands.

Amway has a special tile cleaner that works quite well! If lime, putty powder, and white latex drip off the brick surface, use a blade to carefully scrape off.

4) Pollution type: paint, drawing pen.

Cleaning method: You can use turpentine, acetone to wipe, and the toothpaste used at home also has a good stain removal effect.

5) Pollution type: soy sauce, vinegar, carbon powder.

Cleaning method: The effect of using toilet cleaner is better.

6) Contamination Type: Ink.

Cleaning method: You can use Amway tile cleaner or toothpaste.

Suggestion: If the surface of the vitrified tile is contaminated, it is recommended to use the corresponding cleaning agent to clean it immediately! `

Note: Commonly used cleaners in the home:

Toilet Cleaner, Toilet Cleaner, Toothpaste, Amway Tori Tile Cleaner, Qianyixi Ceramic Brush and Qianyixi Ceramic Stain Remover (good stain removal effect for stubborn stains).

How do you remove stains from tiles?

Scrap old bank cards and the like, wipe with cola or sodium acid.

My home is covered with Faenza tiles, which are very clean, there are no stains, I am really happy, haha, so I don't know how to clean them.

Supermarket buy powerful detergent, safe, environmentally friendly, convenient, fast!

The stains on the tiles generally include ash scale, cement scale, rust scale, tea stains, drink stains, rubber hammer marks, leather shoe scratches, stubborn wax stains, aluminum marks, etc.

Removal method: 1. Tea scale, rust, and traces of rubber marks should be cleaned with acidic detergent or diluted hydrochloric acid solution (1:1).

2. Paint grease and other stains should be cleaned with banana water.

3. Yellow cardboard stains or other colored stains should be cleaned with bleach.

4. Blue ink watermark with sodium hypoglycine solution or alcohol, dish soap 5, mark handwriting, purple potion with trichlorohexane or acetone.

6. Alkaline solution for wax.

7. Cement or mortar with dilute hydrochloric acid and other acidic solutions.

8. Metal, pencil scratched marks with sodium hypochlorite solution or detergent 9, rust with white cement + wet rag, hard to check for one minute.

Buy a little alkaline noodles (baking soda), dip it in water and rub it, and it's OK.

Ceramic tiles need to be used in decoration, because the tiles are beautiful, generous, wear-resistant, have a long service life, and will not appear to expand and deform for long-term use. So, let's introduce how to remove the stains on the tiles after decoration and how to distinguish the quality of the tiles.

How to remove stains on tiles after decoration.

1. Floor tile cleaner.

Some tiles have not been laid for a long time, and there are stains, for this kind of problem, you can use floor tile cleaner to remove the stains, the effect is very good, and this floor tile cleaner is one of the most commonly used methods by people.

2. Wipe with a dry cloth.

For general stains, you only need to wipe it with a dry cloth, and it will get brighter and brighter, and for ink, coffee and other stains, you can use laundry detergent and dish soap to clean, and then wipe with a dry cloth, and the effect is also very good.

3. Mop wipe.

If you wipe with a mop, first make sure that the mop has wiped the sanded floor, because the stain will be difficult to remove once it is stained with wax, otherwise it will be treated with a professional cleaner. Therefore, this tile cleaning method should also be paid attention to.

4. Detergent.

You can use a professional stain remover to remove stains, this stain remover has a good effect on scale, black scale, and rust, so you might as well try it.

How to distinguish the quality of tiles.

1. Look. Look at whether there are black spots, bubbles, cracks, stains, missing corners and other problems on the surface of the tile, look at the water absorption rate of the tile, just drop water on the back of the tile, if the diffusion area is small, the drying time is fast, the lower the water absorption, the better the quality.

2. Shake. You can use your hands to remove the tile, the same specification of the product, ***, high density of ceramic tiles feel heavier.

3. Listen. The quality of the tile can be identified by the sound, and the quality of the tile with a crisp sound is generally better.

4. Open. Unpack and check whether the tiles are damaged, whether the tiles are colored after tiling, and whether the size is consistent.