What should I do if water accumulates in the bathroom shower?

How to deal with stagnant water in the bathroom:

1. Before decoration, carefully check whether there is leakage in the kitchen and bathroom on the upper floor, if there is, you should first do the waterproof project upstairs before decoration. If there are no occupants on the upper floor for the time being or for other reasons, the waterproofing works on the upper floor cannot be treated for a while, measures should be taken to remedy the situation: apply polyurethane to the bottom of the leaking part, but the plastering layer of the leaking part should be disposed of and the base layer should be dried.

2. If the waterproof layer is not made before, the waterproof layer will be added according to the above method; If the original waterproof layer has been made, it should be carefully checked to see whether the waterproof layer is in place and whether it is damaged, otherwise it should be repaired. After the repair is completed, the water injection test should be carried out to ensure that there is no leakage and no moisture in the downstairs and surrounding walls.

3. If the distance is too far away, the modification will affect a lot of floor tiles, so it is better to re-pave. If the height difference between the distance is less than 2 centimeters, you only need to re-pave the floor tiles near the floor drain. During specific construction, it is necessary to know the direction of the in-situ buried pipeline and the depth from the ground, otherwise it is possible to damage the buried pipeline.

em11] The bathroom is full of water, and I am the water in the bathroom that flows to the door, and I don't know until I decorate. It's better if the developer doesn't do it, and there will be no problem if you do it yourself! It's really greedy for small gains, and suffer big losses!

Hehe! It's a sassy idea.,The bathroom is pretty small.,Plus a bathtub.,Can't open the belly.。。。 em14]

This is also the problem in my house, and every time I take a shower, I take the washing machine away and wipe it down. Later, I bought a large basin to receive water, which was more convenient, but it also needed to be cleaned up every once in a while.

You either knock the floor tiles and redo it, or you don't have to go through the hassle to unplug the drain from the washing machine before taking a shower and let the bath water flow from this side, but even if you do, you don't necessarily want the water to go to the other outlet You can put two floor drains together, one can be connected to the washing machine, and the other can drain the water in the bathroom.

Solutions for leakage in the shower room: replace the water pipe, seal the glass glue, repair the waterproofing, etc.

1. Replace the water pipe

The shower room leakage may be caused by the damage of the water pipe, most of the water pipes in the shower room are on the ceiling, so there are water pipes on the wall and ceiling, if the water pipe buried in the wall is leaking, it is more troublesome to repair, you need to remove the tiles and replace the pipe in the wall, if it is a ceiling leakage, it is relatively simple, check which water pipe is specific, and then replace the new water pipe.

2. Seal with glass glue

The leakage of the shower room may also be a problem with the sealing, such as the glass glue in the gap between the shower room and the wall during installation, or the inferior glass glue used, etc., in this case, the glass glue needs to be re-beaten and sealed.

3. Repair waterproofing

If it is determined that it is a waterproof problem, it is necessary to specifically check whether it is caused by the waterproof damage of the wall or the ground, and then repair the waterproofing.

How to repair waterproofing

1. Clean up the base layer, the surface of the original wall and ground should be solid, and there should be no sand, ash or hollowing.

2. Clean the root of the upper and lower water pipes and plug the leakage, and paste the contour line with 10-15 wide masking paper according to the height of the wall design and construction.

3. The first emulsion is brushed in the order from top to bottom, from the inside to the outside, and the second emulsion is brushed after drying for 24 hours, so that the two emulsions form a complete waterproof layer.

If it is a floor drain sewer pipe, knock out the floor tiles at the floor drain, knock out the sewer pipe 3-5 cm, seal it with the plugging king around it, and then paint the exposed parts with flexible waterproofing, and then pave the floor tiles. If it is around the top or edge, use Qinglong elastic sealant to seal the joint between the tiles around the bathroom or the edge, and the range can be appropriately expanded.

The first thing is to find the water seepage point of the wall and the cracks of the external wall, and sweep away the external wall plastering layer, wall cracking plastering layer and large-scale cracks of the external wall at the interface between the gas and the structural beam along the cracks. Then find out the money should be hand-held cutting machine to cut the plastering layer to prevent the plastering layer from being generated by vibration when the plastering layer is out early. This is how to deal with water seepage from the walls.

1. Causes of the problem:

1. The cause of water seepage on the wall can be judged according to the location, the general toilet seepage to the next door appears at the root of the wall, so the water seepage is more laborious to deal with, and the effect is difficult to ensure ideal, because this is a structural defect, when the general kitchen and bathroom structure is constructed, two common measures will be taken, one is to add 30 50mm plain concrete waterstop on the ring beam, and there is, on the structural elevation, the kitchen and bathroom are 20 30 lower than other structures in the elevation, if the construction unit ignores such construction details, There is a possibility of leakage.

2. There is also a kind of leakage that is not in the roots. It is generally caused by leakage in water supply pipes, which is more convenient to deal with.

Second, the governance method:

1. First of all, the treatment of the first kind of leakage, this leakage must be cured, that is, the root of the wall is chiseled out at least not less than 20 cm high, not less than 1 2 wall thick space, with fine stone concrete [mixed with 5 8% waterproofing agent, filled dense], the concrete is cured with clear water, about 7 10 days, do irrigation test, to ensure that there is no longer leakage, and then use 1:2 cement mortar mixed with 5% waterproofing agent to smooth and calender, after the mortar reaches the strength requirements, restore the decorative surface layer.

2. The second kind of leakage is easier to deal with, chiseled in the heaviest part of the moisture, find the leakage point of the pipeline, reconnect, and now it is generally a PPR pipeline of hot melt connection, and the water test can be carried out after the hot melt connection to determine that there is no leakage, and it can be restored.

By the way, the effect of water seepage treatment is the same on either side, and the parties can choose to deal with it on that side according to the complexity of the surface layer of their house decoration, so as to minimize the loss.

There are many reasons for water seepage on the bathroom wall, and if you want to solve this problem, you must first find the cause of water seepage and prescribe the right medicine. The following is an analysis of several possible situations: 1. Maybe the bathroom waterproofing is not done well, and the water splashes on the wall and seeps out when taking a bath; In this case, it is necessary to re-do the waterproofing.

2. There may be a water pipe interface in the wall, and the interface is not connected well and there is trachoma, and the water leaks out from there and seeps out of the wall; Knock on the wall, change the water pipe, and reconnect. This is less likely to happen. In the first case, if the water seepage point is in the lower part of the wall, it may be the waterproofing problem of your own bathroom; If it is in the upper part, it may be that the upstairs neighbor's bathroom is not waterproofed.

The problem of water seepage can not be underestimated, it is recommended to find a professional master to come to see, I hope it will help you, I wish you a happy life!

You can shovel off the old wall skin and re-mud it, and then the left layer of the basement is waterproofed, and then re-paste the wall tiles.

Water seepage basically has to be redone, first brush asphalt or waterproof mortar.

Redo the waterproofing, that's mandatory.

1. Directly replace the water pipe or repair, if it is the reason for the water pipe, you can replace the water pipe, or you can use a special tape to repair the water pipe, first close the valve, then cut off the water source, open the faucet to the appropriate position, so as to drain the pressure in the water pipe, and then use the special tape to tie up the leaking parts, or seal it with the plugging king.

2. Contact the property, if any problems related to the exterior wall are involved, it is best to reflect to the property of the community, and the property will contact the engineering department for wall maintenance.

3. Redo waterproofing, the owner of the wall leakage at home can buy waterproof materials for plugging leakage and waterproofing, and brush the waterproof materials on the walls and ground of the bathroom, and the best way is to ask professional decoration workers to deal with it.

The treatment methods for stagnant water in the shower room are: installing floor grooves, installing non-slip pedals, laying non-slip tiles, antique tiles, and placing non-slip mats. The reasons for the accumulation of water in the shower room are: waterproof adhesive strips falling off, pulleys, tempered glass, etc.

1. Install the ground pull groove:

Using stone in the shower room can achieve beautiful, non-slip, and rapid drainage. Make a non-slip groove board, and set up a water guide groove around it, so that the sense of space is very strong, much more beautiful than laying tiles, the key is not only non-slip, but also the drainage effect is very good.

2. Install the anti-slip pedal:

Placed directly on the tiles, it can be customized to match the size of the shower room. Common ones are anticorrosive wood, plastic, and melamine resin boards. The best foot feeling is antiseptic wood, the foot feeling is warm (especially in winter), and the water will not soak the feet.

3. Pave non-slip tiles and antique tiles

Choose anti-slip bricks or antique bricks with concave and convex lines, the construction is simple and does not need to consider the details, and it is usually easy to take care of, but the foot feeling is relatively cold, and the anti-skid effect is average.

4. Place non-slip mats:

Placing the non-slip mat is the easiest way, if the tile has been pasted, and you don't want to rework, the non-slip mat is relatively cost-effective. The size and color can be chosen according to your own situation. However, the disadvantage of the best chain of the anti-slip mat noisy stool is that the service life is not long, and it will be replaced in a few months.

Water leakage in the middle of the toilet shower is a very common problem, and if not dealt with in time, it will not only affect daily life, but also may have a negative impact on the home environment. Here are some solutions:

1.Check the tightness of the shower room.

First of all, we need to check the tightness of the shower room to ensure that there are no traces of water leakage at the first side of the doors and windows, floor drains, etc. If a water leak is found, it can be repaired with sealant or other sealing material.

2.Clean up the blockage.

Clogged drain holes in the shower room can also lead to water leaks. Do not clean the drain holes with hard objects or chemicals, which can cause damage to the drainage system. You can use a professional drain cleaner, or you can clean it by hand by placing a waste mask in the drain hole.

3.Replace the faucet.

If the water leakage problem is due to a faucet problem, then we need to replace it with a new one. In the replacement process, you need to pay attention to choosing products with reliable quality and do not choose inferior goods in order to save money.

4.Patch pipes.

If the leak is due to aging or damaged pipes, we need to replace or repair them. This situation needs to be handled by a professional worker or plumber, because repairing the pipe involves water and electricity safety issues.

In short, in solving the problem of toilet and shower leakage, it is most important to detect and deal with it in time. If you can't solve the problem, don't force it, it is advisable to seek professional help.

Judge the cause of the leakage in the shower room, whether the position of the water retaining strip leaks outside, if so, you can buy a better transparent silicone by yourself, and then buy a silicone gun; Then hit the winger on the inside of the water retaining strip with silicone.

If the shower room floor leaks to the downstairs people, this is caused by the waterproofing of the bathroom is not done, this can not be solved, only the original floor tiles are removed, let the waterproof be done twice, and then paste the floor tiles.