If the water meter is not accurate, where can I find it for inspection?

If the meter is not accurate, you can check it in the following ways:

1.Contact the property: The property company can inspect the water meter for you free of charge.

2.Contact the water company: The water company can also check your meter for free.

3.Contact the Bureau of Quality and Technical Supervision: The Bureau of Quality and Technical Supervision can carry out meter inspection and calibration.

4.Contact a third party: There are many third-party agencies that can perform meter inspections and corrections, but there is a fee for them.

Before inspecting the water meter, you need to prepare relevant information, such as water meter**, water meter model, service life, etc. In addition, you need to pay a certain fee in advance, because it is necessary to support the cost of inspecting the water meter.

Water Group. According to the relevant provisions of the state on the installed water meter regular or irregular calibration, if the user has objections to the accuracy of the water meter measurement, put forward the verification requirements, by the statutory measurement verification agency for testing.

If the user has any objection to the accuracy of the water meter measurement and puts forward the verification requirements, if the test is qualified by the verification agency, the user shall be responsible for the testing fee, and if the test is unqualified, the water affairs group shall be responsible for the testing fee. According to the relevant provisions of the Property Law, the water meter belongs to the property right of the owner, and the owner shall bear the cost of replacing the water meter when it expires, and the water group is responsible for providing the corresponding services.

If the water meter is not accurate, you can go to the water company to respond to the problem, and a professional water meter inspection and testing agency can entrust it to carry out verification.

If the water meter is suspected to be inaccurate, the water company must be notified to repair and replace it, and copy the stop code and the initial code.

The calibration of the water meter must be calibrated by a professional organization with measurement qualifications. The water company does not recognize the meter without permission.

If you want to know whether your water meter is accurate, you can use a one-liter bottle (preferably with a scale), turn off other irrelevant faucets, and put ten liters of water relatively slowly, to see if the water meter is exactly a word, the water meter can be accurate to the grid.

If you want to calibrate whether your water meter is accurate, you need to contact the personnel of the relevant departments to come over and calibrate your water meter, as well as debugging, which belongs to their service aspect.

If the water meter is not accurate, then report the problem to the water company, they will send someone to check, if the inspection is really inaccurate, you can change the watch.

If the water meter is not accurate, you can directly contact the water supply company, and the water supply company will re-test the water meter and then calibrate it.

What should I do if the water meter is inaccurate? How do you need to correct the accuracy of the water meter? The water meter is not accurate, you have to find the water company, the water meter is not a person, you can not move it casually, that is legally responsible, so you have to find the water company to give you correction, they are the most accurate.

If the water meter is not accurate, call the water company directly, and let the people from the water company come to check the water meter for you, otherwise the people from the water company you verify will not admit it.

What should I do if the water meter is inaccurate? How to verify the accuracy of the water meter? I think it is indeed more difficult to verify it, if you feel that the water meter is not accurate, you can only pay for it yourself to buy a new one.

If the water meter is not accurate, you can call the water company's ** and ask them to verify the water meter.

If the water meter is not accurate, then you can also check the meter, and the water company will have such equipment to check that your meter is walking very accurately.

If the water meter is not accurate, you can contact the water company, and they will arrange for professionals to verify whether it is accurate or not.

Calibration can be performed with a water meter verification device.

The water meter verification device is a fully automatic water meter verification device, which adopts high and new technology to make the operation convenient, stable and reliable, improve the verification efficiency, avoid human error, and have high cost performance.

Verification principle: a camera device is installed above each water meter, connected to an image collector and a high-speed computer, and the computer automatically identifies the flow indication value of each pointer of the water meter (no longer needs to read the meter by human eyes), and automatically controls it at the same time.

The water flow rate and the water level of the workload meter are measured to obtain the standard flow value, so as to realize the automation of the whole process of water meter calibration.

Summary. Need. Go to the local competent department for testing, the water meter to the water company or the local quality inspection department for testing, and the electricity meter to the power supply department for testing, if it is unqualified, your batch of meters will not be used.

A meter that measures the flow of water. Mostly a cumulative flow measurement of water. Generally, it is divided into two categories: volumetric water meters and speed water meters.

The accuracy of the former is higher than that of the latter, but the requirements for water quality are high, and the water is easy to be clogged when it contains impurities. The meter that records the amount of tap water consumption is installed on the water pipe, and when the user discharges the water, the pointer or word wheel on the meter turns to indicate the amount of water that passes.

The abbreviation of electric energy meter is an instrument used to measure electric energy, also known as energy meter, fire meter, electric energy meter, kilowatt-hour meter, which refers to the instrument for measuring various electrical quantities.

Which department to go to to to detect the water meter.

Need. To the local competent department for testing, the water meter to the water company or the local quality inspection department for testing, the electricity meter to the power supply department for testing, if the comic book is unqualified, your batch of meters can not be used.

A meter for measuring the flow of water. Mostly a cumulative flow measurement of water. Generally, it is divided into two categories: volumetric water meters and high-speed high-section touch water meters.

The accuracy of the former is higher than that of the latter, but the requirements for water quality are high, and the water is easy to be clogged when it contains impurities. The meter that records the amount of tap water used is installed on the water pipe, and when the user discharges the water, the pointer or word wheel on the meter rotates to indicate the amount of water burning that passes.

The abbreviation of electric energy meter is an instrument used to measure electric energy, also known as energy meter, fire meter, electric energy meter, kilowatt-hour meter, which refers to the instrument for measuring various electrical quantities.

To test the water meter, you should find the Municipal Bureau of Quality and Technical Supervision.

1. Residents can go to the business office of the water affairs group in the jurisdiction to apply for the school meter, and pay a certain fee in advance, the business office will arrange the staff to send the water meter to the Municipal Bureau of Quality and Technical Supervision for testing with the user, if the water meter is indeed inaccurate, the water group will change the meter for the user free of charge and refund the fee.

2. If the user wants to apply for correction of the large-caliber water meter, he should apply directly to the Municipal Bureau of Quality and Technical Supervision.

The Bureau of Quality and Technical Supervision is one of the national functional departments, the State Bureau of Quality and Technical Supervision, in 2001 and the State Administration of Entry-Exit Inspection and Quarantine merged to form the General Administration of Quality Supervision, Inspection and Quarantine, is at the ministerial level. The provincial bureau shall set up a quality and technical supervision bureau below the provincial level, and the provincial bureau shall implement vertical management below the provincial level for the quality and technical supervision bureaus of cities, counties and districts. According to the 2011 No. 48 document of the State Council, the management system of the Quality Supervision Bureau was reformed.

At present, it is possible to adopt a hierarchical management.

It is necessary to install a water meter at home, the water meter can detect the water consumption at home, and what unit can the water meter detection go to?

1. What unit does the water meter test to?

1. If you want to test the water meter, you can test and correct the water meter through the local Municipal Quality and Technical Supervision Bureau. For example, if there is a fault in the tap water meter used by ordinary households, for example, there is no water in the home, but the meter will be removed, or the water meter is inaccurate, you can go through the relevant business office of the local water affairs bureau.

2. Submit the application first, pay a certain fee in advance, and then the company's staff will send the water meter to the local supervision bureau for testing. If it is indeed because the meter is faulty and the problem is really inaccurate, the water company will replace the meter for the user free of charge, and will also refund the fee paid.

3. There may be some customers who want to apply for the correction of water meters with a larger caliber, in which case they can also apply through the local Municipal Bureau of Quality and Technical Supervision. Because it is a national functional department, it can supervise and manage its subordinate water companies.

Second, the reason for the idling of the water meter.

1. There will be various problems when using the water meter, such as no pipe leakage or toilet leakage at home, and the water meter is still rotating in the absence of water in the Imperial Tomb, which can be called idling.

2. Idling can be divided into three kinds according to different performance characteristics, one is that the rotation is sometimes faster and sometimes slower. There are also positive reversals, that is, one moment forward and one moment reversed. Sometimes it rotates forward, but the speed is slower and more uniform, and this phenomenon is actually relatively rare, mainly because of the valve leakage.

3. Idling may occur because your home is relatively high, or there is no one living in your home for a long time, and some water pipes have been useless for a long time. It may also be caused by the fact that there are many elbows in the water pipe, there is air leakage, or the current water pressure is low and unstable.

Summary. Hello, if there is a problem with the water meter, you can't find the property company, you should go to the Technical Supervision Bureau for identification and testing. Or if there is a problem after checking, then directly replace a new water meter, take the receipt to the water company to apply for a water meter replacement, and you can't replace the water meter privately.

If the water meter is not accurate, find ** inspection.

Hello, if there is a problem with the water meter, you can't find the property to sell the front collapse division, Zhongyuan should go to the Technical Supervision Bureau for identification and testing. Or if there is a problem after checking, then directly replace a new water meter, and base game to the water company with the receipt to apply for a water meter replacement, and cannot replace the water meter privately.

The common faults of the water meter are: 1. The rotation of the water meter is sometimes found when the water meter automatically rotates, and the rubber finger appears this, and when the Sui situation occurs, it is mainly caused by the unstable water pressure in the pipeline, and it may be: the battery has no electricity, and the valve must be closed immediately, and the water supply department will come to the door to know the distribution and treatment, so as to prevent the impact on household water.