What should I do if I don t have underfloor heating and want to use heating?

Of course, there is a way, with a gas wall-hung boiler with a radiator (a group of each room, according to the size of the area and layout design of the heating), connected with surface-mounted pipes, but you need to find professional personnel to design the pipeline and location for you, if you have experienced designers, the design of the pipeline will not be obvious, the public area will not see the open pipe, only the bedroom will see, but it is also very hidden, our home is just safe, not as ugly as imagined, in the Haute residential technology security, it is recommended that you check it on the Internet.

It is better to use radiators, the temperature in the house is uniform, and it is easy to repair and replace water leaks. The floor is warm and the cold place is very cold, and the hot place is very hot, and it is easy to get angry, headache, nausea, cough and phlegm

I don't want to eat, because the ground is very hot, the furniture is easy to deform, and the wooden floor can not be paved, it is easy to deform, because the ground is too hot to raise the flowers are easy to die, unless the flower pot is raised with something, or the radiator is good!

The house with floor heating is particularly dusty, all kinds of inhalable particles and particularly dry, especially for children, and the dust particles that cannot be seen by the naked eye are suspended in the house, which is harmful and great! Radiators are certainly stronger than underfloor heating in this regard.

Heating facilities: Floor heating is one of the most environmentally friendly and physically comfortable facilities, while radiators occupy space but are the most reasonable facilities in terms of physical comfort and environmental protection.

The biggest drawback of floor heating is that it is too troublesome to maintain and the cost is the highest, you have to smash the floor tiles or floors to repair, in case it leaks downstairs, it is unlucky!

Floor heating raises the temperature of the feet and legs, and goes outside in winter, changing from 25 degrees to sub-zero temperatures, so that the legs below are cold, and they get joint and bone diseases.

What should I do if I don't have underfloor heating and want to use heating?Hanging heating is actually better than floor heating. Hanging heating is installed under the window, there is a leak can be found in time, maintenance does not need to hit the ground, and it is better to control than floor heating, and the heating valve can be turned on and off at any time to control the heat in the house.

Hanging heating is a traditional heating method, and it is also the best to use.

This can only be installed with radiators, and this floor can only be installed if it is changed.

You don't have to have floor heating to use heating, friend.

Do the math how much it will cost you to renovate your home

For friends in the north, floor heating is very familiar, but many friends in the south may not be particularly familiar, because the south does not have central heating, and many families did not install floor heating when they were renovated at the beginning. Today, I will introduce you to some ways of heating.

First, if there is no underfloor heating, what remedies are there.

1. The wall-hung boiler can be installed directly, and there is a wall-hung boiler that can be hung directly on the wall. This method of heating can achieve the advantages of underfloor heating, and there will be other benefits. For example, if you want to install a wall-hung boiler in the later stage, it will be very convenient, and the installation cost will be relatively small.

If the installation is floor heating, you also need to chisel the ground, and you must first lay the floor heating pipes before you can install tiles, but the choice of wall-hung boiler is very simple, it can be hung on the wall, and this wall-hung boiler is also more environmentally friendly, and the heat it provides is also sufficient. It is also very convenient if you want to transfer it, and it is easier to repair.

2. You can also install electric floor heating at home. There is a carbon fiber electric floor heating, which is also very popular now, its heating effect is also very good, and the installation is relatively simple, not as complicated as floor heating laying, which is the way that many families choose.

3. In addition, we can also install wall heating, the installation project is not particularly complicated, we need to dig pipes on the wall, and then lay the pipes on the wall, which can also achieve the effect of heating. If you want to transfer in the later stage, it is also very convenient, and the laying cost is not so high, and you can generally afford it.

4. It's really not good, we use traditional ways to heat, such as turning on air conditioning, but there are some weaknesses in air conditioning, such as the heating effect is not particularly good, and the indoor will be very dry, the human comfort is not particularly high, and the other point is that it is very electricity-intensive, and the monthly electricity bill will be relatively high.

Second, the hazards of floor heating.

If you don't install underfloor heating, there are actually certain benefits. Because if it is used for a long time, it will also affect the health of the human body. Many people have reported that there will be some impact on the eyes, resulting in vision loss, and even cataracts, mainly because the temperature is relatively high after the use of floor heating, and the human body is in a state of high temperature for a long time, which will disrupt the biomagnetic field of the human body, especially for the elderly, children, and pregnant women.

Summary: If you don't have underfloor heating installed at home, there are actually many other heating methods, and we can choose according to our needs.

Enter the area and get the decoration for free**].

There is underfloor heating in the house, but the central heating is not available, can it be changed to gas heating?

Hello Kiss is happy to answer this question for you. <>

There is underfloor heating in the house, but the central heating is not available, can it be changed to gas heating? : Underfloor heating can be changed to natural gas heating. 1. Just add a small natural gas boiler.

2. Floor heating is a system, which is divided into heat source, temperature control, and floor heating pipe circuit, which can be freely matched. The heat source can be central heating, or it can be a wall-hung boiler, or a heat pump, and natural gas is a wall-hung boiler. 3. Natural gas heating is to install a wall-hung boiler in the kitchen or balcony, and the wall-hung boiler burns natural gas to achieve the purpose of heating.

4. Advantages of natural gas floor heating: the heating time can be set freely, and it can be turned on and off at any time; There are no radiators exposed in the room, and the usable area of the room can be increased by 2% to 4%, which is convenient for decoration and furniture.

When it comes to floor heating, I believe that friends in the north are more familiar with it, because the temperature in the north is low in winter, and many owners will install floor heating to heat their homes. However, now there are many southern friends who also want to install floor heating, but the home has already been renovated. So how to remedy the lack of floor heating at home?

If the ground material has been installed, you can choose to install the radiator surface, although it is necessary to open the hole in the wall and see the gusset of the pipe, but it will not affect the ground decoration of the home; Secondly, you can directly buy an electric radiator, but because of its high power, you need a sufficient power load; Finally, the wooden floor can also be dismantled and a heating film can be installed, but the service life is not as good as that of floor heating, and the maintenance rate is high.

What are the ways to heat your home:

1. Gas wall-hung boiler.

Gas wall-hung boiler is a new type of heating equipment that is very popular in recent years, which can not only be installed on the wall in terms of volume, but also easy to use to meet people's daily demand for hot water. At the same time, it uses gas heating, so it saves a lot of energy.

2. Central heating.

Central heating is more common in the north, and heating is a heating method operated by heating companies and developers, etc., and the heating is delivered to each household through pipes. The owner only needs to pay the relevant heating fee to enjoy this service, which is convenient and convenient, mainly because the heating fee for central heating is cheap and safe, so it is deeply liked by the owner.

3. Radiators.

The radiator is to make the indoor temperature achieve the heating effect by continuous heating, which has the characteristics of fast heating speed and simple operation, and the heating effect is good, especially the surface-mounted radiator, the pipe is directly exposed to the outside without blocking, and the heating effect is better, so it is deeply loved by consumers.

Summary: The above is for you to introduce how to remedy the lack of floor heating at home and what are the relevant contents of home heating, I hope to help friends in need, if you need to know more about relevant knowledge in the later stage, welcome to pay attention to Qeeka Home.

Most of the heating in the north relies on floor heating or radiators, so who is better? More and more friends in the north are not installing floor heating. Why is underfloor heating not as good as radiators? Let's follow Jin Jin to find out.

1. Comparison of installation costs.

In this way, the wall-hung boiler needed for floor heating costs 5,800 yuan in China, and about 10,000 yuan imported from abroad. Then there is the construction of floor heating pipes, 1 pipe laying ** in 110 yuan, the construction area is 100, and then the coefficient to be multiplied, the approximate range is 65 of the heating area.

After the installation of floor heating, choose a medium domestic wall-hung boiler 6,000 yuan, and the floor heating construction is 7,000 yuan, which is almost 10,000 yuan.

The radiator is relatively cheap, first look at the material of the radiator, the brass radiator is expensive, the copper-aluminum composite radiator is moderate, and the cast iron radiator is cheap, then we choose the copper-aluminum composite, 50 120 yuan a piece.

Secondly, it depends on the heating area required by the family, which is generally calculated as the area of the suite, including the living room, bedroom, kitchen and bathroom, we take 100 as an example.

After looking at the wattage of the wall-hung boiler, the domestic one is lower than the imported one, so choose a 6,000 one. In total, 100 houses need to be 10,000 smaller to install radiators.

Therefore, for the installation cost, floor heating is about 2,000 more expensive than radiators, and families with less budgets still need radiators, after all, personal economy is a big factor restricting the development of floor heating!

Second, the occupied area comparison.

Floor heating is installed on the ground, 5 8cm is needed to bury the pipe, plus the ground is paved with tiles or floors, occupying more floor height area, the floor height of the commercial house itself is meters, if the ceiling is also suspended, the floor height is left in meters.

The radiator is installed on the wall, which does not occupy the height of the floor, it occupies the area inside the set, and the volume is small, so it will not get in the way.

It can be seen from this that floor heating occupies more area than radiators, and homes with high floors are not suitable for installing floor heating.

3. Comparison of repair and maintenance difficulty.

Because the underfloor heating is installed under the floor material, if there is a problem or the underfloor heating pipe needs to be maintained, the tiles or floors must be removed, which not only costs a lot of maintenance, but also adds to the cost of reinstalling the floor.

The repair and maintenance of the radiator is very simple, and the radiator is directly renovated, which basically does not affect the use of other furniture.

For repairs and maintenance, radiators are superior and incur less expense than underfloor heating.

Fourth, there are requirements for ground materials.

Unlike radiators, which can be arbitrarily selected as the floor material, the installation of floor heating requires higher materials, especially wood floors. In order to reduce the budget, some families choose laminate flooring or laminate flooring for their rooms, but this is not suitable for installing underfloor heating.

Because they are all glued and contain formaldehyde, and then after the temperature blessing of floor heating, formaldehyde emission is more serious, and then threatens our health.

Therefore, the floor heating must choose a wood floor with a high degree of environmental protection, or tiles.

1. The difference in comfort.

Floor heating has always been considered one of the more comfortable heating methods, people first feel the temperature is the soles of the feet, so in winter can not only provide warmth to people, but also can play a good role in improving the blood circulation of the human body, which is conducive to human health. There are two types of radiators: water heating and electric heating: water heating burns steam or hot water through the boiler and transmits heat to the radiator through the pipe; Electric radiators heat the water or oil in the radiator by heating the electric heating element in the radiator, and then the heat is transported by the radiator.

The working principle of radiators is to form a convection flow with the cold air in the house by heating the nearby air, the cold air is circulated and heated, and the hot air is circulated and flowing. There will be a feeling that it is closer to the radiator, warmer and farther away, or not warmer.

2. The difference in aesthetics.

Floor heating is a hidden project, and the overall home design of the home is not affected, and the aesthetics are not affected under normal circumstances. However, if the indoor floor height is not enough, it will cause the house to be very oppressive and cause a bad impact on the overall visual beauty. Radiators will also occupy a certain position in the home, especially near the radiators to leave a distance to ensure that they are not affected by direct heating, which can be a bit troublesome when designing.

However, at present, the new radiator will not affect the aesthetics of the interior decoration through its beautiful appearance, but can play a role in setting off to a certain extent.

3. The difference in heating rate.

Underfloor heating is slower and generally needs to be turned on for a long time to achieve optimal comfort. Because the floor heating uses low-temperature hot water radiation, especially the wet floor heating, the cement mortar layer needs to be heated first. The heat dissipation is slower, and the underfloor heating lines are long, so it takes a certain process to heat the room.

The heating rate of the radiator is much faster than that of the floor heating, and you can feel the warmth after turning on the radiator for about half an hour. Intermittent heating is possible, which is more convenient.

4. The difference in the ease of installation.

The amount of floor heating project is huge, in addition to the laying of floor heating pipes, a variety of leveling technologies are also required, and only the rough house can install floor heating. There are two kinds of floor heating: wet floor heating and dry floor heating, water floor heating is installed in the floor layer, which needs to be poured concrete, and dry floor heating can be laid directly under the floor. There are two ways to install radiators, both open and concealed, and both can be used in the blank room.

If you choose concealed installation, the construction is slightly more complicated, because the concealed pipes need to be hidden. The house that has been renovated can only choose to be surface-mounted, the advantage is that the construction period is short, but it is convenient and fast.

6. The difference between maintenance and service life.

Floor heating is a durable product, with a long service life, and the service life is basically synchronized with the building, but the floor heating is laid under the floor, and it is quite troublesome to repair. The service life of steel radiators is about 5-15 years, and the service life of copper-aluminum composite radiators is basically more than 20 years. The radiator is also relatively simple in terms of maintenance, if you need to clean it after blockage, open the slipknot and let it through, and only need to change the pipe fittings if it leaks.

If you use a steel radiator, you need to maintain it with full water to ensure that the oxygen content of the heating is low and reduce corrosion. Copper-aluminum composite radiators do not need to be fully watered for maintenance.