When decorating, whether to lay the floor or tiles first

When it comes to interior decoration, in general, we lay the tiles first, and then the flooring. This is because the laying of tiles requires the application of cement mortar, which can cause damage to the floor if it is laid first. Moreover, the laying of tiles generally involves the bathroom, kitchen and other places, and the decoration of these places is usually carried out earlier, so the laying of tiles is usually carried out first.

With the decoration device, you only need to enter the area + city, and calculate the most affordable local market in 3 seconds**: [Tuba Rabbit Big Platform Counts**].

No longer worry about the company's price increase, omission and price increase.

In the local market, the range of ceramic tiles is relatively large, generally speaking, ordinary tiles range from tens of yuan to hundreds of yuan per square meter, while high-end tiles may be as high as several thousand yuan per square meter. There is also a large gap between the flooring, cheap composite flooring may only cost tens of yuan per square meter, while solid wood flooring may cost hundreds to thousands of yuan per square meter.

When choosing tiles and flooring, in addition to the best factors, you also need to consider their durability, aesthetics, and matching with the overall decoration style. Generally speaking, ceramic tiles are suitable for use in places with high humidity such as bathrooms and kitchens, while flooring is more suitable for use in living rooms, bedrooms and other places. If you have a good budget, you can choose better quality tiles and flooring in more styles to enhance the overall decoration effect.

In general, the decoration should be tiled first and then the floor, which can avoid damage to the floor, and at the same time can better plan and arrange the decoration work. When choosing tiles and flooring, factors such as quality, style and so on should be comprehensively considered to achieve the best decoration effect.

According to the decoration procedure, after the completion of the water and electricity renovation, the floor tiles can be paved, and the wood floor liquid is carried out when the overall interior decoration is basically completed. Therefore, when decorating, tiles are laid first, and then wooden floors are laid.

For the owners of the first time to install the group before repairing, it is inevitable that there will be one or another question. For example, should the new house be decorated with floor tiles or wall tiles first? What do you need to pay attention to when decorating tiling? Don't worry, if you have any questions about this, you might as well follow me to find out.

It doesn't matter if you lay the wall tiles first or the floor tiles first, that's allowed. But you need to figure out these 2 questions:1

whether it is conducive to the project of early construction; Two. Whether it is conducive to the construction progress, if this question is positive, whether it is the construction of wall tiles or the construction of floor tiles first, it is okay.

For the decoration company, the correct approach should be to lay the wall tiles first, and then lay the floor tiles, because the wall tiles are paved and then the floor tiles will not have the slightest impact on the early stage, and will not delay the construction period, so the decoration company will adopt this approach. If you first pave the floor tiles and then pave the wall tiles, you must wait until the floor tiles are fixed to be searched before you can pave the wall tiles, generally not less than 24 hours is appropriate, otherwise there will be hollowing, loosening and other phenomena in the future use process.

What do you need to pay attention to when decorating tiling.

First, the precautions for laying wall tiles:

1. When you carry out the base treatment, you should clean up the dirt on the wall and soak it one day in advance. If the base layer is a new wall, when the cement mortar is dry, the wall tiles should be glued.

2. Before pasting, the tiles must be soaked in water for more than 2 hours until the bricks do not bubble, and then take them out to dry.

3. In the process of laying and sticking, if it is encountered with pipelines and toilet equipment, it must be cut with complete bricks, and it is never allowed to use fragmented tiles to put together.

Second, the floor tile laying precautions:

1. It is necessary to remind everyone that there should be a slope of flowing water in the kitchen and bathroom, so that there will be no water accumulation and backflow in the future use process. If the original waterproof layer is damaged during the construction process, the waterproof treatment must be done, and no leakage shall prevail within 12 hours.

2. After the floor tiles are paved, paper needs to be used to protect the brick surface, and it is necessary to walk around on the brick surface after 24 hours.

Summary: After reading the above introduction, I believe you have a further understanding of whether the new house decoration is to pave floor tiles or wall tiles first. If you want to know more about it, please continue to ****** and there will be more exciting content in the future.

It is recommended to lay floor tiles first, then wall tiles. This is because floor tiles require a flatter foundation of the core, while wall tiles can be adjusted according to the height of the floor tiles. If the wall tiles are laid first, it may cause the height of the floor tiles to be uneven enough, which will affect the appearance and make the effect of wild oranges.

In addition, after laying floor tiles, the ground can be better protected and avoid damage to the ground during construction.

Buying a house in the real world is very difficult. Many people struggle for decades to buy a house. When decorating, it is essential to pay attention to details, as the house needs to be lived in for decades.

Life is so helpless. I have been busy for most of my life, just to have my own home in the city where I settled and decorate a home that I am satisfied with. The decoration is divided into interior decoration and outdoor decoration.

Outdoor renovation refers to the outdoor decoration of a house. Interior decoration refers to the construction activities of the owner to decorate the interior of the house after the completion and acceptance of the house. House decoration is a major event in every family, and everything should be prepared before decoration.

Before the decoration, first of all, you must determine the style of your own decoration, and then ask a professional designer to check the room, have a general understanding of the house type, tell your own decoration concept to the designer, and then the designer will design professionally according to the situation of the house, and then you can sign the decoration contract and carry out formal decoration. In the process of decoration, the transformation of water, electricity, gas and heating is very important, and the steps of decoration need to be paid attention to, once the order of decoration is wrong, this will bring great trouble to the decoration.

The hard decoration stage of decoration is more complicated, which is the basic project of the whole decoration. First of all, for the place where the house is not needed, the demolition can be removed as much as possible, and then the indoor structure is transformed, the water and electricity are done after the acceptance, the filling is completed, the insulation and waterproofing are done, and then the wall tiles and closed water test are done, and then the cement of the ground needs to be smoothed and the floor tiles are pasted, and then the wall and the top gypsum are smoothed, and the putty needs to be scraped two or three times, and the putty needs to be polished after the completion of the latex paint, wallpaper or wall cloth, and the hard installation of the whole house can be completed and accepted. It can be seen from this that the decoration of the house is, you need to paste the floor tiles first, and then make the wall, the paint can be cleaned off when it falls on the floor tiles, and then the floor tiles are paved after the wall is done, and the cement mortar will stain the lower part of the wall.

It should be the last to lay the floor tiles, because starting to lay the floor tiles will smash the floor tiles during the renovation.

It is not that the floor tiles are laid first, and the current decoration is basically to install the door first, and then lay the floor tiles.

Of course, this is the case, so that the floor can be cleaner and easier to handle, which is very good and makes you more attractive.

Tile first.

The tiled floor is already flat, and you don't need to pay for leveling when you lay a wooden floor. In addition, there is no need to pay for the cost of removing tiles, and the cost of decoration can also be saved a lot. When laying wooden floors, check whether the tiles in your home are warped.

If there is one to pry open and then flatten, it is recommended to use laminate flooring when laying it.

There are many things to pay attention to when laying the floor, such as keeping the ground dry, tidy and flat when laying. In addition, the distance between the lower entrance of the door and the floor after laying is kept about 4 mm to prevent the door from sinking in the future and affecting the opening and closing of the door.

Paste the tiles first, and then restore.

Flooring is not done. The decoration system follows the basic principle of first up and then down, from the inside to the outside, and also considers the protection of the finished product, the construction period, the process and the convenience of construction.

The general practice is: first scrape putty on the wall and ceiling, only the paint process remains, and then pave the floor tiles, the wall tiles and the wall putty are not in the same area, which can be carried out synchronously, and finally brush the paint.

In the case of a tight construction period, the construction can be carried out in sections according to the room;

If the conditions are special, the floor tiles must be paved first, and the ceiling and wall must be constructed after the adhesive mortar hardens (more than three days in summer and more than seven days in winter), and then the roof and wall are constructed after the surface is covered with waste cardboard;

For rooms with both wall tiles and floor tiles, the wall tiles are constructed first, and the floor tiles are constructed later;

During the construction of the coating, the ground should be protected, and the parts that cannot be protected from the paint can be easily erased with alcohol;

Finally, the skirting is glued and the brick joints are treated.

Tile first. The wooden floor is the last to be almost finished, and the last wooden floor is pasted. Otherwise, it will be scratched.

Generally now, tiles are applied first, such as kitchens, balconies, bathrooms. And then the carpentry, the paint, and so on, and finally it's all done, and it's all done on the wooden floor.

Why do you have to lay both, in fact, as long as the wooden floor is very good, if you use both tiles first and then lay the wooden floor.

Wooden flooring is the last process. After laying out, the wardrobe will be installed. . .

The last step of decoration is the floor, first tiling, first bricklayer, then carpentry.

The height of the wall is fixed and easy to control, and the drop is easy to adjust, and the gap between the wall and floor tiles can be avoided from being too large, so as to make the overall paving effect more exquisite and beautiful. The first wall and then the floor can reduce the difficulty of wall leveling, improve construction efficiency, and ensure the construction progress. At the same time, it can also better protect the waterproof layer and reduce the damage to the floor tiles.

How to lay tiles?

Laying of wall tiles:

1. When the base layer is treated, the dirt on the wall should be cleaned up in time, and the wall should be watered and moistened one day in advance. If the wall of the base layer is hearty, when the cement mortar is dry, you can carry out the process of arranging bricks, elastic lines, and sticking towel wall tiles.

2. Before pasting the bricks, it must be soaked in water for more than 2 hours, and the bricks should not bubble, take them out to dry, and set aside.

3. When pasting tiles, when encountering the supporting parts of pipelines and bathroom equipment, it must be required to be cut and matched with a whole brick sleeve, and must not be pasted with non-whole bricks.

Floor tile laying:

1. Before the tile is used, it must be soaked in water for half a day, and the brick body shall not bubble.

2. There should be a slope of flowing water between the kitchen and bathroom to avoid the phenomenon of water accumulation in the future. If the waterproof layer is accidentally damaged during construction, the waterproofing must be redone, and there is no leakage in the 12-hour test of water accumulation.

3. After the ground tiles are laid, the brick surface must be covered with cardboard, and it will take at least 24 hours before you can walk on the brick surface.

What are the precautions for tile paving?

1. The tiles should be fully soaked.

Ceramic tiles should be fully soaked before paving, so that the pores in the tile absorb moisture, so that it is not easy to appear hollow and fall off when paving, if the tile is not soaked directly to the wall, it is very likely that the tile will directly absorb the moisture in the cement, when it reaches a certain extent, the tile will even be cautious and cracked, which will cause a large amount of waste of ceramic tiles, and the quality of the paving is not good.

2. The location of the first brick must be selected.

What are the precautions for laying tiles? After the above-mentioned tile soaking, it is necessary to determine the position of the first tile, which is very important, because the position of the first brick determines the position of the tile in the whole wall, so the position of the first tile must be selected, if the position of the first tile is wrong, the tile of the whole wall will be crooked.

3. Be sure to press the wall to the ground.

The wall pressing the ground is that the wall bricks should be on the floor drain mu bricks, the advantage of this is that there is no water, the water droplets in the wall will flow along the wall tiles to the surface of the floor tiles, easy to clean, because this is more troublesome, so some bricklayers find various reasons are not willing to do, this is the decoration owner must supervise the bricklayers, let them do the project well.