What should I do if the floor has been installed and I find cracks?

Try to wring out the mop before use, before cleaning should be used to vacuum the dust and so on, to avoid sand scratching the surface, after cleaning you need to wait for the surface to dry before waxing, to dry the wax to wipe along the wood grain. Find the installation position of the skirting on the wall along the bulging floor, pry the skirting apart, see if the expansion joint has been attached to the wall, and re-lay the warping part. Mop the floor with a wet mop every day to increase the humidity of the floor, no need to shake it too dry, no dripping, put some 84 disinfectant in the mop water, don't worry about dampness and mold.

For less severe cracks, you can fill the floor cracks with some mixture (e.g., caulk); If the cracking situation is more serious, the only way to solve it is to replace the cracked part, and the wood floor is prone to peeling and cracking if you don't pay attention to it, which will greatly affect the appearance. Then when dealing with the boundary, we must do a good job of waterproofing to prevent the board from being harmed by water. Keep the humidity in the room and avoid sun exposure.

<> if the cracking of the floor is serious, it is necessary to remove all the floors and replace them with normal or part of the floors. Floor slabs crack lightly, and cracks can be filled with mixture. If the cracking is severe, replace the cracked part.

As a reminder, it is best to wait a week for the floor paint to be applied before you can move and place the furniture on it, otherwise the paint will not be strong enough. If the scratch is deep, go to the building materials hardware store to buy caulk for the wood floor, or fill the depression with fine sawdust + water-based silicon close to the color of the wood floor, and then smooth it.

In practice, the engineering quality inspection agency shall conduct quality inspection on the commercial housing, and determine whether it seriously affects the normal residential use according to the conclusion of the quality inspection. Therefore, families who lay wooden floors should pay more attention to the maintenance of wooden floors, and at the same time, choosing large brands of wooden floors will have warranty and excellent after-sales service.

If it is a solid wood floor, a little crack can be called the floor factory to deal with it can be repaired, if the composite floor is disassembled and replaced with a few pieces, the composite floor is a good replacement of viscose.

Mix putty with paint and embed cracks, which can not be damaged for many years. Cut the old newspaper into crumbs, add alum and water, boil it into a thick paste, and then use a knife to stuff the paper paste into the cracks, and when it dries, it will be very strong. Burn it with cotton cloth or broken sack to ashes, then mix it with raw tung oil to form a paste, and embed it in the cracks in the floor.

It can be firm after drying. Buy "bakelite powder" with a saucer, drip in water and stir until the slurry, then brush the cracks, spray in water slightly, fill in bakelite powder, usually one night bakelite powder can be dry and hard, and the wooden floor can be stepped on as usual. In particular, the wooden floor is most afraid of moisture, if it is in a humid condition for a long time, it will produce rot and mildew, so it is not possible to use a wet mop to clean the work, try to wring out the mop and then use it, and the dust should be sucked clean with a vacuum cleaner before cleaning, so as to avoid sand from scratching the surface.

At this time, it is very good to have cracks, you can modify them in time, and if it is a decoration company to install, you can find a decoration company to carry out after-sales service.

You can find relevant personnel to reinstall it, so that it is very convenient to maintain it in the future, and the home is also more beautiful.

In such a situation, you can only disassemble the individual and reinstall it, because if it is not installed, it will be a big trouble for the Hakkas.

Pry it open and reinstall it so that you can put the new floor on it and there will be no cracks.

Mix with putty and pigment to evenly embed the cracks, which can not be broken for many years. Cut the old newspaper into shreds, add alum and water, boil it into a thick paste, and then use a knife to push the paper paste into the cracks, and when it dries, it will be very strong. It is burned with cotton cloth or broken sacks to ashes, and then mixed with raw tung oil to form a paste, which is embedded in the cracks of the floor.

It can be very firm when dried.

will be bought"Bakelite powder"Fill in the plate, mix and drip water to the paddle shape, then brush the cracks, pour in clean water, fill in the bakelite slurry, generally a night time bakelite powder can be dry and hard, the wooden floor can be stepped on as usual. Special tips Wooden floors are most afraid of water, if they are in a wet state for a long time, they will produce rot and mildew, so do not use a wet mop to clean, try to use a wrung out mop to re-occupy, before cleaning should use detergent to absorb the dust, which can avoid scratches on the sand surface, and after cleaning, it is necessary to carry out dry treatment such as surface waxing, and wipe along the lines with a dry cloth when waxing. According to the relevant national regulations, under the current construction technical conditions, it is inevitable that there will be a certain degree of cracks, but the shape, number and width of cracks should be controlled within a certain range.

If it is a foundation settlement crack and other penetrating and structural cracks that may endanger the safety of the house structure, the wall cracks should be reinforced accordingly immediately. After the crack is discovered, the designer, construction party and other responsible parties shall entrust a third-party engineering quality inspection agency to conduct a re-inspection. After determining the nature of the crack, the responsible party should communicate with the lessee to issue specific repairs and solutions to the crack.

If the settlement of the foundation of the commercial housing is tested by a professional testing agency, which seriously affects the quality of the house, the owner can request to terminate the contract and choose to move out; However, if there is a foundation settlement, but after the quality inspection of the commercial housing by the testing agency, it is believed that the reinforcement and repair can ensure the safe living and use, the contract does not need to be terminated.

If it's in a corner where it's not very conspicuous, leave it alone, and if it's very conspicuous, I think it should be cleaned up in time, and then replaced with a tile.

First look at the position of the crack, whether it can be blocked with some furniture, if it really can't work, then you need to re-cut off the floor and reinstall it.

You can buy some special sewing agents to supplement, which is not only beautiful, but also very convenient, and it is also very convenient to clean.

That's the only way, because if you want to replace it, you need to remove all the floors and reinstall them, which is very troublesome, because solid wood floors are easy to crack.

I can glue these cracks so that they don't have them, maybe I can put some cement in the cracks to smooth them out.

At this time, take out the floor and reinstall it, after the floor is installed, cracks appear, indicating that the construction workers have not done a good job, you can find a decoration company for after-sales.

In such a situation, I think you can buy some sewing agents, and then use these sewing agents to fill, be sure to repair the sewing agent flat, and you should also choose the right color.

You can pry it up and replace it with a new floor, or you can replace it separately, so that it can be more comfortable when you use it in the future.

1. Cracks on the surface of the wooden floor: If there are small cracks on the paint surface of the wooden floor, it may cause the paint film of the floor to fall off, and most of the causes are due to the drying of the floor caused by the exposure to the sun or the long-term wind blowing, which causes the floor to shrink and causes cracking. The solution to this situation is usually to sandpaper the worn area first, and then touch up the paint and wax. Re-coat.

2. If the cracks in the wood floor as a whole are serious, the cracked floor can only be removed and then reinstalled. If the crack is light, some mixture can be used to fill the crack.

3. The main reason for the gaps in the floor is that there are too many gaps in the wood floor during installation, if the gap between each floor exceeds 2mm, it needs to be repaired, and if the gap is small, there is no big problem, because the shrinkage of the floor is not the same with the change of seasons.

4. Floor cracking In autumn and winter, the wooden floor may have cracks because of the season, which is also a relatively normal phenomenon, and because the moisture in the air in the autumn and winter is relatively dry, and the main reason for the cracking of the wooden floor is caused by the loss of moisture.

Why is the floor cracked? What to do?

Hello dear and happy to answer for you. Kiss for you to find out how to repair cracks in the floor:1

Surface paint crack repair treatment, small cracks appear on the surface of the floor paint, serious conditions, resulting in paint film peeling. As the floor is exposed to sunlight or long-term wind, the floor dries and shrinks, causing the paint film to crack. Solution:

Buy a better floor wax with a color substance and a similar color to the floor color, and then the wax, the effect is good and the bracket marks are not seriously ,..2.During the repair of cracks in the floor floor, it may be necessary to use some mixture to fill the cracks in the floor in case the lighter floor has been cracked; If the crack is more severe, the only way to solve it is to replace the cracked accessories, and the consumer can contact the factory to purchase the required model conversion.

3.Gaps between floors should be repaired. If the gap between the floors is more than 2 mm, it needs to be repaired.

The above is all my reply, I hope it can help you, I wish you a happy life

Hello dear<> There are cracks on the side of the new floor. The reasons are as follows: 1. Cracks may be the result of weather changes, and usually Hyohan occurs after a long period of time. This may be a general form of wear and tear, and over time, the adhesion of the tile to the substrate decreases.

2. Cracks in the floor can also be caused by poor workmanship. Especially if it has not been installed recently, cracks can be a sign of improper installation3 and the type of flooring you have chosen may not be suitable for use in certain rooms. It is advisable to check with your flooring contractor to see if the recommended flooring products are suitable for use in areas such as kitchens and balconies.

Pro-<>

The floor is subjected to more friction every day, it is inevitable that there will be different degrees of cracks, once the floor has cracks it looks very unsightly, if you want to repair the floor, what are the tips for repairing the cracks in the floor? Let's learn together;

1.Repair of cracks in the surface paint.

If the surface paint layer is cracked and the crack area is small, then you can repair the paint and wax appropriately, but if the area is relatively large or the situation is more serious, then it is necessary to polish and smooth before painting.

2.Repair of cracks in floor panels.

For floors with light cracks, you can use some mixture to fill the cracks, and if the cracks are severe, replace all the cracked parts.

3.Repair of gaps between floors.

If the gap between the floors is more than 2mm, then it needs to be repaired, and in serious cases, it is necessary to disassemble all the floors, resurface or replace part of the floor according to the situation, at this time, it is still necessary to reserve expansion joints to prevent the floor from expanding when wet.

What causes cracks in the floor?

1.There are no reserved expansion joints.

The floors are spliced together piece by piece, and there should be expansion joints between the two adjacent floors, otherwise, in cold or dry weather, the floor is easy to shrink, and in wet or high temperature, the floor will expand, which will lead to cracks in the floor.

2.No attention is paid to moisture protection.

The floor is made of wood, and the wood will also absorb water more easily, so the floor will crack due to water absorption and expansion if it is not properly treated against moisture.

3.Exposure to the sun.

After the paint surface of the floor is exposed to the sun for a long time, it is prone to aging and peeling, which leads to cracks.

4.Improper maintenance.

If the floor is not properly maintained, such as drenching the floor with water or using alkaline water and soapy water to scrub the floor, the floor will have cracks, and if the air conditioner is turned on too much, resulting in too large temperature difference between day and night, it will easily cause cracks in the floor due to thermal expansion and cold contraction.