Is there any fashionable way to tie the thin straps on the sides of a winter woolen coat?

The belt of the woolen coat can be played in many ways, the simple and ordinary way to play is the bow, many people know how to tie the bow since childhood, so for this way of playing, many people should know, first of all, you still have to tie a knot on your body first, and then alternately thread left and right to make a bow. Although the way to play the bow is very simple, it is still relatively mediocre, but in general, it is also a cost-effective way to play, which is easy to learn and not ugly.

The bow tie on the back is also a good way to tie the knot, which can be more difficult, as the knot of the belt is tied behind the back, and you may need to use the strength of others or look in the mirror to tie it. The effect is like a bow tie, first the belts are crossed together, then one is turned around the other, and then tied like a tie, which still looks quite special. It's hard to understand just by looking at it, but you still need to practice more, and you can usually let your husband play for yourself, and exercise your husband's tie ability.

Buckle-loop belts are usually shorter in length and bows are not appropriate. Therefore, it is more suitable for casual and simple ties. Slipknots or flat knots are beautiful.

The belt is crossed up and down, and the side with the buckle is a little shorter in length and placed underneath. The belt placed on the top bypassed the shorter belt and was tightened, and the upper belt was still on top. Go down the upper belt, tie a knot around the lower belt, pull out the upper belt, and the knot is finished.

It's easy, right?

Single bow, some people will feel that the bow is not their own style, then, this single bow tie can try more, cross the belt up and down in the shape of "again". Thread the upper strap through the bottommost waistband. Will do the left side of the belt folding.

Tie the strap that has just been around the bottom and tie it around the band that has just been folded. Adjust the bow shape.

You can make a casual knot with the belt crossed up and down, and the side with the buckle is a little shorter in length and placed underneath. The belt placed above wraps around the shorter section of the belt and goes out of it to tie the first knot. It's so simple and it's relatively neat, and it's also easy to learn.

The belt is crossed up and down, with the side with the buckle below, pull up the side with the buckle, go around the inside of the other side, and then pass through the circle in the middle. It's simple, and there's basically no shape, but if you look good, the bow is still a good choice.

Many women yearn for bows, but they just don't know how to tie them, at that time I just followed the ** learned, cross the belt up and down, fold the belt above, wrap the lower belt around the folding belt, fold it after wrapping, and then fold the top through the knot and pull out the upper belt.

Whether it's a trench coat or a coat, a belt is always the most beautiful embellishment. Especially when the belt and the rosette collide, it is sure to add infinite charm to the fashionable trench coat. The length of the belt at both ends.

Fold the short end in half. The short end has been folded in half as the center point, and the long and short ends are wound as petals.

The steps for knotting coat straps are as follows:Material preparation: coat belt.

1. The belt is crossed up and down next to the base, and the length of the side with the buckle is slightly shorter, and it is placed below.

2. The belt placed on the top bypasses the shorter belt.

3. Wrap it around the inside and tie the first knot.

4. Then pull the left belt and wrap it around the short belt on the right.

5. Pull the head of the left belt of the oak and pass it through the knot.

6. Tie the second knot of the liquid reputation, and the belt has been tied at this time. Isn't it pretty.

Knotting method of clothing straps: single tail type, double tail type, tight type, bow tie type.

1. Single tail type

Slip the belt into the buckle. Make a loop and thread the initial end of the belt through the buckle from bottom to top. Go through the freshly made circle from top to bottom. After completion, you can freely adjust the length of the sag by passing it through the loop you just made several times.

2. Double tail type

The belt starts with one end at the top and the buckle at the bottom and crosses each other. The initial end is threaded from the bottom up through the belt that clings to the part of the garment and tied in a knot. Make a circular motion and let the starting end go down from top to bottom again through the belt that clings to the part of the garment.

Let the initial end pass through the circle you just made, adjust the shape and you're done.

3. Firming type

Buckle the belt to the last hole. Let the initial end pass through the hole on the left side where the belt is secured. Go through the part that was originally close to the innermost layer of the garment. Once again, go through the hole on the right to secure the belt and you're done.

4. Bow tie type

The belt starts with one end at the top and the buckle at the bottom and crosses each other. The initial end of the belt is wrapped around the end with the buckle and made a circle. Wrap the initial end of the belt around the back of the cross and run it through the loop from the bottom up.

Adjust the shape of the knot to the bow tie and you're done. In this way, the clothes are tied with simple and stylish straps.

Here's how to tie the coat belt:Tool: One coat.

1. Two lines intersect, located on the upper floor, Line 1 is slightly longer than Line 2, and Line 1 is folded in half at 1 3.

Wear the number on the line, and pay attention to the position where the hand needs to be balanced.

Turn the line down, and pay attention to the parallelism of the labels.

4. Roll up the line 2 in parallel, and fold back a part of it, the length of which is slightly longer than the length of the line 1.

5. Bypass the No. 1 baseline around the folded No. 2 line, and fold it at an angle parallel to the No. 2 line to form a bow shape. Pay attention to keep the line flat when passing down, and the line is fit between the lines, and you must not tighten it.

6. Finished bow finish.

1. First wrap the belt around the back of the body, stretch it into a long and a short, and press the short one on top of the long one.

2. Fold the long one upwards and bypass the short belt through the triangle area surrounded by the two belts.

<>5. After folding in half, pull out the folded part from the knot that is wound out. Once tightened, a simple belt knot is fastened.

How to tie a knot in clothes with two straps1. It looks better to tie a bow, first wrap the strap of the clothes into a loop from the back.

2. Wrap the strap back from back to front.

3. Make a loop underneath the strap that comes back and pinch it with your thumb.

4. According to the above method, wrap 2-3 times according to the length of the clothes strap.

5. Thread the strap of the garment into the ring pinched by your thumb and tighten the knot.

1. Cross the two straps first, one on the top and one on the bottom.

2. The upper strap bypasses the lower belt, and then hangs down from the middle of the two straps and tightens it, and then ties a slipknot.

3. Fold the strap below into an S shape on one side of the bow and place it on the right side in the direction of the ribbon.

4. Then use the top strap to wrap it from the top to the bottom of the bow.

5. The top strap wraps around the bow on the right side and folds into a bow on the other side.

6. Slowly arrange the formed bow.

7. After a little more tidying, the beautiful and flat bow will come out.